Iluv I166 User manual

Stereo Audio System for Your iPod®

Instruction Manual

Model: i166

Please read this manual carefully before operating and save it for future reference.

Have a question? Please visit http://www.i-Luv.com

iLuvTM Stereo Audio System for Your iPod V11M11_IM_EN_10172007

www.i-Luv.com- 1 -

USER SAFETY GUIDE

INSTRUCTIONS ON ENVIRONMENT PROTECTION

Do not dispose of this product in the usual household garbage at the end of its life cycle; bring it to a collection point for the recycling of

electrical and electronic appliances. This symbol on the product means the instructions for use or the packing will inform about the methods

for disposal. The materials are recyclable as mentioned in its marking. By recycling, material recycling, or other forms of re-utilization of old

appliances, you make an important contribution to protect the environment. Please inquire at your local community administration for the

authorized disposal location.

IMPORTANT SAFETY WARNINGS

1. FCC regulations state that any change or modification to the equipment, not expressly approved by maker or its authorized parties, could void the

user’s authority to operate this equipment.

2. To prevent fire or electric shock, do not expose the unit to rain or moisture.

3. Never attempt to open the cabinet. Always refer servicing to a qualified technician.

IMPORTANT SAFETY INSTRUCTIONS

1. READ INSTRUCTIONS - All the safety and operating instructions should be read before the appliance is operated.

2. RETAIN INSTRUCTIONS - The safety and operating instructions should be retained in a secure place for future reference.

3. HEED WARNINGS - All warnings on the appliance and in the operating instructions should be observed.

4. FOLLOW INSTRUCTIONS - All operating and use instructions should be followed.

5. WATER AND MOISTURE - The appliance should not be used near water. For example: near a bathtub, kitchen sink, laundry tub, and/or swimming

pool.

6. HEAT - The appliance should be situated away from heat sources such as radiators, heat registers, stoves, or other appliances (including amplifiers)

that produce heat.

iLuvTM Stereo Audio System for Your iPod V11M11_IM_EN_10172007

www.i-Luv.com- 2 -

USER SAFETY GUIDE

IMPORTANT SAFETY INSTRUCTIONS – CONTINUED

7. POWER SOURCES - The appliance should be connected to a power supply only of the type described in the operating instructions or as marked on

the appliance.

8. CLEANING - The appliance should be cleaned with a dry cloth.

9. OBJECT and LIQUID ENTRY - Care should be taken so that objects do not fall and liquids are not spilled into the device’s openings.

10. CARTS AND STANDS - The appliance should be used only with a cart or stand that is recommended by the manufacturer. An

appliance and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the

appliance and cart combination to overturn

11. DAMAGE REQUIRING SERVICE - The appliance should be serviced by qualified service professional when:

a. The power-supply cord or plug has been damaged.

b. Objects have fallen into, or liquid has been spilled into the appliance’s apertures.

c. The appliance has been exposed to rain.

d. The appliance has been dropped and suffered damage.

e. The appliance does not appear to operate normally, or exhibits a change in performance.

12. SERVICING - The user should not attempt to service the appliance beyond that described in the user's operating instructions. All other servicing should

be referred to qualified service professional.

13. BATTERY USAGE – To prevent battery leakage, which may result in bodily injury, property damage or damage to the unit, follow these instructions:

a. Install all batteries correctly according to the polarity (+ -) as marked on the unit.

b. Do not mix old and new batteries, carbon and alkaline, etc.

c. Remove batteries from the unit when the device will not be used for an extended period of time.

