Indumicro IMP-M Series User manual

IMP-MXXX(P)T
Series
Display module
User’s Manual

VIO-100 / VIO-200 l User’s Manual
2
Table of Contents
Prefaces …………………………………………………….……………………………………………. 0ϯ
Revision …………………………………………………………………………………………..……………….……….. 03
Disclaimer ………………………………………………………..…….…….………………………….………………..03
Copyright Notice …………………………………….…………………….…………………………………………… 03
Trademarks Acknowledgment …………..………………………………………………………...................03
Environmental Protection Announcement …………………………….………………….……………….. 03
Safety Precautions ………………………………………….……………………………….…………….…………..04
Technical Support and Assistance …………………………………….…………….…………….…………….05
Conventions Used in this Manual ………………………………………………………………….….………..05
Package Contents …………………………………………………………………………………………….…………06
Ordering Information …………………………………….……………………………………….……….………… 07
Chapter 1 Product Introductions ………………………………………………………..… 0ϴ
1.1 Overview ……………………….………………………………..………….…………..…………….. 09
1.1.1 IMP-M120(P)T ………….…………………….…………...……….…..……………....... 10
1.1.2 IMP-M150(P)T ………….………………………….…..….……….…..……………....... 11
1.1.3 IMP-M160(P)T ………….………………………………...……….…..……….……....... 12
1.1.4 IMP-M170(P)T ………….……………………….…..…….……….…..……………....... 13
1.1.5 IMP-M190(P)T ………….…………………….…..……….……….…..……………....... 14
1.1.6 IMP-M220(P)T ………….……………………………..….……….…..….…………....... 15
1.2 Mechanical Dimension …………………………..……………………..…..………….………. 16
1.2.1 IMP-M120(P)T ………….…………………….…..……………............................... 16
1.2.2 IMP-M150(P)T………….……………….…...…..……………................................ 16
1.2.3 IMP-M160(P)T ………………………………..…….……………….…..……………....... 17
1.2.4 IMP-M170(P)T ………….…………………….…..……………............................... 17
1.2.5 IMP-M190(P)T ………….……..……………….…..……………............................. 18
1.2.6 IMP-M220(P)T ………….……..…………………..……….……….…..……………....... 18
Chapter 2 Front Panel Controls ……………………………………………………………. ϭϵ
2.1 Users Controls ………………………………………….…..…………………..…...…………….... 20
2.1.1 Power Button ………………………….…………….………………………….……………20
2.1.2 LED ………………………………………………………….…..…………..…………..………..20
2.1.3 MENU / Enter Button ……………….…………….………………..………………..…. 20
2.1.4 Increase Button …………………………..………….…………………..……………..….20
2.1.5 Decrease Button ……………….…………………….……………………..……..…..…. 20
2.1.6 AUTO / Exit Button ………………………………………….………………..……....…. 20
2.2 OSD Operation ………………………………….…….……….…….….….….........................21
2.2.1 Luminance ……………………………………………………….……….………………..….21
2.2.2 Picture ……………………………………………………………….……..………………..….22
2.2.3 Color …………………………………………………………………………..……………..…. 22
2.2.4 OSD Settings …………………………………………………….………………………..…. 22
2.2.5 Setup ……………………………………………………………………..…………………..….23
Chapter 3 System Setup …………………………..……………………………………………2ϰ
3.1 Set torque force to 3.5 kgf-cm to execute all the screwing and
unscrewing. ……….………………………………………………………………………………….... 25
3.2 Removing PC or monitor module from the display module ………………..…... 25
3.3 Connecting PC module with VIO display module ……………….……..……………... 26

3
Preface
VIO-100 / VIO-200 l User’s Manual
Prefaces
Revision
Revision
Description
Date
1.0
Manual Released
2016/10/06
Disclaimer
All specifications and information in this User’s Manual are believed to be accurate and up to date.
Indumicro.com does not guarantee that the contents herein are complete, true, accurate or non-
misleading. The information in this document is subject to change without notice and does not represent a
commitment on the part of Indumicro.com
Indumicro.com disclaims all warranties, express or implied, including, without limitation, those of
merchantability, fitness for a particular purpose with respect to contents of this User’s Manual. Users must
take full responsibility for the application of the product.
Copyright Notice
All rights reserved. No part of this manual may be reproduced or transmitted in any form or by any means,
electronic or mechanical, including photocopying, recording, or information storage and retrieval systems,
without the prior written permission of Indumicro.com Copyright © Indumicro.com
Trademarks Acknowledgment
Intel®, Celeron® and Pentium® are trademarks of Intel Corporation.
Windows® is registered trademark of Microsoft Corporation.
AMI is trademark of American Megatrend Inc.
IBM, XT, AT, PS/2 and Personal System/2 are trademarks of International Business Machines Corporation
All other products and trademarks mentioned in this manual are trademarks of their respective owners.
Environmental Protection Announcement
Do not dispose this electronic device into the trash while discarding. Please recycle to minimize pollution
and ensure environment protection.

