Bullet Express TRIO User manual

USER MANUAL
©Bullet Express, LLC. All Rights Reserved.

IMPORTANT SAFEGUARDS AND
CAUTIONARY INFORMATION
FOR YOUR SAFETY, CAREFULLY
READ ALL INSTRUCTIONS
BEFORE OPERATING BULLET EXPRESS TRIO
When using electrical appliances, basic safety precautions should always be followed
including the following:
• This appliance is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge,
unless they have been given supervision or instruction concerning use of the
appliance by a person responsible for their safety.
• Children should be supervised to ensure that they do not play with the appliance.
• If the supply cord is damaged, it must be replaced by the manufacturer, its service
agent or similarly qualified persons in order to avoid a hazard.
• Care is needed when handling cutting blades, especially when removing from the
bowl and during cleaning.
• Caution! To avoid risk of electrical shock, never immerse the cord, plug or Motor
Base in water or other liquids.
• Do not use attachments that are not recommended or sold by the manufacturer as
doing so may cause damage, fire, electric shock or injury and will void the warranty.
• Do not pull, twist or mistreat the power cord.
• Do not allow the power cord to hang over the side of the counter or table.
• Do not allow the power cord to touch hot surfaces, including stove.
• Unplug the Bullet Express Trio when it is not in use, before putting on or taking off
parts and before cleaning or assembling. When not in use, do not store blades or
discs on the motor shaft.
• Make sure that the Safety Clamps securely lock the cover in place and that the Feed
Tube Pusher is properly inserted, before operating the Bullet Express Trio.
• Do not attempt to defeat or override the cover interlock Safety Clamp mechanism.
• Avoid contact with cutting blades, discs, and moving parts of the Bullet Express
Trio. Never push food down into the feed tubes by hand. Always use the proper
Feed Tube Pusher or injury can occur.
• Keep hands and utensils out of feed tubes and away from the cutting blades while
Bullet Express Trio is running to reduce risk of sever injury to person or damage
to the Bullet Express Trio. To use a scraper, turn the Bullet Express Trio off and
unlock the safety clamps.
• To avoid injury from moving parts or food debris when operating Bullet Express
Trio, keep face and fingers out of and away from the Meal Maker discharge outlet.
• Make sure the motor has completely stopped before removing covers.
• Always put ingredients in the Meal Mixer Bowl first, before operation. Never turn
on when bowl is empty.
• Always make sure Juicer Cover is clamped securely in place and Juicer Spout is
securely inserted on to the Juicer Bowl before operating the juicer. Do not unfasten
clamps while the juicer is in operation. Turn off juicer prior to removing Juice Pulp
Container for emptying.
• To avoid clogs in the Juicer Feed Tube, foods should be cut to sizes no larger than
2 inches in diameter. If food does become lodged in the feed tube, use Feed Tube
Pusher only to push the lodged particles down. If this does not unclog the tube,
turn off the Bullet Express Trio and disassemble the juicer to remove the remaining
lodged food.
• Do not use Bullet Express Trio if the rotating Juicer Filter is damaged.
• Always use your Bullet Express Trio on a clean, flat, hard, dry surface.
• Do not use the Bullet Express Trio outdoors in the rain or in wet conditions.
• Never leave the Bullet Express Trio unattended while it is in use.
• Close supervision is necessary when any appliance is used by or near children.
• Blades and discs are sharp. Handle carefully.
• Flashing red light indicates Bullet Express Trio is ready to operate. Avoid any
contact with blades or moveable parts.
• Do not place any of the Bullet Express Trio containers or bowls in a microwave.
• Never keep the blades running for more than three (3) minutes at a time, as it
can cause permanent damage to the motor. If the motor stops working, unplug
the Motor Base and let it cool for up to 1 hour before attempting to use it again.
Your Bullet Express Trio has an internal thermal breaker that shuts off the unit
when it overheats. Letting the thermal breaker cool down will allow the
Motor Base to reset.
SAVE THESE INSTRUCTIONS
FOR HOUSEHOLD USE ONLY

