iLive ISBV39 User manual

MODEL: ISBV39
BLUETOOTH VOICE ACTIVATED GOOGLE/SIRI SPEAKER
Please read this user manual carefully to ensure proper use of this product
and keep this manual for future reference

2
IMPORTANT SAFETY INSTRUCTIONS
DANGEROUS VOLTAGE:The lighting flash with arrowhead symbol within
an equilateral triangle is intended to alert the user to the presence of
uninsulated “dangerous voltage” within the product’s enclosure that may
be of sufficient magnitude to constitute a risk of electric shock to persons.
A
TTENTION:The exclamation point within an equilateral triangle is intended to
alert the user to the presence of important operating and maintenance
(servicing) instructions in the literature accompanying the appliance.
WARNING:TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE
THIS UNIT TO RAIN OR MOISTURE.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
Warning:
- Batteries (a battery pack or installed batteries) shall not be subject to excessive
heat, such as direct sunlight, fire, or the like.
- Changes or modifications not expressly approved by the manufacturer could void
the user’s authority to operate this device.
- Usage of controls or adjustments of performance procedures, other than those
specified herein, may result in hazardous exposure.
- Recharge the battery when the device indicates that the battery is low.
- It is highly recommended to charge the battery immediately when the battery is low.
- To prolong the life of the battery, it is NOT recommended to use the device when it
is charging.
- To prolong the life of the battery, consider recharging its battery at least once per
month.
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE
COVER (OR BACK) OF THE DEVICE. NO USER SERVICEABLE PARTS ARE
INSIDE. PLEASE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
* This product is built with an internal rechargeable battery.
Cancer and Reproductive Harm-www.P65Warnings.ca.gov

This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of
the following measures:
●Reorient or relocate the receiving antenna.
●Increase the separation between the equipment and receiver.
●Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
●Consult the dealer or an experienced radio/TV technician for help.
FCC WARNING:
T
o assure continued operat
i
on,followthe attached insta
l l
ation instructions and
use onlyshield cables whenconnectingto otherdevices.Changes or
modif
i
cationsnotexpresslyapproved bythepartyresponsibleforcompliance
couldvoidthe user's authorityto operatethe equipment.
FCC NOTICE:
FCC STATEMENT:
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1)This device may not cause harmful interference, and
(2)This device must accept any interference received, including interference
that may cause undesired operation.
3
Trademark & RegulatoryStatements
Bluetooth® is aregistered trademark of Blue tooth SIG, Inc. Other
trade-marks and names arethose of their respective owners.
Google Play™ store and all Google Brand Features are trademarks or
distinctive brand features of Google Inc., LLC.
Apple App Store™ and Siri Assistant are registered trademarks of Apple Inc.
RF Exposure Information
The device has been evaluated to meet general RF exposure requirement.
The device can be used in portable exposure condition without restriction

PRODUCT OVERVIEW
7. Power On/Off, Mode Switch Button
3. Volume Down Button
1. Play/Pause, Hands-Free Button
9. Micro-USB Charging Port
6. Pairing Indicator
8. AUX-IN Jack
5. Built-in Microphone
4
1
2
3
5
6
7
4
TOP VIEW
REAR VIEW
8 9 10
10. Rubber Cover
4. Volume Up Button
2. Charging Indicator

4. While charging, the charging indicator light on the unit will turn red, it will turn off
when completely charged.
2. Insert the Micro USB connector of the included charge cable into the DC 5V input,
The unit has a built-in rechargeable battery, charge it before operation or when it is
drained as below:
D. Battery life naturally shortens slowly over time.
E. The rechargeable battery built into this product is not user replaceable.
A. Before first time use, charge approximately 4 hours until the unit is completely
charged.
B. Recharge and store the unit within the temperature range of 5°C~35°C
(40°F~95°F).
C. Do not charge longer than 24 hours. Excessive charging or running the unit
until the battery fully drains will damage battery. Battery life will be extended
if you keep the battery fully charged.
which serves as the speaker’s Micro USB port.
3. Plug the other end of the USB cable into a computer or other compatible device,
as shown below.
RECHARGING THE UNIT
NOTES:
5
1. Uncover the rubber cover of the unit.

