Infineon AIROC IFW956810 User manual

https://www.infineon.com/cms/en/product/wireless-connectivity/
Kit contents
1. IFW956810 single-band Wi-Fi 4 Cloud Connectivity Manager (CCM)
evaluation kit to evaluate the IFW56810 single-band Wi-Fi 4 CCM module
2. USB Type-A (male) to Type-C (female) cable
3. Quick start guide (this document)
Quick start guide
AIROC™ single-band Wi-Fi 4 Cloud Connectivity Manager (CCM) evaluation kit
IFW956810
AIROCTM IFW956810 single-band Wi-Fi 4 Cloud Connectivity Manager (CCM)
evaluation kit features a configurable Wi-Fi connectivity module that provides
a simple, secure, plug-and-play solution for connecting products to IoT cloud
services. This product also integrates Infineon’s CIRRENTTM cloud solutions to
make connected products easier to use, more reliable, and more secure.

Quick start guide
This document guides you in registering your kit with Infineon.
Aer registration, your kit is automatically bound to your Infineon
CIRRENT™ Cloud account. This enables simple and secure provisioning
of your kit to the cloud service of your choice.
Aer completing the steps in this guide, you will be directed to your
personal space in the Infineon Developer Center. Use the resources in the
Developer Center to evaluate the kit and connect to a cloud service.
IFW56810 AIROC™ Cloud Connectivity Manager evaluation kit board details
RST
TXD
RXD
EN
GND
VDD_33
INT
MSG
NC
FTDI_UART_RXD
FTDI_UART_TXD
NC
GND
VDD_33_USB
NC
NC
USB Type-C male plug
8x2 pin header (J60)
Printed antenna
IFW56810 module
the unique URL consists of
https://qr.infineon.io AND
the unique module ID
Unique module ID
azw346F248ED318

Quick start guide
Repeat the following steps for each kit.
1. Do one of the following. Either method will take you to the login page.
• Enter the unique URL printed on the evaluation kit in a web browser.
The URL has the following format:
https://qr.infineon.io/<unique_module_id>
Note that the module identifier is case-sensitive.
If you are taken to www.infineon.com instead of the login page,
verify that the URL is entered correctly.
• Scan the unique QR code printed on the evaluation kit.
2. Log in with your Infineon account. Create a new Infineon account
if you don’t have one.
3. Choose an existing sub account, or create a new sub account if you don’t
have one.
You can have multiple sub accounts to manage your kits in the CIRRENT™
Cloud. While creating a new sub account, keep the default role
(developer), and click Do it later to skip adding teammates now.
You will now be redirected to Infineon Developer Center.
4. Follow the instructions in the Getting Started tab to connect the
kit to the cloud service of your choice.
Notes:
• Repeat these steps to register your kit to a different account or
sub account. You can register a kit to only one account and one sub
account at a time.
• Follow the guidance in the email received from Infineon to explore your
personal space in Infineon Developer Center.
Register the kit on Infineon Developer Center

Quick start guide
Date: 04/2022 All rights reserved. ©2022 Infineon Technologies AG
Document number: 002-34635 Rev. **