FEATURES OF THE BULLET EXPRESS TRIO
• Multi-purpose food processing functions of juicing, mixing, chopping, blending,
slicing, shredding and mincing.
• Two-way safety system: Your Bullet Express Trio will not operate unless the
Safety Clamps are engaged and the work bowls and covers are properly locked on
the Motor Base.
• A powerful 700W motor that will chop, blend, shred, slice and mix in a
matter of seconds.
• A detachable system for multi-functions and easy cleaning.
• The extra-wide feed tubes are perfect for juicing and slicing whole fruits
and vegetables.
• State-of-the-Art operating and safety design.
TABLE OF CONTENTS
What You Get . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 - 2
Motor Base .............................................1
Meal Maker Express Assembly Components . . . . . . . . . . . . . . . . . . . . 1
Meal Mixer Express Assembly Components . . . . . . . . . . . . . . . . . . . . 2
Juicer Express Assembly Components . . . . . . . . . . . . . . . . . . . . . . . . 2
Assembling the Bullet Express Trio ..........................3 - 6
Meal Maker Express Assembly Instructions. . . . . . . . . . . . . . . . . . . . . 3
How to Use the Slicer and Shredder Disc . . . . . . . . . . . . . . . . . . . . . . 4
Meal Mixer Express Assembly Instructions . . . . . . . . . . . . . . . . . . . . . 5
Juicer Express Assembly Instructions . . . . . . . . . . . . . . . . . . . . . . . . . 6
Operating the Bullet Express Trio Control Panel ..................7
Using the Pulse Technique ...................................8
Bullet Express Trio Capacities .................................8
How to Maintain Your Bullet Express Trio ........................9
Bullet Express Trio Electrical Specifications ....................10
Meal Maker
Attachment
Meal Mixer
Attachment
Juicer
Attachment

WHAT YOU GET
1 Your Bullet Express Trio has three main component assemblies that perform the
multiple functions of the machine. The assemblies are the Meal Maker, Meal
Mixer and Juicer. The Motor Base (see below) is the common mechanism that
powers the other components. The Safety Clamps on the Motor Base hold the
other components safely in place during operation. Note: The unit will not operate
unless the Safety Clamps are properly engaged and securely locked on to a work
bowl cover.
MOTOR BASE:
Motor Base
(Common to All Assemblies)
2 The Meal Maker Express Assembly is used for slicing and shredding a variety of
vegetables, fruits, cheeses, etc. (see components below):
MEAL MAKER EXPRESS ASSEMBLY Components:
1
Slicer/Shredder
Food Pusher
Slicer/Shredder Disc
(Slicer Blade UP
for SLICING)
Slicer/Shredder Disc
(Slicer Blade DOWN
for SHREDDING)
Slicer/Shredder Disc
Outlet Disc
Meal Maker Express
Complete
(Bowl Not Included)
Slicer/Shredder
Cover
Slicer/Shredder
Bowl
Slicer/Shredder
Gear Body

WHAT YOU GET
3 The Meal Mixer Express Assembly is used for a variety of functions including ice
crushing, mixing, blending, chopping, mincing, etc. (see components below):
MEAL MIXER EXPRESS ASSEMBLY Components:
4 The Juicer Express Assembly can be used for juicing all types of fruits and
vegetables (see components below):
JUICER EXPRESS ASSEMBLY Components:
Feeder Hole Plug
Chopper/Mixer Blade
(Split-Level)
Meal Mixer Cover
Flat Blade
Meal Mixer Bowl
Blade Remover Meal Mixer Express
Assembly Complete
Juicer Feed
Tube Pusher
Juicer bowl w/deTach-
able sPouT
Juicer cover
Juicer cleaning brush
Juicer FilTer
Juicer express Assembly complete
Juicer PulP
conTainer
ASSEMBLING THE BULLET EXPRESS TRIO
MEAL MAKER EXPRESS
ASSEMBLY INSTRUCTIONS
NOTE: To disassemble, just reverse the procedure above.
A. Put the Slicer/Shred-
der Gear Body on the
Motor Body and then
place the Slicer/Shred-
der Bowl on the Slicer/
Shredder Gear Body
shaft.
D. Place your own bowl
or container under the
Slicer/Shredder Cover
outlet.
E. Push the “Low” ON
button first and then put
in your vegetables/fruits
using the Small Food
Pusher.
B. Put the Outlet Disc on the
Slicer/Shredder shaft and
then place the Slicer/Shred-
der disc on the shaft in the
desired direction (Slicer
Blade UP for Slicing, DOWN
for Shredding). Use caution
when handling sharp discs.
C. Place the Slicer/
Shredder Cover
over the Bowl and
attach the Safety
Clamps.
23

