
© 2008 Harman International Industries, Incorporated.
All rights reserved. Part No. INFREFSUBPI3-08
Features, specifications and appearance are subject to change
without notice. Designed, edited and digitally produced by the
Harman Consumer Group Marketing & Design Center, Woodbury, NY.
Infinity is a trademark of Harman International Industries,
Incorporated, registered in the United States and/or other countries.
250 Crossways Park Drive, Woodbury, NY 11797 USA
516.674.4INF (4463) Fax 516.682.3556
www.infinitysystems.com
LARGE-ROLL
RUBBER SURROUND
PROGRESSIVE
SPIDER
VENTED
POLEPIECE
PROPRIETARY
BASKET
850w
8" (200mm) Subwoofer
Polypropylene woofer cone
Proprietary reduced-depth frame
Single 4-ohm voice coil
Sensitivity: 91dB
Frequency response: 30Hz – 400Hz
Power handling, RMS: 200 watts
Power handling, peak: 800 watts
1050w
10" (250mm) Subwoofer
Polypropylene woofer cone
Proprietary reduced-depth frame
Single 4-ohm voice coil
Sensitivity: 91dB
Frequency response: 25Hz – 400Hz
Power handling, RMS: 250 watts
Power handling, peak: 1000 watts
1052w
10" (250mm)
Dual-Voice-Coil Subwoofer
Polypropylene woofer cone
Proprietaryreduced-depth frame
Dual 4-ohm voice coils
Sensitivity: 91dB
Frequency response: 25Hz – 400Hz
Power handling, RMS: 250 watts
Power handling, peak: 1000 watts
1250w
12" (300mm) Subwoofer
Polypropylene woofer cone
Proprietary reduced-depth frame
Single 4-ohm voice coil
Sensitivity: 93dB
Frequency response: 23Hz – 400Hz
Power handling, RMS: 300 watts
Power handling, peak: 1000 watts
1252w
12" (300mm)
Dual-Voice-Coil Subwoofer
Polypropylene woofer cone
Proprietary reduced-depth frame
Dual 4-ohm voice coils
Sensitivity: 93dB
Frequency response: 23Hz – 400Hz
Power handling, RMS: 300 watts
Power handling, peak: 1000 watts
LARGE-ROLL
RUBBER SURROUNDS
This material provides optimal
cone-edge suspension and absorbs
distortions that may travel up the
cone edge. The benefit is an audible
reduction in distortion.
PROGRESSIVE SPIDER
Each Reference subwoofer features
aprogressive spider, applying
progressively more force as the
cone travel approaches its limit.
The result is a subwoofer in better
control when pushed to extreme
excursions, delivering more bass,
free from distortion and breakup.
PROPRIETARY TINSEL-
LEAD SUPPORT
This prevents tinsel-lead slap
and ensures that the leads stay
attached to the cone, even at
the woofer’s excursion limits.
PROPRIETARY FRAME
The unique frame design used on
all Reference subwoofers provides
adecrease in mounting depth, while
maximizing woofer excursion. If you
want to add subwoofers in a pickup
or in a confined space, these
subs are the ideal solution.