Infinite Peripherals LINEA PRO 6 User manual

LINEA PRO®6
iPhone®6 1D/2D SCANNER
LINEA PRO 6 USER MANUAL

Linea Pro 6 User Manual Page 1 of 31
UM-00003 Version: A
CONTACT INFORMATION
United States:
United Kingdom:
Ireland:
Web:
General enquiries:
Support:
XXXTUJNBSFOFU
JOGP!TUJNBSFOFU
TVQQPSU!TUJNBSFOFU
5FKPO4USFFU
%FOWFS$0

64"
1IPOF
6OJU#SBNCFS$PVSU
#SBNCFS3PBE
-POEPO818
6OJUFE,JOHEPN
1IPOF
"1BUSJDL4USFFU
%VO-BPHIBJSF
$P%VCMJO
":)
*SFMBOE
1IPOF

Linea Pro 6 User Manual Page 2 of 31
UM-00003 Version: A
LEGAL NOTICE
“Made for iPhone” means that an electronic accessory has been designed to connect specifically to
the iPhone and has been certified by the developer to meet Apple performance standards. Apple is
not responsible for the operation of this device or its compliance with safety and regulatory standards.
Please note that the use of this accessory with iPhone may affect wireless performance.
COMPATIBILITY
Made for:
iPhone® 6 mobile digital device
iPhone® is a trademark of Apple, Inc., registered in the U.S. and other countries.
Lightning™ is a trademark of Apple, Inc.
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such
marks by Apple is under license.
Linea Pro® 6 is a registered trademark of Infinite Peripherals, Inc.

Linea Pro 6 User Manual Page 3 of 31
UM-00003 Version: A
Table of Contents
CONTACT INFORMATION.......................................................................................................................................................1
LEGAL NOTICE...........................................................................................................................................................................2
COMPATIBILITY .........................................................................................................................................................................2
BOX CONTENTS.........................................................................................................................................................................5
ACCESSORIES ............................................................................................................................................................................6
GETTING STARTED .................................................................................................................................................................7
Warnings, Cautions and Notes............................................................................................................................................7
First Steps ...............................................................................................................................................................................7
LINEA PRO 6 FEATURES........................................................................................................................................................8
LINEA PRO 6 PRODUCT OVERVIEW................................................................................................................................9
Figure 1: Front View ....................................................................................................................................... 9
Figure 2: Top View ......................................................................................................................................... 9
Figure 3: Bottom View .................................................................................................................................10
Figure 4: Back View .....................................................................................................................................10
ASSEMBLING YOUR LINEA PRO 6....................................................................................................................................11
Figure 5: Assembly ........................................................................................................................................11
CHARGING YOUR LINEA PRO 6 .......................................................................................................................................12
Charging the Linea Pro 6 through the USB Port ...........................................................................................................12
Figure 6: USB Sync/Charge Port ............................................................................................................... 12
Figure 7: Battery Status Indicators ............................................................................................................13
DEVELOPING APPLICATIONS FOR YOUR LINEA PRO 6 .......................................................................................14
POWERING ON YOUR LINEA PRO 6...............................................................................................................................15
Dual Purpose Scan Button..................................................................................................................................................15
Figure 8: Dual Purpose Scan Button .........................................................................................................15
LINEA PRO 6 STATUS AND OPERATIONAL MODES................................................................................................16
USING YOUR LINEA PRO 6.................................................................................................................................................17
Barcode Scanner - 1D Barcodes ........................................................................................................................................17
Figure 9: 1D Barcode Scanning .................................................................................................................. 17
Barcode Scanner - 2D Barcodes....................................................................................................................................... 18
Figure 10: 2D Barcode Scanning ................................................................................................................18
Magnetic Stripe Reader (MSR) ......................................................................................................................................... 19
Figure 11: Magnetic Stripe Reader .............................................................................................................19
Contactless Card Reader (RFID) ..................................................................................................................................... 20
Figure 12: RFID Reader ...............................................................................................................................20
Syncing....................................................................................................................................................................................21
Figure 13: Syncing through USB Port ........................................................................................................ 21
RESETTING YOUR LINEA PRO 6 ..................................................................................................................................... 22