14. LEAD AND MERCURY - This product may contain lead and/or mercury. Disposal of these materials may be regulated by your local authorities due to

environmental considerations. For more detailed disposal or recycling information, please contact your local authorities or the EIA (Electronic Industries

Alliance) – http://www.eiae.org

iLuvTM Stereo Audio System for Your iPod V11M11_IM_EN_10172007

www.i-Luv.com- 3 -

USER SAFETY GUIDE

FOR USERS IN THE USA

As specified in Part 15 of the FCC Rules, this equipment complies within the limits of a Class B digital device. These restrictions provide sufficient protection

against radio and TV interference in residential areas. However, even during normal operation, this device may cause TV or radio interference. In attempting

to eliminate some or all interference, you should try one or more of the following corrective measures:

1. Increase the distance between the device and the radio and/or TV

2. Try a different outlet on various electrical circuits for the device, the radio and/or TV.

3. Reposition the receiving antenna

Do not attempt to fix technical problems yourself if they continue to still exist. Refer servicing only to a qualified technical professional. Interfering or

modifying with your product’s internal components may cause a malfunction and an invalidation of the system’s warranty. This tampering can also void the

FCC authorization to operate it.

This device complies with Part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference.

IMPORTANT NOTES

Since digital circuitry may cause interference to other radio or television tuners nearby, switch this unit off when not in use or move it away from the affected

radio/television tuner.

FOR USERS IN CANADA

This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus as set out in the Radio Interference Regulations of

Industry Canada. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment

generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference

to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful

interference to radio or television operation (which can be determined by turning the equipment off), the user is encouraged to try to correct the interference

by one or more of the following measures:

•Reorient or relocate the receiving antenna.

•Increase the separation between the equipment and receiver.

•Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

•Consult the dealer or an experienced radio / TV technician for help.

iLuvTM Stereo Audio System for Your iPod V11M11_IM_EN_10172007

www.i-Luv.com- 4 -

TABLE OF CONTENTS

Getting Started

General features ……………………………………………………………………………………………………………………………………………...… 5

Power Source…………….……………………………………………………………..………………………………………………………..……………... 6

Protect your Furniture ………………..……………………….……………………………………………………………………………………………….. 6

Installing the remote control battery ….....………………………………………………………………………………………………………….………… 6

Installing the dock adapter …………………………………………………………………………………………………………………………………….. 7

Location of controls on the main unit ……………………………………………………………………………………………………………….…...…… 8

Location of controls on the remote control …………………………………………………………………………………………………………………... 10

Location of indications on the LCD screen …...……………………………………………………………………………………………………………... 11

Setting the clock …….....…………….…………...……………………………………………………………………………………………………………. 11

Operational Instructions

Setting the alarm ………………………………………………………………………………………………………………………………………..……… 12

Using the Snooze Function ……………………………………………………………………………………………………………………………………. 12

Using the Sleep Function ……………………………………………………………………………………………………………………………………… 12

Listening to your iPod ………………………………………………………………………………………………………………………………………….. 13

Controlling your iPod using the Remote Control ……………………………………………………………………………………………………………. 13

Listening to the Radio ………………………………………………………………………………………………………………………………………….. 13

Charging your iPod ……………………………………………………………………………………………………………………………………………. 14

AUX In …………………………………………………………………………………………………………………………………………………………… 14

Subwoofer Out ………….………………………………………………………………………………………………………………………………………. 15

Adjusting the brightness of the LCD screen ………...………………………………………………………………………………………………………. 15

Resetting the Unit …………………………………………………………………………………………………………………………..………………….. 15

Back Up Function ………………………………………………………………………………………………………………………………………………. 15

Maintenance …………………………………………………………………………………………………………………………………………………….. 15

Troubleshooting Guide ……………………………………………………………………………………………………………..……………………………… 16

iLuvTM Stereo Audio System for Your iPod V11M11_IM_EN_10172007

www.i-Luv.com- 5 -

GETTING STARTED

Congratulations on your purchase of the new iLuvTM i166 for your iPod. Targeted specifically to work with iPod, iLuv stereo audio system with the built-in

universal dock provides advanced audio and radio performance that brings out the best in your music. Do not forget to keep this manual for future reference.

