Inalsa Maxie Plus User manual

FOOD PROCESSOR
MAXIE PLUS
Instruction Manual

Dear Customer,
Congratulations! On the purchase of your INALSA Food Processor, this is
designed to include many superior features that permit you the fullest
expression of your Cooking skill and enthusiasm. You are now on the
threshold of a whole new world of Cooking pleasure.
At INALSA, we have a reputation of manufacturing innovative, high quality
appliances such as Food Processors, Mixer Grinders, Juicer Mixer Grinders,
Juice Extractors, Cooktops, Microwave ovens, Oven Toaster Grillers, Hand
Blenders, Electric Kettles, Rice Cookers, and Electric Chimneys. Your newly
acquired INALSA Food Processor bears the same distinctive hallmark of
excellence.
It is all the result of vigorous quality consciousness in INALSA's design and
development where uncompromising standards are maintained and rigid
quality control measures are exercised on raw materials, components and
finally, the finished product.
Your INALSA Food Processor has a lot of thoughtful features built in to
make your Cooking convenient. Please read these instructions carefully, so
that you may get the best out of the power packed features in your INALSA
Food Processor.
Welcome to the INALSA world of Cooking pleasure!

INDEX
Page No. Contents
1. Features
2. Technical specifications
3-6. Know your Inalsa food processor
7-8 Important Instuctions- Do's & Don'ts
9-15. How to assemble your Food Processor - Maxie Plus
16. Disc selection guide
17-19. Cleaning and maintenance
19. Safety device
20-28. Mouth watering recipes
29-30. Conversion table
31. Packing list
32. Warranty
33. Warranty card

Features*
·650 W powerful motor
·Shock proof plastic body
·6 blades & discs
·1.5 lt. blender jar with two stainless steel jars
·Centrifugal & Citrus juicer
·Overload protector
1
Maxie Plus

Technical Specifications *
Model type & No. Maxie Plus
Voltage 230V AC-50Hz.
Motor Universal
Power Consumption 650 watts
Rating (no load) 30 minutes continuous
Motor RPM at no load 18000 (approx)
Cord Plug 2-pin, 6A, 250V, PVC, 2M long (approx )
Speed control 3 speed rotary switch & one reverse action for
incher
Material of housing ABS
Material of liquidizing jar PC
Material of Dry grinding/Chutney jar Stainless steel
Capacity FP bowl- 1.0lt. Liquidizing jar: 1.5lt., Dry
grinding jar : 1 Lt. Chutney grinding jar :
400ml.
Attachments Centrifugal juicer, Citrus juicer, French fries
disc, Coconut shredding disc, Shredding cum
Slicing disc, Chopper blade, Kneader blade,
Egg whisker blade, Blender Jar, Dry Grinder
Jar, Chutney jar.
Overload protector Re-setting type
* Due to continuous improvements in product, specifications are subject to change
without prior notice.
2

3
1. Basic Unit
The basic unit houses the heavy
duty universal motor, and belt
driven shaft sleeve for food
processing.
2. The Bowl
The all purpose bowl is made of
transparent break resistant material
that makes it strong & durable, It
has a working capacity of 1.0 litre.
(0.75 litre for
liquids)
3. The Bowl Cover
The transparent bowl cover has an
interlock system to prevent
switching on the machine unless it
is, in its place and locked. The
feeder tube acts as an inlet for food
when using the discs or for
ingredi en ts r equired to b e
introduced during blending
operations.
4. The Food pusher.
This food pusher fits into the,
feeder tube and should be used to
push the food down in the feeder
tube. When slicing, shredding or
chipping, apply variable pressure to
suit the type of food being
processed. The food pusher also
acts as a liquid measure by virtue of
the markings given on its side.
Know your Inalsa Food Processor- Maxie Plus

5. Stainless Steel Blade
This stainless steel blade is used for
almost 80% of all food processing
functions. Commonly used for
chopping, mincing, pureeing,
pulping, wet grinding, mixing,
blending, processing etc. Please
keep the blades of this attachment
covered with plastic cover provided
to avoid any injury
6. The Plastic Blade
This plastic blade is useful for
kneading the dough, blending
mayonnaise and cake mixtures or to
combine sauces.
7. Slicing cum Shredding disc
(Reversible disc)
These disc have a slicing blade on
one side and cutting edges for
shredding on the other side. They
offer the facility of slicing and
shredding.
8. The Coconut shredding disc.
The shredding disc in ideally
suitable for fine shredding of
coconut. It can also be used for
mashing potatoes, shredding
cauliflower and raddish for
parantha fillings etc.
Note: While using the coconut
shredding disc no pressure should
be applied on the pusher. The
pusher should be gently kept in
feeder tube depending upon the
quality of ingredients. The pusher
should be removed a little before
the shredding is complete.
4