Linea Pro 6 User Manual Page 4 of 31
UM-00003 Version: A
Figure 14: Reset Function ........................................................................................................................... 22
SERVICING YOUR LINEA PRO 6 ...................................................................................................................................... 23
Battery Replacement ..........................................................................................................................................................23
Figure 15: Battery Replacement/Servicing ............................................................................................. 23
SRED Encrypted MSR Information...................................................................................................................................24
TROUBLESHOOTING ............................................................................................................................................................ 25
Troubleshooting > Card Reading .....................................................................................................................................25
Troubleshooting > Barcode Scanning.............................................................................................................................25
Troubleshooting > Contactless Card Reading...............................................................................................................26
TECHNICAL DATA .................................................................................................................................................................. 27
WARRANTY ..............................................................................................................................................................................29
DISCLAIMER.............................................................................................................................................................................29
SYMBOLS FOR USE...............................................................................................................................................................30
FEDERAL COMMUNICATIONS COMMISSION..............................................................................................................31
Federal Communications Commission (FCC) Statement ............................................................................................31
FCC RF Radiation Exposure Statement...........................................................................................................................31

Linea Pro 6 User Manual Page 5 of 31
UM-00003 Version: A
BOX CONTENTS
The Linea Pro 6 ships with the items listed below:
Qty Part Number Description Image
1
*LP6-BTRE-PH6
*LP6-E-PH6
*LP6-EF-PH6
*LP6-I2D-PH6
*LP6-I2DBT-PH6
*LP6-I2DBTRE-PH6
*LP6-I2DE-PH6
*LP6-I2DE-PH6
*LP6-I2DEF-PH6
*LP6-ID2DR-PH6
*LP6-MS-PH6
*LP6-MSE-PH6
*LP6-N2DBTRE-PH6
*LP6-PH6
*LP6-R-PH6
*LP6-S-I2DBTF-PH6
*LP6-S-I2DBTR-PH6
Linea Pro 6
1 PSL-T6H16-40 Screw M1.6x4 - Security Torx
1 A5005-017 USB charge/sync cable*
*Note: Box contents may vary based on ordered configuration.

Linea Pro 6 User Manual Page 6 of 31
UM-00003 Version: A
ACCESSORIES
The following accessories may be purchased for use with the Linea Pro 6:
Part Number Description
CS-R-LP61D-STR-G/BK Rugged case for Linea Pro 6 1D model without MSR, Gray/BLK
CS-R-LP62D-STR-G/BK Rugged case for Linea Pro 6 2D model without MSR, Gray/BLK
CS-R-LP62D-STR-IPC Rugged Case for LP6 2D
CS-RMS-LP61D-STR-G/BK Rugged case for Linea Pro 6 1D model with MSR, Gray/BLK
CS-RMS-LP62D-STR-G/BK Rugged case for Linea Pro 6 2D model with MSR, Gray/BLK
CS-RMS-LP62D-STR-IPC Rugged Case for LP62D w/Strap
HOL-LP6-C-W-MC-SHL Closed top holster with metal belt clip and shoulder strap for Linea
Pro 6 with rugged case, including hand strap and pad
PSLP1-LP6 Linea Pro 6 Single Station Charger
PSLP1-LP6-KIT 1 Unit “drop-in” Charger (iPhone) Single station charger with USB
cable and Belkin AC adapter
PSLP5-LP6 5 Unit Charger Kit (iPhone) Five Station Charger
CS-LP6-PG Pistol grip for Linea Pro 6. Fits iPhone 6 with Linea Pro 2D Scanner.
Includes battery, and silicone sleeve.

