IN DEVICE Dallas 2 User manual

User Manual
Tool for two-distance
simultaneous measuring
The owner of IN DEVICE brand is:
BMKL Group Lackosz Genral Partnership
Grunwaldzka Street 93/6
32-540 Trzebinia
TAX ID 628-227-80-91

Dallas2 is an innovative tool for measuring two distances
simultaneously, which uses two laser rangefinders. It is
intended for use in construction and industry. Please read
the user manual before using the tool. When handing over
the product to another user, please also hand over these
instructions. Please follow all warnings and information
included in the manual.
Important information and tips
useful for use
Warnings for situations that
threaten safety, life and
property damage
The device is compatible
with the Machinery Directive 2006/42 / EC Country of origin: Poland
The device has been manufactured in modern, environmentally safe plants without
affecting nature.
Please read the instruction manual!
Dear Customers,
Thank you for choosing IN DEVICE brand. We hope that our
product using the latest technologies will prove to be
extremely satisfactory.
CONTENTS
1 Product description
1.1 General description
1.2 Dallas 2 construction
1.3 Dallas 2 use
1.4 Directions for use
2 Technical characteristics
3 Safety and environmental protection
3.1 General safety rules
3.2 Storage
4 Transport, cleaning and maintenance
4.1 Maintenance
4.2 Storage
4.3 Transportation
5 Utilization and scrapping
5.1 Utilization and scrapping
5.2 Product packaging
6 From manufacturer
2
Dallas 2- user manual
3
3
4
4
5
7
8
8
9
10
10
10
10
12
11
11
12

Product description1
1.1 General description
3
Dallas 2 –user manual
Table of Dallas 2 items
1. Frame
2. Frame and handle connection
3. Handle
4. Bolts connecting handle and frame
5. Rangefinders clamp bolt
6. Pressure knob
7. Sliding clamps
8. Arm sliding spacers
9. Handle fixing bolt
10. Body sliding spacers
11. Straps for inserting rangefinders in the socket
Product description1
1.2 Dallas 2 construction
4Dallas 2- user manual
Dallas2 is made of an aluminum structure that serves as the
mounting piece for rangefinders. Rangefinders are
tightened by means of clamps moved by a screw with a
knob. The applied handle allows the user to maneuver the
marker. The distances placed on the bottom of the marker
protect the measuring surface against scratches while
maneuvering the marker. The straps that are pulled on the
arms of the structure additionally protect the laser
rangefinders against falling out of their sockets and help
fixing them to the frame. The stabilizing straps do not
obscure visibility or limit the operation of rangefinders.
Each measurement of the distance of a target point on the
surface of a wall or a ceiling is made by indicating at least two
coordinates X and Y with the given values. Most frequently, the
coordinates are 90 degrees to each other. The Dallas 2 marker
is used to mark such points by directly measuring in two
directions. It is intended for use in construction and industry.
Using the Dallas 2 shortens the measurement time. It increases
the safety of measurements in difficult conditions by, for
example, reducing the use of conventional measures to distant
surfaces in several directions. When using Dallas 2, setting the
target point is made only once, there is no need to remove
unnecessary lines as with conventional methods.
1.3 Dallas 2 use
Lines marking the
point of measurement

To measure with Dallas2 device, place the laser
rangefinders on each arm of the clamp, secure the
rangefinders and make the measurement.
Product description1
1.4 Directions for use
5Dallas 2- user manual
4. Turn the rangefinders on in a mode of a continuous distance
measurement and, by moving the clamp over the surface, set the
desired point and mark its position.
1.Place the
rangefinders
in the clamp
slots.
2.Pull the
stabilizing
straps on the
rangefinder.
3. Press the
socket to the
rangefinders by
turning the
knobs
Dallas2 is designed for the use of two laser rangefinders regardless of
their size. After inserting and turning on the rangefinders in the
marker, the user, by moving the marker over the surface, directly sets
the X and Y values and the target point can be immediately marked
on the surface.
6Dallas 2- user manual
Select a
parameter on
the surface
Product description1
Set the point and
mark its position
by moving the
clamp over the
surface
Lines marking the
point of
measurement Rangefinder 1
Rangefinder 1
Distance measuring
beam laser 1
Distance measuring beam
laser 2
Rangefinder 2

