Ilva IDPI-16090 User manual

Assembly Instruction
PINCH Dining table
IDPI-16090 / IDPI-18090 / IDPI-200100
IDPI-220100 / IDPI-240100
01.06.2021
160x90 cm x H:74
180x90 cm x H:74
200x100 cm x H:74
220x100 cm x H:74
240x100 cm x H:74
I
M
F
J
N
G
K
O
H
L
I
M
F
J
N
G
K
O
H
L
I
M
F
J
N
G
K
O
H
L

Kære Kunde
Tillykke med dit nye køb.
Følg disse råd og få det bedste
resultat, når du samler produktet.
Læs vejledningen grundigt, før du går i gang.
Find hjælp, hvis I skal være to til at samle møblet.
Tjek at pakken indeholder alle dele på
materialeoversigten.
Saml møblet på et blødt underlag, så du undgår ridser.
Følg vejledningen nøje.
Efterspænd møblet efter en måned.
Gem denne vejledning.
Afsæt god tid.
Nogle møbler kan samles på få minutter. Andre – der
f.eks. består af flere dele – kan tage over en time at
samle. Afsæt god tid eller gør evt. arbejdet af flere
omgange.
Mangler du enkeltdele, eller har du spørgsmål til
Samlevejledningen kontakt kundeservice på ilva.dk.
Venlig hilsen
ILVA
Anbefalet Recommended
Dear Customer
Congratulations on your new purchase.
Follow this advice and get the best
Result when assembling the product.
Read the instruction carefully before you start.
Get help, if two persons are required for assembly.
Make sure, you have all parts on the total material list.
Work on a soft, flat surface to avoid any damage to the
finish.
Follow the assembly instruction.
Tighten the furniture joints after a Month.
Keep the assembly instruction.
Allocate good time.
Some furniture can be assembled in minutes. Others –
e.g. products in several parts – can take more than an
hour to finish. Make sure to allocate good time or
divide up the work.
If any parts are missing or you have questions for the
Assembly instruction contact support at ilva.dk.
Best regards
ILVA
Tools needed Don’t´use!!!
8x70
8x40

Total material list, hardware
M6x60/x8 Ø10x46/x8 Ø15x19/x8 Ø10x12/x8 Allen key/x1

Total material list, furniture parts
Tabletop/x1 Legs/x2 Plint/x2

Material list
M6x60/x8 Ø10x46/x8 Ø15x19/x8 Ø10x12/x8 Allen key/x1 Tabletop/x1
Legs/x2 Plint/x2 Number/x0 Number/x0 Number/x0 Number/x0
I
M
F
J
N
G
K
O
H
L
I
M
F
J
N
G
K
O
H
L
I
M
F
J
N
G
K
O
H
L

ASSEMBLY INSTRUCTION 1
ASSEMBLY INSTRUCTION 2
I
M
F
J
N
G
K
O
H
L
I
M
F
J
N
G
K
O
H
L
M6x60/x8
Please ensure that the holes are lined up with
the holes in the end of the plint, so the bolts in
step 4 can be connected.
M15x19/x8
I
M
F
J
N
G
K
O
H
L
I
M
F
J
N
G
K
O
H
L

ASSEMBLY INSTRUCTION 3
ASSEMBLY INSTRUCTION 4
I
M
F
J
N
G
K
O
H
L
I
M
F
J
N
G
K
O
H
L
Ø10x46/x8
Ø10x12/x8
Mount the Ø10x46 screws in both legs.
Connect the legs to the plints. Please ensure
that the holes allign, so the Ø10x12 screw
can be inserted and tightened.
I
M
F
J
N
G
K
O
H
L
I
M
F
J
N
G
K
O
H
L

ASSEMBLY INSTRUCTION 5 (optional)
If you have ordered end leaves for your table, this can be installed by
mounting the 2 rails to the table with thumb screws.
After that the leaves can be placed on top of the rails and
mounted with the thumb screws.
NB:
The table is here shown upside/down to illustrate the mounting – the leaves
are to be mounted while the table is standing on the legs.
TIP:
Do not tighten the thumb screws until all is mounted. Then adjust the
leaf to fit perfectly and then tighten the thumb screws.
IMPORTANT!
—
Only use the thumbscrews together with the rail
mounts and do not “store” the thumbscrews in
the tabletop or leaf, when not in use.
The thumbscrews are longer than the tabletop/
leaf is thick, and can potientially break the
surface of it if the thumbscrew is tightened
with too much force.

Max load
Evenly distribute the weight
on the table!