Linea Pro 6 User Manual Page 7 of 31
UM-00003 Version: A
GETTING STARTED
Warnings, Cautions and Notes
Please observe the Warnings, Cautions and Notes presented throughout this manual. An explanation
of these items is provided below:
Symbol Description
WARNING: Actions may result in a serious outcome (e.g., injury, death or other adverse affect)
to the user.
CAUTION: Special care is required to avoid damage to the product or other property.
Note: Important points and tips about the product are being provided.
First Steps
The Linea Pro 6 allows customers to scan barcodes and capture magnetic stripe information into the
iPhone. Before using your Linea Pro 6, the battery should be properly charged.
The following table will help you get the Linea Pro 6 ready for use:
Step Purpose Additional Information
1. Integrate your
Linea Pro 6 with
the iOS Device.
Connecting your Linea Pro 6 to your
iPhone
See manual section:
ASSEMBLING YOUR
LINEA PRO 6
2. Charge your Linea
Pro 6
The battery should be fully charged before
use to ensure long battery life.
See manual section:
CHARGING YOUR
LINEA PRO 6
3. Install software Device features requires the installation
of software on your iOS device.
See manual section:
DEVELOPING APPLICATIONS
4. Power on your
Linea Pro 6
Initialize the Barcode Scanner, Magnetic
Stripe Reader (MSR) and/or Radio
Frequency Identification (RFID) functions
for use.
See manual section:
POWERING ON YOUR
LINEA PRO 6

Linea Pro 6 User Manual Page 8 of 31
UM-00003 Version: A
LINEA PRO 6 FEATURES
The Linea Pro 6 allows mobile employees to convert their iPhone into a powerful solution for the retail,
warehousing, supply chain, ticketing and hospitality industries. The Linea Pro 6 includes an encrypted
or unencrypted 3-track magnetic stripe reader, optional 1D or 2D barcode scanner, optional Bluetooth®,
and optional RFID.
Feature Description
1D/2D Barcode Scanner
The Linea Pro 6 supports one-dimensional (1D) and two-dimensional (2D)
barcode symbols, which can be read in any direction (omni-directional).
The effective reading distance of the barcode reader varies depending
on the barcode size. The barcode scanner is also capable of reading
barcodes on an LCD screen.
Magnetic Stripe Reader
(MSR)
The Linea Pro 6 has a built-in magnetic stripe reader. The card reader
incorporates a (3) track, bi-directional magnetic read head, requiring a
single swipe to read field data from all three tracks.
Contactless Card
Reader (RFID)
The Linea Pro 6 has an RFID tag/card reader with read and write
capability at 13.56 MHz. The RFID reader incorporates several RFID
formats, depending on the model of your Linea Pro 6.
Bluetooth
Compatibility
Available Bluetooth 2.0 SPP compatibility, which allows connection to a
Bluetooth peripheral, such as a printer.
Syncing The Linea Pro 6 enables your iOS device to be synced with iTunes.
Indicators The Linea Pro 6 uses (4) LEDs to indicate battery status levels.
Battery Status The battery status may be checked by pressing the Battery Status button.
Note:
Use of the Barcode Scanning, Magnetic Card and/or RFID reader features requires the
installation of special software. Please contact your reseller to inquire about available
software, or contact Infinite Peripherals directly for recommendations on compatible third
party software solutions.

Linea Pro 6 User Manual Page 9 of 31
UM-00003 Version: A
LINEA PRO 6 PRODUCT OVERVIEW
9-pin Lightning™
connector
Figure 1: Front View
Scan Engine
Volume Controls
Figure 2: Top View

Linea Pro 6 User Manual Page 10 of 31
UM-00003 Version: A
Audio Connector
USB Sync/Charge Port
Battery Status Button &
Indicators
Figure 3: Bottom View
iPhone On/Off Button
Scan Button
Magnetic Stripe
Reader
Figure 4: Back View