8Dallas 2- user manual
Safety and environmental protection3
This section contains safety instructions that will help
protect you from personal injury or property damage.
Failure to follow these instructions voids the granted
warranty.
Operating the Dallas 2 device and all additional operations must be
performed strictly in accordance with the general principles of work
safety
•The tool complies with international safety standards.
•The tool should be used in accordance with the general principles of
occupational health and safety.
•Wear protective footwear and work clothes when using the Dallas 2
tool.
•Adjustment must be carried out in accordance with the instructions
and in a safe place
•The place of use must be free of any foreign objects within the fitter's
work area.
•Follow the correct order of work as described in the manual to avoid
undesirable events.
•Dropping the tool can result in injury if safety shoes and workwear are
not used.
•The Dallas 2 tool should only be used by one person.
•The tool does not need to be connected to the power supply.
•Work before and after the use of Dallas 2 should be carried out taking
into account the principles of health and safety and using personal
protective equipment (safety glasses, gloves, safety shoes, work
clothes)
•The use of chemicals related to the operation of the Dallas 2 tool
should be in accordance with the instructions of the manufacturers of
these agents and in compliance with health and safety rules.
3.1 General safety rules
Technical characteristics2
7
Dallas 2- user manual
2.1 General parameters of the tool
2.2 Assembling the tool after delivery
Screw the part of the tool body with the handle using the
attached screw. No tool is needed for screwing. Place the screw
in the target hole and tighten the handle by hand until you feel
resistance.
Net weight of the tool:
0,25kg
Dallas2
is a Y-shape device of the dimensions and parameters presented
in the picture.

•Be careful when tightening the clamps of the hand clamp.
•The device should be cleaned with the use of appropriate
tools and cleaning agents, as listed in the section on cleaning
and maintenance.
•Use only original spare parts or those recommended by the
manufacturer.
•Keep the package with the tool out of the reach of children.
•The tool may contain sharp edges and metal filings on the
surface.
•The tool should be stored and transported in accordance
with the manufacturer's recommendations.
•The tool was manufactured in industrial conditions with all
safety conditions.
Bezpieczeństwo i ochrona środowiska3
3.2 Storage
The Dallas 2 tool is delivered by the manufacturer in unit packages
or in a professional box, depending on the type of order.
It is recommended to store the tool in a separate, rigid unit package
to ensure the durability of the tool.
Transport, cleaning and maintenance4
4.1 Maintenance
After each use, the tool should be washed with water and dried
or wiped with a cloth. Scrape off deposits with a copper brush.
4.2 Storage
•If the tool is not in use for an extended period of time, it should
be stored in a safe and dry place.
•Keep the tool away from heavy, sharp objects.
•Place the tool in the appropriate place in a chest or a box.
•The tool must be kept out of the reach of children.
•Do not expose the tool to direct sunlight.
•Do not keep the tool in places where the temperature is above
35 degrees Celsius.
•Transport the tool in packaging protecting against physical
damage.
•Do not place heavy loads on the tool or package. This can
damage the entire tool or its components.
•Dropping the tool may disturb its functioning or result in
permanent damage.
4.3 Transportation
10Dallas 2- user manual9Dallas 2- user manual

12Dallas 2- user manual11Dallas 2- user manual
Utilization and scrapping5
All components of the tool
can be recycled.
The adopted construction solutions and high-quality
components allow for proper functioning of the device
for a period of about 10 years. Nevertheless, changes
that may occur much earlier and cannot be predicted
today such as changes in the customer’s needs, or changes in
regulations and standards forcing the equipment to be adapted
or withdrawn from use, may result in the necessity to dispose of
it and scrap it. This also applies to replaced or repaired parts or
assemblies of the device. The buyer is obliged to perform these
procedures in accordance with the legal status applicable at the
time and place.
5.1 Utilization and scrapping
The packaging of the tool is made of recyclable
materials. Packaging must be disposed of in
accordance with local environmental regulations,
so that all the materials can be recycled.
5.2 Product packaging