Stereo Audio with iPod dock and AM/FM, Dual Alarm Clock

•Powerful built-in speakers allow you to hear and enjoy your music.

•Digital clock display with dual alarm function

•High and low dimmer control

•Sleep or wake to your iPod, AM/FM radio or Buzzer

•Charges your iPod

•Integrated universal dock for your iPod

•Auxiliary line input for 1st and 2nd generation iPod and other audio devices*

•Subwoofer output jack for bass boost sound effect (subwoofer speaker not included)

•AM/FM radio with PLL digital tuning technology

•Liquid crystal display with blue backlight

•Full function 18-key remote control included (also controls your iPod)

In the box

•Stereo audio system

•Remote control (battery included)

•Dock adapters

•Instruction manual

•Warranty card

*Any Audio Device with 3.5 mm output (iPod Shuffle 1st and 2nd Gen., MP3, CD, DVD players, Laptops, PDAs, etc.)

iLuvTM Stereo Audio System for Your iPod V11M11_IM_EN_10172007

www.i-Luv.com- 6 -

GETTING STARTED

Power Source

•This system is designed to operate on 120V AC 60Hz house current only.

•Connecting this system to any other power source may cause damage to the system and such damage is not covered by your warranty.

•Main plug is used as the disconnect device, the disconnect device shall remain readily operable.

Note: The system has an AC plug and will only fit into matching AC outlets. This is a safety feature to reduce the possibility

of electric shock. If the plug will not fit in your AC outlets, you should have the outlet changed by a qualified, licensed

electrician. Do not use an adapter to make the plug fit into your outlet. This defeats the safety feature and could expose you

to electric shock.

Protect your Furniture

This model is equipped with non-skid rubber 'feet' to prevent the product from moving when you operate the controls. These 'feet' are made from non-

migrating rubber material specially formulated to avoid leaving any marks or stains on your furniture. However certain types of oil based furniture polishes,

wood preservatives, or cleaning sprays may cause the rubber 'feet' to soften, and leave marks or a rubber residue on the furniture. To prevent any damage

to your furniture we strongly recommend that you purchase small self-adhesive felt pads, available at hardware stores and home improvement centers

everywhere, and apply these pads to the bottom of the rubber 'feet' before you place the product on fine wooden furniture.

Installing the Remote Control Battery

The remote control battery has been previously installed and ready for operation for the first time use. When the remote control

stops functioning, replace the battery with a new one. To do so, locate the battery compartment and follow the steps below:

1. Slide out the battery holder from the remote control case.

2. Insert a “CR2025” 3V lithium battery making certain to follow the correct polarity. Observe the corresponding symbols (+/-).

3. Secure battery and push the battery holder back into the remote control until it is fully inserted.

iLuvTM Stereo Audio System for Your iPod V11M11_IM_EN_10172007

www.i-Luv.com- 7 -

GETTING STARTED

Installing the Dock Adapter

To ensure that your iPod will fit properly into the built-in universal dock, we have included several detachable dock adapters for old iPod players with this

product. Please check the bottom of dock adapters to see the compatibility with your iPod.

1. How to insert a dock adapter

a. First choose the dock adapter that corresponds with the type of iPod you would like to dock. Using the correct dock adapter ensures the

proper fit for your iPod.

b. Gently push the dock adapter down into the universal dock.

c. Carefully place your iPod into the universal dock. Your iPod must not be in a case or “Skin”.

2. How to remove the dock adapter

•Remove your iPod first, then grasp the dock adapter and lift upwards carefully.

iLuvTM Stereo Audio System for Your iPod V11M11_IM_EN_10172007

www.i-Luv.com- 8 -

GETTING STARTED

Location of Controls on the Main Unit

9 10 11 12

1. POWER/FUNCTION Button

2. VOLUME +/- Button

3. TIME/MEMORY Button

4. PLAY/PAUSE Button

5. 30 PIN/iPod Connector

6. PRESET UP/DOWN Button

7. ALARM 1/2 Button

8. SLEEP Button

9. TUNE/SKIP Backward Button

10. SNOOZE Button

11. TUNE/SKIP Forward Button

12. LCD Display

13. Stereo Speakers

Top View

Front View

iLuvTM Stereo Audio System for Your iPod V11M11_IM_EN_10172007

www.i-Luv.com- 9 -

GETTING STARTED

Location of Controls on the Main Unit- continued

14.