45
MEAL MIXER EXPRESS
ASSEMBLY INSTRUCTIONS
NOTE: To disassemble, just reverse the procedure above.
A. Insert desired blade onto the spindle
axle of the Meal Mixer Bowl. Use
caution while handling sharp blades.
NOTE: Always put ingredients in first
before using Mixer Attachments.
Never turn on when bowl is empty.
D. Push the HI, LOW or PULSE button (as
per your Recipe Manual) to operate.
E. HOW TO USE THE BLADE REMOVER:
CAUTION: When a blade cannot be removed by grasping the shaft with your
fingers, please use the Blade Remover as shown. BLADES ARE VERY SHARP USE
CAUTION WHEN REMOVING THE BLADE. Insert the shorter bent lifting edge under the
center part of the blade and press the handle back away from the blade to release the
blade from the shaft.
B. Put ingredients into the Meal
Mixer Bowl and place the Cover and
Feeder Hole Plug on the Bowl.
C. Put the Meal Mixer Bowl on the Motor
Base and place the Motor Base Safety
Clamps over the side clamps of the Bowl
Cover. Lock the Safety Clamps with both
hands until you hear a click.
HOW TO USE THE SLICER/SHREDDER DISC
Use the Slicer/Shredder Disc in the manner required for the desired results.
Slicing
For SLICING, the Slicer Blade should be UP.
Blade Direction (UP)
Blade Direction (DOWN)
Slicing Results Button
Button
Shredding Results
Shredding
For SHREDDING, the Slicer Blade should be DOWN (see below).
Pulse
Off
High
Low
Pulse
Off
High
Low

JUICER EXPRESS
ASSEMBLY INSTRUCTIONS
NOTE: To disassemble, just reverse the procedure above.
67
A. Put Juicer Bowl on Motor Body.
Insert Juicing Filter firmly into Bowl.
Be sure the Juicer Spout is firmly
inserted into the bowl.
B. Put Juicer Cover on Juicer Bowl
and lock Safety Clamps firmly with
both hands until you hear a click.
C. Put Pulp Container securely under
Juicer Cover outlet.
D. Push the “LOW” ON
button first and then
put in your vegeta-
bles/fruits using the
Feed Tube Pusher.
OPERATING THE BULLET EXPRESS TRIO
CONTROL PANEL
1 JUICING FUNCTION
• Use Juicer Express Assembly
• Operate on LOW
• Make natural vegetable and fruit juices
• Make purées for soups, sauces, tofu, etc
2 SLICING FUNCTION
• Use Meal Maker Express Assembly
• Use Slicer Disc
• Operate on LOW
• Slice all types of vegetables
3 SHREDDING FUNCTION
• Use Meal Maker Express Assembly
• Use Shredder Disc
• Operate on LOW
• Shred vegetables, cheese, etc.
4 SHAVED ICE FUNCTION
• Use Meal Maker Express Assembly
• Use Slicer Disc
• Operate on HIGH
• Shave Ice
5 CHOPPING FUNCTION
• Use Meal Mixer Express Assembly
• Use Chopper/Mixer (Split Level) Blade
• Operate with PULSE button
• Chop Garlic, Onions, Peppers, Meat, Fish,
etc.
6 MIXING FUNCTION
• Use Meal Mixer Express Assembly
• Use Chopper/Mixer (Split Level) Blade
• Operate on HIGH or LOW
• Mix smoothies, cake batters, etc.
7 CRUSHING FUNCTION
• Use Meal Mixer Express Assembly
• Use Flat Blade
• Operate on HIGH
• Finely crush dried beans, peas, etc.
8 DOUGH MIXING FUNCTION
• Use Meal Mixer Express Assembly
• Use Flat Blade
• Operate on HIGH or LOW
(As pertains to recipe book)
• Mixing Dough
Pulse
Off
High Low

