Inatech UC4001 User manual

w w w . i n a t e c k . com
UC4001
4 Port USB Wall Charger

- 2 -
UC4001 USB Wall Charger
Instruction Manual
Easy access to an Outlet Slot offer Lots Charging Ports Eliminate the need for Multipie
Smart USB Charging Port Controller inside offer Super Charging Port Charging Any
Devices.
External Battery Pack.
Packing list:
UC4001 USB Wall Charger x1
Instruction manual x1
I. UC4001 Introduction
Achieved with Smart USB Charging Port Controller and Compliant with USB Battery Charging
Specification 1.2 (BC 1.2), INATECK UC4001 Smart USB Travel Wall Charger is an ideal
Solution Charge Various Devices while access to one Port of Outlet or Power Strip. Eliminate
the need for Multiple Chargers and Outlets. Surge Protector inside Sustain Reliable Power.
Super Charging Port based on Smart USB Charging Port Controller will Detect Attached
Devices and Self-Adjusted to Right Status, Avoid any Compatibility Issue and Supply Reliable
Power for any High Power Required iPad, Tablets or Phones. Regular Samsung Charger will
not Charge Apple Devices while Apple Charger will not Charge Samsung Devices, However
that will never happen to Smart Super Charging Port of INATECK Charger. Smart Super
Charging Port will charge any Samsung, Apple Tablets or Phones at Max Power.
Universal Charging Port Charge Phones, GPS, MP3 or MP4, Bluetooth Headset and
Chargers and Outlets.
Surge Protector inside Sustain Reliable Power, Charge All Devices at the Same Time.

- 3 -
Scheme image
II. Technical data
Product name 4 Port USB Wall Charger
Product type Inateck UC4001
Colour White
Product material High Strength ABS Engineering Plastic
Interface USB
Licences CE, FCC
Measurements 90mm length x 80mm width x 35mm height
Input AC 100-240V 50/60Hz
Compatible Devices iPhone , Cell Phone , Tablet , iPad , iPod , GPS , Camera External
Battery Pack , Bluetooth Headset and any USB Devices require 5V
USB Power
III. Product Instruction
a. Attach INATECK UC4001 Charger to Outlet, Power Strip or Surge Protector

- 4 -
b. Attach USB Devices to INATECK UC4001 Charger for Powering or Charging
c. Remove Devices and remove INATECK UC4001 Charger from Outlet when
the Charging or Powering is finished.

- 5 -