indusigns Tabo User manual

Sidetable | Tabo
Installation manual

2
Content
4st Allen bolts with socket head M5
2st Countersunk socket head screw M5 with nuts
1st Allen key

3
The Tabo side table is easy to install yourself.
01| Preparation
The Tabo side table is easy to install yourself.
1. Place the two parts of the table top face down on a protected at surface. For
example, use a towel for protection.
2. Slide the table legs one by one at an angle into the slots as shown in the drawing.
Make sure the table tops are properly aligned and touching each other.
2
2
11

4
02| Assemble
3. Tighten the outer allen bolts in the 2 holes using the allen key as shown above.

5
4. Place the table upright
5. Place the nuts in the recesses under the table top, as shown in the drawing. Tighten
the countersunk socket head screws using the allen key.