UX IN Jack

15. SUBWOOFER OUT Jack

16. AC Power input

17. FM Antenna

18. BATTERY Compartment

Back View

Bottom View

iLuvTM Stereo Audio System for Your iPod V11M11_IM_EN_10172007

www.i-Luv.com- 10 -

GETTING STARTED

Location of Controls on the Remote Control

Note: The included remote control commands all of the basic functions on i166. Aim the remote control towards the center of the main unit for the best

results. Please note that the provided remote control cannot control iPod shuffle, first generation iPod, and second generation of iPod.

To install a new battery, please refer to the section “Installing the Remote Control Battery”.

1. STANDBY/SOURCE Button

2. iPod UP Button

3. MENU/MODE Button

4. TUNE/SKIP Backward Button

5. iPod DOWN Button

6. STEREO Button

7. ALARM Button

8. SLEEP Button

9. MUTE Button

10. STOP Button

11. PLAY/PAUSE Button

12. SNOOZE Button

13. ENTER Button

14. TUNE/SKIP Forward Button

15. MEMORY UP Button

16. MEMORY DOWN Button

17. VOLUME + Button

18. VOLUME - Button

iLuvTM Stereo Audio System for Your iPod V11M11_IM_EN_10172007

www.i-Luv.com- 11 -

GETTING STARTED

Location of Indications on the LCD Screen

Setting the Clock

1. While the unit is at STANDBY mode, press and hold TIME/MEMORY button on the top panel or the

remote control for 2 sec. to enter Clock set mode. The display will flash “12H” indicating that the clock

is set to 12 hour format.

2. Press TUNE/SKIP button on the top panel or remote control once to change the clock format to 24 hour

time. The display will change from “12H” to “24H”.

3. Press the TIME/MEMORY button to confirm. The hour digit will begin flashing. Press TUNE/SKIP button

on the top panel or remote control to set the hour. Press TIME/MEMORY button to confirm.

4. While hour is confirmed, minute digit will begin flashing. Press TUNE/SKIP button on the top panel or

remote control to set the minute. Press TIME/MEMORY button to confirm.

1. STEREO FUNCTION indication

2. PM indication (12 hour setting)

3. TIME/RADIO FREQUENCY display

4. AM/FM MODE display

5. ALARM FUNCTION indication

6. AUX MODE display

7. iPod MODE display

8. RADIO FREQUENCY UNITS display

9. SLEEP FUNCTION indication

10. WAKE UP MODE indication

iLuvTM Stereo Audio System for Your iPod V11M11_IM_EN_10172007

www.i-Luv.com- 12 -

OPERATIONAL INSTRUCTIONS

Setting the Alarm

The Alarm 1 and Alarm 2 functions can only be set while the i166 is in STANDBY mode.

1. While the unit is at STANDBY mode, press and hold ALARM 1 button on the top panel for two (2) sec. and

the hour digit will begin flashing. Press TUNE/SKIP button to set the hour. Press ALARM 1 button to confirm.

2. Minute digit will begin flashing, press TUNE/SKIP button to set the minute. Press ALARM 1 button to confirm.

3. Wake up mode display will begin flashing, press TUNE/SKIP to select the below:

•Wake to FM radio. Pre–tune your desired radio channel in FM radio mode before setting the wake up function.

•Wake to AM radio. Pre–tune your desired radio channel in AM radio mode before setting the wake up function.

•Wake to your iPod.

•Wake to Buzzer.