4
Preface
VIO-100 / VIO-200 l User’s Manual
Safety Precautions
Before installing and using the equipment, please read the following precautions:
Put this equipment on a reliable surface during installation. Dropping it or letting it fall could
cause damage.
The power outlet shall be installed near the equipment and shall be easily accessible.
Turn off the system power and disconnect the power cord from its source before making any
installation. Be sure both the system and the external devices are turned OFF. Sudden surge
of power could ruin sensitive components. Make sure the equipment is properly grounded.
When the power is connected, never open the equipment. The equipment should be opened
only by qualified service personnel.
Make sure the voltage of the power source is correct before connecting the equipment to the
power outlet.
Disconnect this equipment from the power before cleaning. Use a damp cloth. Do not use
liquid or spray detergents for cleaning.
Avoid the dusty, humidity and temperature extremes.
Do not place heavy objects on the equipment.
If the equipment is not used for long time, disconnect it from the power to avoid being
damaged by transient over-voltage.
The storage temperature shall be above - 20 ° C and below 70 ° C.
The computer is provided with a battery-powered real-time clock circuit. There is a danger of
explosion if incorrectly replaced. Replace only with the same or equivalent type
recommended by the manufacturer.
If one of the following situation arises, get the equipment checked be service personnel:
•The power cord or plug is damaged.
•Liquid has penetrated into the equipment.
•The equipment has been exposed to moisture.
•The equipment does not work well or it cannot work according the user’s manual.
•The equipment has been dropped and damaged.
•The equipment has obvious signs of breakage.

5
Preface
VIO-100 / VIO-200 l User’s Manual
CAUTION
NOTE
WARNING
Technical Support and
Assistan ce
1. Visit the C&T Solution Inc website at www.indumicro.com where you can find the latest
information about the product.
2. Contact your distributor, our technical support team or sales representative for technical support if
you need additional assistance. Please have following information ready before you call:
Model name and serial number
Description of your peripheral attachments
Description of your software (operating system, version, application software, etc.)
A complete description of the problem
The exact wording of any error messages
Conventions Used in this
Manual
This indication alerts operators to an operation that, if not strictly observed,
may result in severe injury.
This indication alerts operators to an operation that, if not strictly observed,
may result in safety hazards to personnel or damage to equipment.
This indication provides additional information to complete a task easily.

6
Preface
VIO-100 / VIO-200 l User’s Manual
Package Contents
Before installation, please ensure all the items listed in the following table are included in the package.
Item Description Q'ty Item Description
1 IMP-M120 Series Display Module 1 1 IMP-M150 Series Display Module
2 Panel Mount Kit 10 2 Panel Mount Kit
Item Description Q'ty Item Description
1 IMP-M160 Series Display Module 1 1 IMP-M170 Series Display Module
2 Panel Mount Kit 8 2 Panel Mount Kit
Item Description Q'ty Item Description
1 IMP-M190 Series Display Module 1 1 IMP-M220 Series Display Module
2 Panel Mount Kit 14 2 Panel Mount Kit
IMP-M120(P)T
IMP-M150(P)T
IMP-M160(P)T
IMP-M170(P)T
IMP-M190(P)T
IMP-M220(P)T
Q'ty
1
10
Q'ty
1
10
Q'ty
1
12

