FY operation manual
- 3 -
Chapter 1
SAFETY INFORMATION
1.1"Important Safety Information
Before using your INFINITY FY6250LQ InkJet Digital Printer, Please read following safety information. Pay
attention to the cautions on the Printer.
•Don’t block the hole on the cover.
•Don’t insert any object into the Printer groove. Don’t let any kind of moistures splash into Printer.
•Only use the Power Supply according to the label. You may choose either AC 110V or 220V for
different countries and regions.
•Please make sure the connection is correct for the Power Supply Cable before turning on the Printer
•Avoid to use the Socket controlled by the switch on the wall or by auto timing controller
•Please keep Printer away from the Magnet Interaction, For example: Speaker and Mobil-phone
•Don’t use damaged Electrical Power wire
•Don’t try to repair Printer by yourself
•Contact your Local Service Center to repair, if the following situations occur:
Power wire or Socket damaged
Liquid splashes into Printer
Printer damaged and Cover broken
Printer can’t work properly or printing quality has conspicuous change
1.2"Caution When Using Printer
•Don’t use your hand to move print head; otherwise the Printer will be damaged.
•Always use power switch to Turn On/Off the Printer. Before Shutting down the Printer, do not pull
out Power Supply wire or Data Wire.
•Before moving the Printer, please make sure the Print head at Original position and firmed.
1.3"Guidance When Using Ink Container
•Keep ink container away from children. Don’t drink or touch.
•If ink spills on the skin, please wash with soap and water. If ink splashes into eye, please wash with
water immediately
•Don’t shake the ink container, which causes ink leak.
•After three months, you should take off the ink container, clean it and dry it.
•Please keep surrounding clean when you replace a new ink container. It helps you improve printing
quality.
1.4"Choosing Printer Installation Place
•Make sure to leave enough space for the Printer; otherwise, the Printer may not work properly.
•Don’t leave Printer at a place where temperature and humidity change severely. Avoid sunshine,
strong light and heat.
•Avoid shaking and vibration.
•Keep sufficient room for air circulation.
•Place Printer nearby the Power socket, so it is easy to connect or disconnect the Power Supply