9.The Chipping disc
(French Fry Disc)
The chipping disc is specially
designed to made potato chips.
10. The Egg whisker disc
The whisker disc is specially
designed to whip cream, to churn
butter or for preparing batters
which require frothing consistency.
11. Stem
This is a detachable stem for all
discs. To fix, insert in the disc from
below & rotate anti clock-wise to
lock.
12. The Spatula
This specially designed spatula is
used to scrape and clean the sides of
the Bowl while the food is being
processed.
13. Wet grinding/Liquidizer Jar
This jar blends soups, juices,
shakes, purees evenly. All the wet
grinding operations like dosa, idli
and vada batters can be carried out
effectively.
5

14 Dry Grinding Jar
This dry grinding Jar is made of
stainless steel and has a plastic lid.
It smoothly grinds black pepper,
coffee beans, coriander, red chilies,
turmeric etc.
15 Chutney Jar
This chutney jar is made of stainless
steel and has a plastic lid. It is used
for making mint chutney, coconut
chutney etc.
16. Citrus Juicer
This citrus juicer is used for juicing
citrus fruits like sweet lime,
oranges, lemon etc.
17. Centrifugal Juicer
This juicer works on FP side, it
extracts juice from all hard fruits
and vegetables like apple, carrots
etc. and also from some citrus
fruits.
6

7
Important Instructions
Do's
1. Before connecting the appliance check the mains voltage complies with
the voltage specified.
2. Place your Food Processor at a convenient height so that you can operate it
easily. You should be able to look down into the attachments to check the
circulation of the ingredients.
3. Clear out some space around the machine and keep Food Processor away
from direct heat and sun.
4. Take care as the cutting edges of the disc blades are very sharp.
5. Ensure that the bowl assembly is perfectly locked with the basic unit.
6. For unlocking the bowl cover turn the bowl cover clockwise by pressing
the release switch on the upper base.
7. While using blending or dry grinding jars, fix the bowl and bowl cover as
the machine will not work till the bowl cover is in place.
8. While using centrifugal juicer place the juicer body with filter on to the
drive shaft and rotate the filter till it is locked with the body.
9. Always use a spatula during processing of the food.
10. Keep the food processor away from the reach of the children.
Don'ts
1. Do not apply undue pressure while using the coconut shredding disc.
2. Do not operate the centrifugal juicer unless juicer cover, filter is properly
clamped with the juicer body.
3. Do not leave the Food Processor in running condition unattended.
4. Do not touch the moving parts during operation as they revolve at
extremely high speeds and may cause injury.
5. Never allow the shredded, sliced or chipped food to touch the discs during
operation. It could force the disc upwards and cause damage. If bowl
begins to fill, empty it out in between.

8
6. Do not use fruits such as bananas & peaches which produce a thick paste
that can clog the juicer filter.
7. For extracting the juice from citrus fruits like orange, mousmi etc. it is
advisable not to use the food pusher so that seeds pop out automatically.
For best results, it is advised to cut the fruits into two halves and remove
seeds before extracting the juice.
8. Do not feed larger sized fruits into the feeder tube by force. This can
overload the motor and juicer filter may get unbalanced.
9. Never lay a thin plastic sheet or cloth under the basic unit. It may get
sucked up and block the ventilation holes in the base.
10. Do not allow the cord to hang over the edges of the table, or touch hot
surface.
11. Do not push food into the feeder tube by fingers while it is in operation.
If fruit become clogged in the feeder tube, use pusher to push it down. If it
doesn't work turn off the motor, unplug the unit, then disassemble the food
processor to remove remaining food.
12. Do not immerse the appliance in water.
13. Do not attempt to repair the food processor at home or allow any
unauthorized person to do it either, in the event of any service problem
please call your nearest service center.
Before First Use
1. After unpacking the unit and before any use, make sure the mechanical
parts of the unit and all its attachments are not damaged.
2. Wash the parts of the processor, especially those which will come into
contact with the Food.
3. Carefully go through the instruction manual before starting the operation.

The Bowl
With the switch side of food
processor facing you, hold the all
purpose bowl by the handle and
lower it onto the power drive shaft
of the motor base, ensuring that the
serrations given at the bottom of the
bowl coincides with the arrow
provides on the basic unit.
Turn anti-clockwise to lock the lugs
on the basic unit, ensure that lugs
are precisely fitted in the slots
provided on the bowl.
Discs
Take care as cutting edges of the
discs are very sharp. Hold the side
of the disc you want to use upwards,
insert the stem from below and
rotate it clockwise. This will lock
the stem with the disc.
The slicer side is used for slicing
vegetables, fruits, cooked or
partially frozen meats and firm
cheese or to coarsely shred
cabbage.
Shredding side replaces the
traditional “Kaddu-kas” in India
kitchen and is ideal for shredding
hard vegetables like potatoes,
carrots cucumbers and cheese etc.
The shredding side is also ideal for
julienne vegetables for chinese
dishes.
9
How To Assemble Your Inalsa Food Processor