7
Preface
VIO-100 / VIO-200 l User’s Manual
Ordering Information
Model No. Product Description
IMP-M120T 12.1" XGA Resistive Touch Thin Frame Display Module with 2x 5W Speaker
IMP-M120PT 12.1" XGA Capacitive Touch Thin Frame Display Module with 2x 5W Speaker
IMP-M150T 15" XGA Resistive Touch Thin Frame Display Module with 2x 10W Speaker
IMP-M150PT 15" XGA Capacitive Touch Thin Frame Display Module with 2x 10W Speaker
IMP-M160T 15.6" 16:9 FHD Resistive Touch Thin Frame Display Module with 2x 10W Speaker
IMP-M160PT 15.6" 16:9 FHD Capacitive Touch Thin Frame Display Module with 2x 10W Speaker
IMP-M170T 17" SXGA Resistive Touch Thin Frame Display Module with 2x 10W Speaker
IMP-M170PT 17" SXGA Capacitive Touch Thin Frame Display Module with 2x 10W Speaker
IMP-M190T 19" SXGA Resistive Touch Thin Frame Display Module with 2x 10W Speaker
IMP-M190PT 19" SXGA Capacitive Touch Thin Frame Display Module with 2x 10W Speaker
IMP-M220T 21.5" 16:9 FHD Resistive Touch Thin Frame Display Module with 2x 10W Speaker
IMP-M220PT 21.5 " 16:9 FHD Capacitive Touch Thin Frame Display Module with 2x 10W Speaker

Chapter 1
Product Introductions

VIO-100 / VIO-200 l User’s Manual
Chapter 1: Product Introductions

1.1 Overview
The IMP-MXXX(P)T series display module features with resistive 5-wire or projected capacitive touch
screen, flat surface, IP 65 dust/waterproof front panel, and aluminum die-casting front frame with
rugged body structure, it is rugged and reliable for industrial environment. By supporting Multi-
Mode Display Module (MDM) technology, enabling IMP-MXXX(P)T series monitor module to
configure, upgrade and maintain easily.

VIO-100 / VIO-200 l User’s Manual
Chapter 1: Product Introductions
1
1.1.1 IMP-M120(P)T
Key Features
12.1” TFT XGA 4:3 LCD with Resistive 5-wire / Projected Capacitive Touch
- 10 ° C to 60 ° C extended operating temperature
Designed with Aluminum Die-Casting Front Frame
IP65 Compliant Front Panel
Two 5W Internal Speakers Built-in
Multi-language OSD built-in
IMP-M120(P)T
Hardware Specification
Display
• LCD Size: 12.1” (4:3)
• Max. Resolution: 1024 x 768 (XGA)
• Brightness (cd/m2): 500
• Contrast Ratio: 700 : 1
• LCD Color: 16.2M
• Pixel Pitch (mm): 0.24 (H) x 0.24 (V)
• Viewing Angle (H-V): 160 / 160
• Backlight MTBF: 50000 hrs (LED Backlight)
I/O
• Internal Speaker: AMP 5W + 5W
• OSD Key: LCD On/Off, Auto, Menu, Up and Down
Touch
• Resistive 5-wire: IMP-M120T Only
• Projected Capacitive: IMP-M120PT Only
Environment
• Operating Temp.: -10 ° C to 60 ° C
• Storage Temp.: - 20 ° C to 70 ° C
• Relative Humidity: 10% to 95% (non-condensing)
• IP Level: IP 65 Compliant Front Panel
Physical
• Front Panel Construction.: Die-cast Flat Surface
• IMP-M120(P)T
- Dimension: 329 (W) x 257 (D) x 47.7 (H)mm
- Weight: TBC
• Mounting: VESA Mounting Holes
75 x 75mm, 100 x 100mm

1
VIO-100 / VIO-200 l User’s Manual
Chapter 1: Product Introductions
1.1.2 IMP-M150(P)T
Key Features
15”TFT XGA 4:3 LCD with Resistive 5-wire / Projected Capacitive Touch
-10 ° C to 60 ° C extended operating temperature
Designed with Aluminum Die-Casting Front Frame
IP65 Compliant Front Panel
Two 10W Internal Speakers Built-in
Multi-language OSD built-in
IMP-M150(P)T
Hardware Specification
Display
• LCD Size: 15”(4:3)
• Max. Resolution: 1024 x 768 (XGA)
• Brightness (cd/m2): 350
• Contrast Ratio: 700 : 1
• LCD Color: 16.2M
• Pixel Pitch (mm): 0.297 (H) x 0.297 (V)
• Viewing Angle (H-V): 170 / 160
• Backlight MTBF: 50000 hrs (LED Backlight)
I/O
• Internal Speaker: AMP 10W + 10W
• OSD Key: LCD On/Off, Auto, Menu, Up and Down
Touch
• Resistive 5-wire: IMP-M150T Only
• Projected Capacitive: IMP-M150PT Only
Environment
• Operating Temp.: -10 ° C to 60 ° C
• Storage Temp.: - 20 ° C to 65 ° C
• Relative Humidity: 10% to 95% (non-condensing)
• IP Level: IP 65 Compliant Front Panel
Physical
• Front Panel Construction.: Die-cast Flat Surface
• IMP-M150(P)T
- Dimension: : 377 (W) x 301 (D) x 44.7 (H)mm
- Weight: TBC
• Mounting: VESA Mounting Holes
75 x 75mm, 100 x 100mm