BLUETOOTH OPERATION
4. Play a track on your paired device as you would normally.
list. Select it to establish a connection.
3. After a successful connection made, the mode indicator will be solid blue.
the pairing
2. Activate the Bluetooth menu on the device you wish to connect to the unit. Begin
While playing:
Press the “ ” Button to pause, and press it again to resume playing.
the mode indicator will begin to blink, alternating between blue and green.
Press the “ - ” or “+” button to adjust the volume level.
6
Hands-Free Function:
During an incoming call, press and hold the “ ” button to reject the call.
During an incoming call, press the “ ” button once to answer the call. Press it
again to end the call.
Press and hold the “ ” Button to reactivating bluetooth pairing mode.
a device search for the speaker. The pairing name " ISBV 39 " will appear on
1. Press and hold the “ SOURCE ” button to turn the device on. After powering on,
Double press the " " button to redial the last dialed number.
NOTE: In Bluetooth mode, it there is no connection for about 10 minutes, the unit
will enter standby mode.

7
1. Begin any Google Assistant voice command by addressing the speaker with
“Hey Google” or “Ok Google”.
2. Instruct the speaker to perform an activity using one of the Google Asssitant
voice commands, and the speaker will initiate immediately.
Once the speaker is set up as a Google Home device, you can control the operation
of the speaker with Google Assistant using just your voice.
USING GOOGLE ASSISTANT
INSTALLING GOOGLE ASSISTANT
1. Access the Google Play Store or Apple App Store from your smartphone device.
2. Install the Google Home app onto your smartphone device.
3. Establish a wireless connection from the wireless router to your smartphone.
If Wi-Fi is not available, you can use data.
* The Google Home app uses Bluetooth to identify the speaker.
settings for the speaker.
4 . Activate the Bluetooth functionality on your smartphone device.
5 . Open the Google Home app and follow the on-screen instructions to set the initial

SETTING UP SIRI ASSISTANT
1. To set up Siri Assistant on your speaker, you need an iPhone, iPod touch, or
iPad with iOS 12 or later.
2. To begin, ensure that your iOS device has Bluetooth mode turned.
3. Plug in and turn on the speaker. Then hold your unlocked iOS device within a few
centimeters of the speaker, until the setup screen appears. Tap “Set Up” and
follow the on-screen instructions.
Note: If the setup screen does not appear automatically, open the Home app on
iOS device, tap the , then tap Add Accessory. Tap “Don’t Have a Code or Can’t
Scan?”, then select the speaker in the Nearby Accessories list. If you do not have
Home app already installed, you can download it from the App Store.
4. Listen for “Hey Siri” in the Siri & Search settings menu of your iOS device.
Once Siri Assistant has been set up on your speaker, you can fully control the unit
using voice commands, allowing you to open and utilize any function on your phone.
1. When addressing the speaker, be sure to speaker clearly in your requests into
the microphone of the speaker, say “Hey Siri” to activate Siri for your iOS device.
2. Siri Assistant can be used for GPS purposes, to ask about the weather, the latest
traffic updates, check your flight times, play all of your favorite music and playlists,
browse through your photos, check your emails, and much more.
8
USING SIRI ASSISTANT

Mobile Phone
Connect to the hone
audio device s
( MP3 layer, mobile phone, or
iPod/iPad, etc.)
MP3
AUX IN
3. Insert the other end of the auxiliary cable into the speaker’s Aux-input jack.
6. Play music on the external device as you would normally.
2. Insert one end of the auxiliary cable into the external device’s Aux-output jack.
AUX IN
9
will be solid Green.
1. Uncover the rubber cover at the rear of the unit.
4. Press and hold the “ S O UR C E ” button to turn the device on.
5. Press the “ S O UR C E ” button to switch to AUX IN mode. The mode indicator

Check the following before requesting service:
SYMPTOM POSSIBLE CAUSE POSSIBLE SOLUTION
Won’t turn on Built-in battery is dead Recharge the battery
Volume level of paired/connected device
is set to a low level
Raise the volume level of the
paired/connected device
Volume level of the connected/paired
device is set too high
Reduce the volume level of the
connected/paired device
BT not
unctioning
The external BT device did NOT pair to
the speaker successfully
Pair the external BT device to the
speaker
The external BT device is too far away
from the speaker
Place the external BT device
closer to the speaker
SPECIFICATIONS AND ACCESSORIES ARE SUBJECT TO CHANGE
WITHOUT NOTICE
f
No sound or
weak sound
Sound
distortion
ACCESSORIES:
SPECIFICATIONS
TROUBLESHOOTING GUIDE
Bluetooth working range: up to 32 feet in open area
1 x User Manual
1 x USB Charging Cable
10
Power source: Built-in DC 3.7V, 1800mAh rechargeable battery
Recharge by DC 5V through Micro USB port
Bluetooth Version: V5.0
Audio Output Power: 5 W (RMS)