89
HOW TO MAINTAIN YOUR
BULLET EXPRESS TRIO
A. Wash with warm water and neutral
detergent and wipe with a dish towel. Do
not use an abrasive scrubber. Clean the
Juicer Filter and Removable Spout with
the Cleaning Brush supplied. CAUTION: Be
careful when you clean blades and discs
which are sharp and can cut.
CAUTION: Do not immerse the
Motor Body or Slicer/Shredder Gear Body in water. Water in
the motor can cause malfunctions or electrical shock.
Periodically check plug and cord for damage.
C. Clean Motor Base and Meal Maker Gear
Body with a damp cloth and mild detergent.
D. When washing your Bullet Express
Trio do not use any chemical cleaners
as they may discolor or ruin the ap-
pearance of your machine.
USING THE PULSE TECHNIQUE
PULSE TECHNIQUE
The Bullet Express Trio motor is so
powerful, if you aren’t careful you can
quickly over-process food and turn it
into mush. This is where the Pulse
Technique is key.
To Pulse, simply press the Pulse
button and immediately release.
Let the motor completely stop and
Pulse again until desired results
have been achieved.
B. Remove the detachable Juicer Spout for
easy cleaning.
Pulse
Off
High Low
BULLET EXPRESS TRIO CAPACITIES
Recommended capacities for various foods and functions
Task
Mincing
Chopping
Grinding
Grinding
Chopping
Crushing
Dough
Mixing
Slicing/
Shredding
Raw Beef
Onions
Coffee
Beans
Dry
Soybeans
Apples
Ice
Flour &
Water
Carrots
Chopper/
Mixer
Chopper/
Mixer
Flat Blade
Flat Blade
Chopper/
Mixer
Flat Blade
Flat Blade
Slicer/
Shredder
Mixing
Bowl
Mixing
Bowl
Mixing
Bowl
Mixing
Bowl
Mixing
Bowl
Mixing
Bowl
Mixing
Bowl
Slicer/Shred-
der Bowl
15 Seconds
15 Seconds
15 Seconds
15 Seconds
15 Seconds
15 Seconds
15 Seconds
3 Minutes
Cut maximum of 400g into 2.5cm cubes.
Chop maximum of 500g to ensure evenly sized
pieces.
Chop maximum of 300g to ensure evenly sized
pieces.
Chop maximum of 300g to ensure evenly sized
pieces.
Cut maximum 500g into 2.5cm cubes before
chopping.
Crush up to 500g of ice cubes using the pulse
button.
Mix up to 400mls of water into a maximum of
340g of flour to make dough.
Slice/Shred up to a maximum of 2.5kgs.
Food/
Ingredient Blade Bowl Type
Maximum
Time Directions

10 11
NOTES
BULLET EXPRESS TRIO ELECTRICAL SPECIFICATIONS
MODEL NUMBER :
VOLTAGE/HERZ:
RATING:
MEAL MIXER BOWL CAPACITY:
MAXIMUM CONTINUOUS USE:
MODEL: Bullet Express Trio
BE-110
AC220V~240V 50Hz/60Hz
700 WATTS Max
1.18 Litres
3 Minutes

12 13
NOTES
NOTES

NOTES
14