1
VIO-100 / VIO-200 l User’s Manual
Chapter 1: Product Introductions
1.1.3 IMP-M160(P)T
Key Features
15.6” TFT Full HD 16:9 LCD with Resistive 5-wire / Projected Capacitive Touch
-10 ° C to 70 ° C extended operating temperature
Designed with Aluminum Die-Casting Front Frame
IP65 Compliant Front Panel
Two 10W Internal Speakers Built-in
Multi-language OSD built-in
IMP-M160(P)T
Hardware Specification
Display
• LCD Size: 15.6” (16:9)
• Max. Resolution: 1920 x 1080 (Full HD)
• Brightness (cd/m2): 400
• Contrast Ratio: 700 : 1
• LCD Color: 16.7M
• Pixel Pitch (mm): 0.17925 (H) x 0.17925 (V)
• Viewing Angle (H-V): 160 / 140
• Backlight MTBF: 50000 hrs (LED Backlight)
I/O
• Internal Speaker: AMP 10W + 10W
• OSD Key: LCD On/Off, Auto, Menu, Up and Down
Touch
• Resistive 5-wire: IMP-M160T Only
• Projected Capacitive: IMP-M160PT Only
Environment
• Operating Temp.: - 10 ° C to 70 ° C
• Storage Temp.: - 20 ° C to 70 ° C
• Relative Humidity: 10% to 95% (non-condensing)
• IP Level: IP 65 Compliant Front Panel
Physical
• Front Panel Construction.: Die-cast Flat Surface
• IMP-M160(P)T
- Dimension: : 398 (W) x 247 (D) x 50.7 (H)mm
- Weight: TBC
• Mounting: VESA Mounting Holes
75 x 75mm, 100 x 100mm

1
VIO-100 / VIO-200 l User’s Manual
Chapter 1: Product Introductions
1.1.4 IMP-M170(P)T
Key Features
17”TFT XGA 4:3 LCD with Resistive 5-wire / Projected Capacitive Touch
-10 ° C to 60 ° C extended operating temperature
Designed with Aluminum Die-Casting Front Frame
IP65 Compliant Front Panel
Two 10W Internal Speakers Built-in
Multi-language OSD built-in
IMP-M170(P)T
Hardware Specification
Display
• LCD Size: 17”(4:3)
• Max. Resolution: 1280 x 1024 (SXGA)
• Brightness (cd/m2): 350
• Contrast Ratio: 800 : 1
• LCD Color: 16.7M
• Pixel Pitch (mm): 0.264 (H) x 0.264 (V)
• Viewing Angle (H-V): 170 / 160
• Backlight MTBF: 50000 hrs (LED Backlight)
I/O
• Internal Speaker: AMP 10W + 10W
• OSD Key: LCD On/Off, Auto, Menu, Up and Down
Touch
• Resistive 5-wire: IMP-M170T Only
• Projected Capacitive: IMP-M170PT Only
Environment
• Operating Temp.: - 10 ° C to 60 ° C
• Storage Temp.: - 20 ° C to 70 ° C
• Relative Humidity: 10% to 95% (non-condensing)
• IP Level: IP 65 Compliant Front Panel
Physical
• Front Panel Construction.: Die-cast Flat Surface
• IMP-M170(P)T
- Dimension: : 407.5 (W) x 339 (D) x 50.5 (H)mm
- Weight: TBC
• Mounting: VESA Mounting Holes
75 x 75mm, 100 x 100mm