4. When the wake up mode is selected, press ALARM button again to confirm until the Alarm indicator appear on the display.

Notes: For Radio wake up and iPod playback, the default volume is 10 and will increase to 16 gradually. The volume of buzzer will not change. If the wake

up mode is set to iPod playback with no iPod connected, it will become the buzzer alarm.

•To set Alarm 2, press and hold the ALARM 2 button and repeat steps 1 to 4 above.

Using the Snooze Function

After Alarm is ON, press SNOOZE button on the top panel or remote control to temporarily deactivate the alarm which will activate again after 9 minutes.

Press either the ALARM1/ALARM2 buttons or the POWER/FUNCTION button to switch off the Alarm.

Using the Sleep Function

Press the SLEEP button on the top panel or remote control, “2:00” and the sleep indication will turn ON. Press the SLEEP button

again to change and select from “2:00” to “1:30”, “1:00”, “0:30”, “0:20”, “0:10”, “0:05” or “OFF”. Selectinig “OFF” disables the sleep

function. While the sleep function is activated, press the SLEEP button once and the remaining sleep time will be shown. Press the

SLEEP button again to select other sleep times.

iLuvTM Stereo Audio System for Your iPod V11M11_IM_EN_10172007

www.i-Luv.com- 13 -

OPERATIONAL INSTRUCTIONS

IMPORTANT:

1. Occasionally, files on your iPod may become corrupted. This may cause erratic behavior with your iLuv products. Apple recommends visiting their

website www.apple.com to obtain instructions on resetting or restoring your iPod to factory settings.

2. It is imperative to your iPod and the built-in universal dock that you use the correct dock adapter for your iPod and that the dock adapter fits

appropriately into the built-in universal dock. Ignoring these rules can cause severe damage to your iPod. Please refer to the section “Installing the

Dock Adapter” to install the dock adapter properly before operating i166 with your iPod.

Listening to your iPod

1. Press the POWER/FUNCTION button on the top panel or remote control to Power on the unit.To select iPod mode, press the

POWER/FUNCTION button again until the “iPod” icon is shown on the top of display.

2. While the iPod mode is on, insert your iPod to the universal dock and it will switch from play mode to pause mode or from

pause mode to play mode. If the unit is not connected to an iPod, the background light will remain on, insert the iPod into the

dock and press PLAY to continue playback.

3. Press the PLAY/PAUSE button on top panel or remote control to control the play and pause functions.

4. Press the TUNE/SKIP button on top panel or remote control to select previous or next song.

5. Press the VOLUME + / VOLUME – button on top panel or remote control to adjust the VOLUME level of this unit as desired.

Controlling your iPod using the Remote Control

Press the MENU/TIMER/MEMORY button on the remote control, the iPod will go to the previous menu. Press the iPod UP/ DOWN button on the remote

control to select up or down of the iPod menu; then press the ENTER button to enter selected menu.

Listening to the Radio

Note: Unwind and extend antenna to its full length. It may be necessary to adjust the direction of this wire antenna until you find the

position that provides the best reception for your favorite FM stations.

1. Press the POWER/FUNCTION button on the top panel or remote control to Power on the unit. To select FM or AM radio, press

the POWER/FUNCTION button until “FM” or “AM” icon is shown on the top of display.

2. FM/AM frequency will show on the display.

iLuvTM Stereo Audio System for Your iPod V11M11_IM_EN_10172007

www.i-Luv.com- 14 -

OPERATIONAL INSTRUCTIONS

3. Tune to the desired frequency as follows:

a) Automatic Tuning

i) Press and hold the TUNE/SKIP button on the top panel or remote control for two (2) seconds. Auto tuning will start.

ii) The tuner will search the frequency for the next strong station and stop on that station. Repeat this procedure until the tuner stops on your

desired station.

b) Manual Tuning

Repeatedly press the TUNE/SKIP buttons on the top panel or remote control until the frequency of the desired station appears on the display.

