Infinite Peripherals OPL-2724 User manual

OPL-2724 Quick Start
About Your OPL-2724:
The OPL-2724 scanner is a breakthrough in affordable wireless laser scanning. The scanner has the
scanning performance of more expensive laser scanners, the convenience of hand-held portability, and the
advantage of Bluetooth®wireless technology.
Pairing Overview:
Depending on the type of device to be connected to the OPL-2724, the steps to connect using Bluetooth®
could be slightly different. Follow the steps below to pair your scanner to your device.
[Step 1] – Discovery Mode
To pair the scanner with device, place the scanner into Discovery mode. Press and hold the scan button
for approximately 3 seconds until the scanner beeps or the blue LED starts flashing.
[Step 2] – Add Scanner to Bluetooth Manager
To add the scanner to your Bluetooth®device, open the Bluetooth®Manager or Bluetooth®Option on the
device. Select Add Device or Discover Device depending on the type of device you are using. Select the
scanner ID “OPL-2724_IP” from the list of nearby devices before continuing.
When prompted to enter a Passkey, enter the value “0000”.
[Step 3] – Loading Scanner Driver
For details on loading scanner drivers refer to the scanner’s user manual or the driver’s user manual.
Un-pairing Scanner:
The OPL-2724_IP Bluetooth®scanner stores the previously paired device information internally. If the
scanner needs to be paired to another device, scan the un-pair barcode below to clear the previously
paired device from the scanner’s flash memory.
,.VOQS., 
+-UNPR-+
Infinite Peripherals, Inc.
www.ipcprint.com
Laser engine
LED indicator
Battery door
Scan trigger button