1
VIO-100 / VIO-200 l User’s Manual
Chapter 1: Product Introductions
1.1.5 IMP-M190(P)T
Key Features
19”TFT XGA 4:3 LCD with Resistive 5-wire / Projected Capacitive Touch
-10 ° C to 50 ° C extended operating temperature
Designed with Aluminum Die-Casting Front Frame
IP65 Compliant Front Panel
Two 10W Internal Speakers Built-in
Multi-language OSD built-in
IMP-M190(P)T
Hardware Specification
Display
• LCD Size: 19”(4:3)
• Max. Resolution: 1280 x 1024 (SXGA)
• Brightness (cd/m2): 350
• Contrast Ratio: 1000 : 1
• LCD Color: 16.7M
• Pixel Pitch (mm): 0.294 (H) x 0.294 (V)
• Viewing Angle (H-V): 170 / 160
• Backlight MTBF: 50000 hrs (LED Backlight)
I/O
• Internal Speaker: AMP 10W + 10W
• OSD Key: LCD On/Off, Auto, Menu, Up and Down
Touch
• Resistive 5-wire: IMP-M190T Only
• Projected Capacitive: IMP-M190PT Only
Environment
• Operating Temp.: -10 ° C to 50 ° C
• Storage Temp.: - 20 ° C to 60 ° C
•Relative Humidity: 10% to 95% (non-condensing)
• IP Level: IP 65 Compliant Front Panel
Physical
• Front Panel Construction.: Die-cast Flat Surface
• IMP-M190(P)T
- Dimension: : 450 (W) x 375 (D) x 51 (H)mm
- Weight: TBC
• Mounting: VESA Mounting Holes
75 x 75mm, 100 x 100mm

1
VIO-100 / VIO-200 l User’s Manual
Chapter 1: Product Introductions
1.1.6 IMP-M220(P)T
Key Features
21.5” TFT Full HD 16:9 LCD with Resistive 5-wire / Projected Capacitive Touch
-10 ° C to 60 ° C extended operating temperature
Designed with Aluminum Die-Casting Front Frame
IP65 Compliant Front Panel
Two 10W Internal Speakers Built-in
Multi-language OSD built-in
IMP-M220(P)T
Hardware Specification
Display
• LCD Size: 21.5” (16:9)
• Max. Resolution: 1920 x 1080 (Full HD)
• Brightness (cd/m2): 300
• Contrast Ratio: 5000 : 1
• LCD Color: 16.7M
• Pixel Pitch (mm): 0.248 (H) x 0.248 (V)
• Viewing Angle (H-V): 178 / 178
• Backlight MTBF: 50000 hrs (LED Backlight)
I/O
• Internal Speaker: AMP 10W + 10W
• OSD Key: LCD On/Off, Auto, Menu, Up and Down
Touch
• Resistive 5-wire: IMP-M220T Only
• Projected Capacitive: IMP-M220PT Only
Environment
• Operating Temp.: -10 ° C to 60 ° C
• Storage Temp.: - 20 ° C to 60 ° C
• Relative Humidity: 10% to 95% (non-condensing)
• IP Level: IP 65 Compliant Front Panel
Physical
• Front Panel Construction.: Die-cast Flat Surface
• IMP-M220(P)T
- Dimension: : 528.5 (W) x 324 (D) x 47 (H)mm
- Weight: TBC
• Mounting: VESA Mounting Holes
75 x 75mm, 100 x 100mm

1
VIO-100 / VIO-200 l User’s Manual
Chapter 1: Product Introductions
1.2 Mechanical Dimensions
1.2.1 IMP-M120(P)T
Unit: mm
1.2.2 IMP-M150(P)T
Unit: mm

17
VIO-100 / VIO-200 l User’s Manual
Chapter 1: Product Introductions
1.2.3 IMP-M160(P)T
Unit: mm
1.2.4 IMP-M170(P)T
Unit: mm

18
VIO-100 / VIO-200 l User’s Manual
Chapter 1: Product Introductions
1.2.5 IMP-M190(P)T
Unit: mm
1.2.6 IMP-M220(P)T

Chapter 2
Front Panel Controls

-100 / VIO-200 l User’s Manual
Chapter 2: Front Panel Controls
20
2.1 Users Controls
POWER
LED
MENU
INCR EASE
DECREASE
AUT O
2.1.1 Power Button
Turns the monitor on or off.
2.1.2 LED
1. Blue indicates power on.
2. Yellow indicates HDD access status (when working with PC module).
Yellow indicates standby mode (when working with MX module).
2.1.3 MENU/ Enter Button
Press to view the OSD menu. Press it again to enter a selection in the OSD menu.
2.1.4 Increase Button
1. Activates the Volume control menu, and increases volume (with audio option).
2. Scrolls the OSD menu upward.
3. Increases the value of a selected function.
2.1.5 Decrease Button
1. Activates the Volume control menu, and decreases volume (with audio option).
2. Scrolls the OSD menu downward.
3. Decreases the value of a selected function.
2.1.6 AUTO/ Exit Button
1. When the OSD menu is active, press this button to exit the OSD menu.
2. When the OSD menu is inactive, press this button for two seconds to activate the Auto Adjustment
function and the monitor will automatically optimize the display position, focus, and clock of your
display.