After entering the radio mode for about 20 seconds, the display will show the time mode again. Press the TIME/MEMORY button again to show the radio

frequency.

4. Preset AM/FM stations in the tuner memory

This unit includes a 20 station preset memory. Store up to 10 FM stations and 10 AM stations in the tuner memory for immediate recall. The procedure

for storing stations in memory is as follows:

a) Preset AM/FM channel

i) Follow instructions under “Listening to the Radio” to select the first station you wish to memorize and the FM

frequency will show on the display. For example: FM 91.8 MHz.

ii) Press and hold the TIMER/MEMORY button on the top panel or remote control, the preset channel number “01” begins

flashing on the display

iii) Press the PRESET +/- button on the top panel or remote control to select preset channel (CH 01 to CH10)

iv) Press the TIME/MEMORY button on the top panel or remote control again to confirm.

v) Repeat step i) to iv) to until you have memorized up to 10 stations. Press the PRESET+/- button on the top panel or remote control to listen to

preset AM/FM channel CH01-CH10 at AM/FM mode.

Note: The saved preset station will be lost if the AC Power is interrupted and the backup battery is not inserted.

Charging your iPod

If your iPod is connected to the unit, it will charge automatically at either STANDBY Mode, iPod Mode, FM Mode or AUX Mode.

Note: Your iPod can not charge when the i166 is in AM radio mode.

AUX In

Connect the Audio Output jacks of your auxiliary sound source (TV, VCR, DVD Player, Cassette Deck, Mini Disc player, etc., etc.,) to the AUX IN jack on the

back panel of the unit. The auxiliary function will only activate when the aux in jack is fitted with connection cable.

iLuvTM Stereo Audio System for Your iPod V11M11_IM_EN_10172007

www.i-Luv.com- 15 -

OPERATIONAL INSTRUCTIONS

AUX In-continued

1. Press the POWER/FUNCTION button on the top panel or remote control to select AUX function. “AUX” will show on the top of the display

2. Turn your auxiliary source ON and operate it as usual. The sound from the auxiliary source will be heard through the speakers of the i166.

3. Adjust the VOLUME level controls of this unit and the auxiliary sound source as desired.

Note: Connection cables are not included with this unit.

Subwoofer Out

Connect the Audio Output jacks of your active subwoofer to the SUBWOOFER OUT jack on the back panel of the unit. Then the unit will become a 2.1

system and the bass would be able to sound from the external active subwoofer.

Note: The connection cables and active subwoofer are not included.

Adjusting the Brightness of the LCD Screen

During STANDBY mode, press the SNOOZE button on top panel or remote control to adjust the brightness of the display. It will return to normal after eight

(8) seconds. During playback function, Press the SNOOZE button to interchange the dimmer and brightness display.

Resetting the Unit

If the system does not respond, there may have been a power surge that triggered the internal computer to shut down automatically. If this occurs,

disconnect the main power and connect it again after approximately one minute.

Note: Although the power disconnection will unlock the internal computer after a power surge, it will also erase all of the settings. After turning the unit ON, it

may be necessary to reset.

Back Up Function

If the AC supply is interrupted, the clock display and preset radio stations will go off and all settings will be canceled. To back up the

clock and preset stations, insert two “AA” size batteries (not supplied) in the battery compartment in the base of the unit. The

batteries will not save alarm clock settings. The back up battery does not provide operation of your iPod.

Note: Always use Alkaline batteries and remove the batteries when the unit is not to be used for an extended period of time.

Maintenance

•Place the unit on a level surface away from sources of direct sunlight or excessive heat.

•Protect your furniture when placing your unit on a natural wood and lacquered finish. A cloth or other protective material should be

placed between it and the furniture.

