Sony LMD1951MD User manual

Features and Benefits:
• SXGA LCD Panel with LED Backlight Technology:
high quality panel that produces bright high-contrast
images
• Sony ChromaTRU Color Balance: advanced color
space conversion and white balance calibration
technology for vivid and accurate colors
• Full 10-bit Digital Video Signal Processor: to produce
accurate and lifelike images with smooth and natural
gradation
• Variety of Scan/Display Modes: including Mirror Image,
and Picture-in-Picture which allows users to view two
images at a time
• 5:4 Aspect Ratio Signal Output: designed to be used
with SD and HD systems
• AC and DC Operation: depending on installation
requirements. For DC Operation, the optional
AC-110MD is required.
• Two Built-in Option Slots: to easily expand, select, and
change input/output signals via optional input
adapter boards
*Viewable area measured diagonally
Sony introduces the LMD-1951MD 19"medical grade LCD monitor*
to its comprehensive display line-up. It offers a superb combination
of newly employed LED backlight technology to reproduce brighter
images along with a high quality SXGA (1280 X 1024) LCD panel.
Designed to be used in both SD and HD systems, this new monitor
also inherits an array of exceptional features from the popular
LMD-2451MD including 10-bit signal processing to produce
accurate and lifelike images, and enhanced viewing modes
such as Picture-in-Picture and Mirror Image.
The LMD-1951MD is equipped with a full range of inputs including
Composite, Y/C, RGB/Component, HD15, and DVI-D inputs.
Furthermore, the two built-in option slots accept a variety of option
boards to offer ultimate flexibility including 3G-SDI input signal and
DVI input/output capability to accept up to two DVI-D inputs
and one DVI loop-through output allowing users to easily
expand, select, and change input/output configuration.
LMD-1951MD
19" medical grade LCD monitor
with LED backlight technology

©2011 Sony Electronics Inc. All rights reserved. Reproduction in whole or in part without written permission is prohibited. All non-metric weights and measurements are
approximate. Features and specifications are subject to change without notice. Sony, Sony make.believe, and their respective logos, are trademarks of Sony.
VESA is a trademark of the Video Electronics Standards Association. All other trademarks are trademarks of their respective owners.
Caution: Federal (USA) law restricts this device to sale by or on the order of a physician or other appropriately licensed medical professional.
Caution: See product labeling for indications, contraindications, warnings, cautions and directions for use. ME-LMD1951
Specifications
Panel
Screen Size 19" (Viewable area measured diagonally)
Panel a-Si TFT Active Matrix LCD
Resolution (H x V) 1280 x 1024 pixels (SXGA)
Effective Picture Size (W x H/Dia) 376mm x 301mm / 481.84mm,dia
Aspect 5:4
Colors Approx. 16,770,000 colors (8-bit)
Viewing Angle (Panel Specification) 89° /89° /89° /89° (Typical, upp/down/left/right, contrast>10:1
Input
Composite BNC (x1), Vp-p ±3dB sync negative
Y/C 4-pin Mini DIN x1
Mini-DIN 4-pin (x1)
Y: 1 Vp-p ±3dB sync negative
C: 0.286 Vp-p ±3dB (NTSC burst signal level),0.3 Vp-p ±3dB
(PAL burst signal level)
RGB, Component BNC (x3)
RGB: 0.7Vp-p ±3dB (Sync On Green, 0.3 Vp-p sync negative)
Component: 0.7 Vp-p ±3dB (75% chrominance standard color bar signal)
External Sync BNC (x1)
0.3 to 4.0 Vp-p bipolarity ternary or negative polarity binary
DVi-D DVI-D (x1)
TMDS single link
HD15 D-sub 15-pin (x1)
R/G/B: 0.7 Vp-p sync positive (Sync On Green, 0.3 Vp-p sync negative)
Sync: Total level (polarity free, H/V separate sync)
Plug & Play function: corresponds to DDC28
Option Port Two (2) ports
Signal format: H: 15 kHz to 45 kHz, V: 48 Hz to 60Hz
Remote Parallel Remote Modular connector 8-pin (x1) (Pin-assignable)
Serial Remote D-sub 9-pin (RS-232C) (x1), RJ-45 (x1)
(Ethernet, 10BASE-T/100BASE-TX)
DC IN XLR-type 4-pin (male) (x1), 5V/24V DC
(output impedance 0.05 ohms or less)
Output
Composite BNC (x1), Loop-through, with 75 automatic termination function
Y/C Mini-DIN 4-pin (x1), Loop-through, with 75 automatic termination function
RGB, Component BNC (x3), Loop-through, with 75 automatic termination function
External Sync BNC (x1), Loop-through, with 75 automatic termination function
General
Power Requirement AC IN: 100-240 V AC, 50/60 Hz, 0.92 A - 0.40 A
DC IN: 24V 3.5A 5V 0.030 A (Supplied from AC-110MD)
With AC-110MD
AC IN: 100-240 V AC, 50/60 Hz, 1.53 A -0.58 A
Power Consumption Maximum: approx. 85W (with “BKM-229X” x2)
Temperature 0° C to 35° C (32° F to 95° F)
Recommended Temperature 20° C to 30° C 68° F to 86° F)
Humidity 30% to 85% (no condensation)
Pressure 700 hPa to 1060 hPa
Storage and Transport Temperature -20° C to + 60° C (-4° F to 140° F)
Storage and Temperature Humidity 0% to 90% (no condensation)
Storage and Temperature Pressure 700 hPa to 1060 hPa
Dimensions (wxhxd) (mm) 455.8 x 368.3 x 101.7 (including the projection parts, w/o stand)
Mass (kg), w/o optional stand Approx. 6.7kg (w/o optional input adaptor) Approx. 7.1kg (with “BKM-229X” x 2)
Supplied Accesories
AC Power Cord (1)
AC Plug Holder (2)
Instructions for Use (1) CD-ROM (1)
Using the CD-ROM Manual (1)
Quick Reference (1) When You First Use
the Monitor (1)
Sales Companies Guide (1)
Warranty Book (1)
Optional Accesories
BKM-220D SDI 4:2:2 Input Adaptor
BKM-243HS HD/D1-SDI Input Adaptor
BKM-227W NTSC/PAL Input Adaptor
BKM-229X Analog Component Input Adaptor
BKM-250TG 3G/HD/SD-SDI Input Adaptor
BKM-256DD DVI-D Input/Output Adaptor
SU-560 Monitor Stand
AC-110MD AC Adaptor
sony.com/medical
LMD-1951 Back Panel