Linea Pro 6 User Manual Page 11 of 31
UM-00003 Version: A
ASSEMBLING YOUR LINEA PRO 6
1. Remove the top of the Linea Pro 6 case.
2. Insert the iPhone 6 device.
3. Connect the iOS device by firmly sliding it onto the Lightning connector.
4. Guide the top piece onto the Linea Pro 6 using the large snap and firmly press the top piece onto
the body of the Linea Pro 6.
5. Secure the top piece into place using the Torx screw provided with your unit.
Figure 5: Assembly

Linea Pro 6 User Manual Page 12 of 31
UM-00003 Version: A
CHARGING YOUR LINEA PRO 6
Charging the Linea Pro 6 through the USB Port
The Linea Pro 6 uses a Lithium ion rechargeable battery. The battery should be fully charged prior to
the first use.
The Linea Pro 6 supports pass through charging to the iOS device. The iPhone and Linea Pro 6 may
be charged together via the mini USB port or by placing it in a Linea Pro 6 Single or 5-Unit Charging
Station. Due to current charging limitations, the Linea Pro 6 should not be charged via USB from a PC/
Mac connection.
To Charge the Linea Pro 6:
1. Connect mini USB charger cable to the USB port (shown in the figure below).
USB Sync/Charge Port
Figure 6: USB Sync/Charge Port
CAUTION:
To prevent electrical damage to the Linea Pro 6 and/or battery, please use approved USB
to Mini USB cables only.
Note:
The battery should be charged in an ambient operating temperature of 0°C to +40°C.
Charging time for a fully drained battery is approximately 5h and 30 min to achieve full charge
status.
If the device is equipped with encrypted magnetic stripe reader, do not allow the battery to fully
discharge. The device will disconnect from the iPhone when the battery is drained below 3.6V.

Linea Pro 6 User Manual Page 13 of 31
UM-00003 Version: A
Battery Status Indicators
The battery status may be checked by pressing the Battery Status button.
The table below identifies the battery charge status by number of LED indicators illuminated on the
device.
Battery Status Indicators
Figure 7: Battery Status Indicators
Battery Charge Status
1 LED 1% - 25% charge
2 LED 26% - 50% charge
3 LED 51% - 75% charge
4 LED 76% - 100% charge
Note:
The iPhone 6 is not required to be connected to the Linea Pro device to check the battery
status.

Linea Pro 6 User Manual Page 14 of 31
UM-00003 Version: A
DEVELOPING APPLICATIONS FOR YOUR LINEA PRO 6
Software is not provided with your Linea Pro 6. Please contact your reseller or Infinite Peripherals for
Third Party software solutions.
Integrating the Linea Pro 6 into your iOS application requires the use of the Infinite Peripherals
Universal SDK. The SDK incorporates an API specifically for developing applications to use Linea Pro
6 functionality.
For additional details on using the Infinite Peripheral Universal SDK, please refer to the appropriate
SDK documentation.
For the latest Infinite Peripheral Universal SDK please visit our developer portal at:
http://www.ipcprint.com/developer
PROGRAMMABLE OPTIONS
Below are optional settings for the Linea Pro 6 which can be configured via the SDK.
Programmable Options Description
Charging Current Charging current may be set to 500mA (default) or 1A
Set Charging
The Linea Pro 6 can charge the iPhone 6 using its internal battery by
enabling the “setCharging” setting. When the Linea Pro 6 battery is
above 20%, it will then start to charge the iPhone 6 battery
Enable Scan Button In order to scan, the Enable Scan Button option must be set in the SDK.
Scan Mode
Linea Pro 6 supports the following Scan modes:
• Single Scan
Scanning a single barcode by pressing and releasing the Scan but-
ton.
• Multi Scan
Scanning multiple barcodes by pressing and holding the Scan but-
ton.
• Motion-Detect
Scanner is activated automatically when barcode is placed near the
barcode engine.
• Multi-Scan without Duplicates
Scanning multiple barcodes without duplicates.
Pass Through Sync
When the pass through sync setting is enabled and the USB cable is
plugged in, the iPhone 6 may be synced with a PC or MAC.
When syncing is required, enable the Pass through Sync setting in the
SDK. When this option is selected and the USB cable is plugged in, the
Linea Pro 6 will disconnect and the user will no longer be able to scan.
In order to use the scanner again, the USB cable must be removed.
Idle Time Default setting is 5400 seconds (90 minutes).