Blades
Lower the blade with centre knob
onto the power drive shaft and
rotate till it rests down.
The stainless steel blade and plastic
blade settles low down inside.
While the disc remain just above
the rim of the bowl.
The Bowl Cover
Hold the bowl cover by the feeder
tube and place it on the bowl with
the feeder tube, pressing a little
towards left of the bowl's handle,
such that the serrations given on the
bowl cover coincide with the arrow
given at the top of the bowl.
Slide the bowl cover anti-clockwise
until it clicks to the rigid locked
position. For unlocking the bowl
cover, turn the bowl cover
clockwise by pressing the release
switch on the upper base. Insert the
food pusher into the feeding tube.
Note: Until the bowl cover is
locked into place, the unit will not
switch 'ON'
Connect the food processor to a
wall AC outlet. The machine can be
switched 'OFF' or 'ON' with the
help of rotary switch.
Now, the food processor is ready
for the action.
10

Whisker Disc
Hold the egg whisker disc with
embossed written matter on top
side and insert the holder into the
disc.
To lock the holder turn anti-
clockwise
Then fix the bowl over the basic
unit and insert the whisker,
assembly into drive shaft till it rests
down.
Add the processing material into
the Bowl. Fix the bowl cover of the
main Bowl and run the unit for
processing.
11

Liquidizer Jar & Dry Grinding
Jar
Fit the liquidizer Jar or dry grinding
Jar or chutney Jar on the left hand
side of basic unit, by opening the
top lid, Then align the locks with
the locking slots and twist anti-
clockwise so that the jar locks into
the position.
Put the ingredients inside the
Liquidizer Jar or Dry grinding Jar
or Chutney jar and shut the lid by
pressing downwards. Also fix the
food processor bowl & cover as the
machine will not work till the bowl
cover is in place.
Switch 'ON' the machine. Turn the
knob clockwise to the position 1,2
& 3 as per requirement.
Position 1 Low speed
Position 2 Medium
speed
Position 3 High speed
Fill the liquidizer jar upto 3/4 of its
capacity. (for additional froth like
lassi, Cold coffee, Mill shakes use
the incher position.)
12

Ingredients can be added during
operation, by removing the stopper
cap on the lid.
When the operation is complete,
switch 'OFF' the machine and
remove the liquidizer jar or dry
grinder jar by turning it clockwise.
Dry grinding
Once the dry grinding Jar fits on the
basic unit, put the ingredients
th
(maximum upto 3/4 ) & close the
lid. To start with use pulse & then
switch ON and move to higher
speed for fine grinding. Give break
of minimum 1 min. after 3 min.
running.
Chutney Grinding
Once the Chutney Jar is fit on the
basic unit, put in the inqredients and
close the lid. To start with, use
incher and then move to a higher
speed for fine chutney grinding.
13
LOCKING

Centrifugal juicer
Fix the FP bowl on to the base.
Place the juicer body with filter on
to the drive shaft & rotate the filter
till it is locked with the body.
Align the markings provided on the
juicer cover and the F.P. bowl,
lower the juicer cover on to the
bowl and rotate anticlockwise to
lock it in position.
Switch ON the unit & drop fruits in
the feeder tube.
14

Push down with a juicer pusher.
The juice will collect in the bowl
where-as the pulp accumulates in
the juicer body along with walls of
the filter. For best results prepare
small quantities at a time and clean
the filter frequently. For cleaning,
unlock and remove the filter, shake
in a bin and wash it under tap water.
Citrus Juice r
Fit the sleeve gear (1) onto drive
shaft till it rests.
Place the citrus filter body (2) on
the regular Food Processor bowl
a n d l o c k i t b y r o t a t i n g
anticlockwise.
Fit the impeller into filter body till it
rests.
Connect the F.P. to wall AC outlet.
Use the citrus juicer at minimum
speed.
15

16
Blending/Mixing Chipping Chopping Crumbing Crushing Wet grinding Dry grinding Chutney grinding Juicing (Hard Fruits & vegetables) Juicing (Citrus fruits) Julinning Kneading Mashing Mincing Pureeing Shredding/slicing thick Coconut shredding/deseeding Beating Whisking Churning Batter for cakes Whips Cuts Pulps Shells
Operations
Blades &
Discs
Stainless
steel blade
Plastic
blade
Thick
slicing/
shredding
disc
Coconut
shredding
disc
Chopping
disc
Whisker
disc
Blender
jar
Dry
grinding
jar
Citrus
juicer
Centrifugal
juicer
Disc selection guide
Chutney
jar

Take out the plug from the power
supply. Remove the food pusher
from the feeder tube. Then remove
the bowl cover (lid) by pressing the
white knob & rotating the lid
clockwise. Lift off the lid.
Disassemble the bowl by holding
the handle, turn clockwise and lift it
off the basic unit.
Wash bowl, lid, pusher in water and
dry it. To remove grease, use warm
soapy water and scrub gently with a
sponge.
Do not use boiling water or
metal/nylon brush.
Liquidizer Jar
Disassemble the jar by holding the
handle turn clockwise and lift it off
the basic unit.
17
Cleaning and Maintenance of Food Processor, Bowl, Bowl Cover, Pusher
Cleaning and Maintenance of Liquidizer Jar & Dry Grinding Jar