•Clean your unit with a soft cloth moistened only with mild soap and water. Stronger cleaning agents, such as Benzine, thinner

or similar materials can damage the surface of the unit.

iLuvTM Stereo Audio System for Your iPod V11M11_IM_EN_10172007

www.i-Luv.com- 16 -

TROUBLESHOOTING GUIDE

•The stereo speaker system (i166) does not turn on.

oThe AC plug may not be connected properly. Check the connection.

oThe wall outlet may not function. Try another outlet.

•Your iPod does not fit into the built-in universal dock.

oThe installed dock adapter is not the correct one. Check whether a correct dock adapter is installed.

oThere might be some obstructions on the dock. Check whether there are any obstructions on the connector and on the dock. If everything is

secured, place your iPod back into the dock.

•It does not recognize your iPod when docked.

oYour iPod may not be properly docked. Take your iPod out of the dock, and remove any obstructions on the connector from the dock and on

your iPod. Place your iPod back into the dock.

oYour iPod is frozen or locked up. Check whether your iPod operates correctly before placing it back into the dock. Please refer to the owner’s

instruction manual of your iPod.

oThe software of your iPod is outdated. Upgrade the software on your iPod. For the details on how to upgrade the software on your iPod,

please visit Apple’s website: http://www.apple.com.

•Your iPod is not charged even though it is in the dock.

oYour iPod might not be properly docked. Take your iPod out of the dock, and remove any obstructions on the connector from the dock and on

your iPod. Place your iPod back into the dock.

oYour iPod is frozen or locked up. Check whether your iPod operates correctly before placing it back into the dock. Please refer to the owner’s

instruction manual of your iPod.

•There is no sound on the external subwoofer speaker when connected by the audio patch cable.

oi166 supports iPod audio output only.

oThe connected subwoofer speaker lacks a power source. Active-type subwoofer speaker must be used.

iLuvTM Stereo Audio System for Your iPod V11M11_IM_EN_10172007

www.i-Luv.com- 17 -

TROUBLESHOOTING GUIDE

•It does not find any AM radio stations, or there is a lot of static on a radio station.

oThe AM loop antenna is not connected to the i166. Connect the AM loop antenna to the jack on the back of the i166.

oThe i166 is installed where the reception is bad. Move the AM loop antenna around keeping it away from the main unit for the best reception.

•When playing music, the sound gets distorted.

oThe volume level on the connected device or the i166 is set too high. Decrease the volume until the distortion has disappeared.

oThe source sound is distorted. If the original sound source (MP3) on your iPod is poor quality, the distortion and noises are easily noticed with

high-power speakers. Try a different audio source like a music CD to test.

•The remote control does not operate properly.

oThe installed battery is weak. Replace with a new battery.

oIt is not aimed to the i166 or too far away from it. Move within 20 feet of the unit and point the remote control toward the i199.

•Remote functions like play/pause skip up, skip down does not work

oDepending on the device these functions might be disabled due to differences in software.

oPlease refer to owner’s manual of the device you are using.

iLuvTM Stereo Audio System for Your iPod V11M11_IM_EN_10172007

www.i-Luv.com- 18 -

SPECIFICATIONS

•20 preset radio station memories (10 AM / 10 FM)

•120 minutes sleep

•9 minutes snooze

•Audio Output: 2 x 2.5W RMS

•3.5mm Aux-in jack

•3.5mm subwoofer output jack

•Frequency Range: AM: 520 kHz – 1710kHz FM: 87.5 MHz – 108.0MHz

•Power Supply: AC120V 60Hz

•DC 3V battery for clock back up: 2×1.5 AA size (UM-3)

iLuv is a trademark of jWIN Electronics Corp. iPod is a trademark of Apple, Inc. All logos and brands are property of their respective owners. iPod is not

included in this package. Features and specifications are subject to change without prior notification.

be reproduced or transmitted in any form without the expressed written consent of jWIN Electronics Corp. by any means, electronic or mechanical, including

photocopying, recording or use of an information storage and retrieval system. Any unauthorized distribution or reproduction of this printed material or