Linea Pro 6 User Manual Page 15 of 31
UM-00003 Version: A
POWERING ON YOUR LINEA PRO 6
Dual Purpose Scan Button
The Linea Pro 6 uses one dual-purpose button to power on the unit and to scan barcodes.
To Power on the Linea Pro 6:
1. With the Linea Pro 6 in powered off, press the Scan button until a single beep is sounded. This
indicates that the Linea Pro 6 is now ready for use.
2. Press the Scan button a second time to activate the scanner for normal barcode scanning.
Scan Button
Figure 8: Dual Purpose Scan Button
Note:
When the Linea Pro 6 is left idling for an extended period, the power is automatically turned off to
preserve the charge on the internal battery pack.

Linea Pro 6 User Manual Page 16 of 31
UM-00003 Version: A
LINEA PRO 6 STATUS AND OPERATIONAL MODES
The Linea Pro 6 additionally uses the battery indicator LEDs to indicate various modes of operation.
LED lighting indicators provide information regarding connection status, charging and/or low battery
conditions.
The following table explains these conditions and their corresponding LED indication.
Operating Status
No LEDs are lit Linea Pro 6 is in sleep or ready mode
Multiple LEDs are lit Linea Pro 6 is displaying battery level status.
One LED is flashing Linea Pro 6 is charging and syncing.

Linea Pro 6 User Manual Page 17 of 31
UM-00003 Version: A
USING YOUR LINEA PRO 6
Barcode Scanner - 1D Barcodes
The Linea Pro 6 1D model uses a scan engine that supports one-dimensional (1D) barcode symbols. The
effective reading distance of the barcode reader varies depending on the barcode size.
To Scan a 1D Barcode:
1. Activate the Linea Pro 6 by pressing the Scan button.
2. Position the scan head as close to the barcode label as possible so that the scan line crosses both
ends of the barcode as shown in the figure below.
3. Slowly pull the unit back, increasing the distance between the barcode and scan head, until the
barcode has been read by the scanner.
Scan Button 15-20 cm
Figure 9: 1D Barcode Scanning

Linea Pro 6 User Manual Page 18 of 31
UM-00003 Version: A
Barcode Scanner - 2D Barcodes
The Linea Pro 6 2D model uses a scan engine that supports one-dimensional (1D) and two-dimensional
(2D) barcode symbols. The effective reading distance of the barcode reader varies depending on the
barcode size.
To Scan a 2D Barcode:
1. Activate the Linea Pro 6 by pressing the Scan button.
2. Position the scan head so that the pointer is aimed at the barcode, and the barcode is within the
width of the red illumination box.
3. Slowly pull the unit back, gradually increasing the distance between the barcode and scanner, until
the barcode has been read by the scanner.
15-20 cm
Scan Button
Figure 10: 2D Barcode Scanning

Linea Pro 6 User Manual Page 19 of 31
UM-00003 Version: A
Magnetic Stripe Reader (MSR)
The Linea Pro 6 has a built-in magnetic stripe reader. The MSR incorporates a 3-track, bi-directional,
encryption-capable magnetic read head. A single swipe can read field data from all three tracks.
The MSR will function as an unencrypted MSR until an encryption key is injected into the MSR head
by a designated Infinite Peripherals key injection facility. Please contact an Infinite Peripherals account
representative for more information.
To Use the Magnetic Stripe Reader
1. Activate the Linea Pro 6 by pressing the Scan button.
2. Insert the card into either end of the reader with the magnetic stripe face up, then swipe the card
through toward the other end of the reader.
Swipe direction
Figure 11: Magnetic Stripe Reader
Note:
Keep the edge of the card flat on the inner edge of the reader to ensure that the magnetic stripe passes
over the read head evenly.