Infinova V5412-A7004SB User manual

V5412-A7 SERIES
INDOOR DAY/NIGHT MINIDOME CAMERA
User Manual

CONTENTS
1. DESCRIPTION............................................................................................1
2. MAIN FEATURES.......................................................................................2
3. INSTALLATION..........................................................................................3
3.1 MOUNTING PROCESS ........................................................................... 3
3.2 HANDLING PRECAUTIONS.................................................................. 6
3.3 INSTALLATION PRECAUTIONS .......................................................... 6
4. MENU SETTINGS.......................................................................................7
4.1 LENS........................................................................................................ 11
4.2 SHUTTER/AGC ...................................................................................... 12
4.3 PICTURE ADJUSTMENT...................................................................... 13
4.3.1 MIRROR ......................................................................................... 14
4.3.2 BRIGHTNESS ................................................................................ 14
4.3.3 CONTRAST.................................................................................... 14
4.3.4 SHAPRNESS .................................................................................. 14
4.3.5 HUE ................................................................................................. 14
4.3.6 GAIN ............................................................................................... 14
4.4 WHITE BALANCE................................................................................. 15
4.5 NR ............................................................................................................ 17
4.6 CAMERA ID............................................................................................ 17
4.7 LANGUAGE ........................................................................................... 18
4.8 DAY/NIGHT............................................................................................ 19
4.9 BACKLIGHT .......................................................................................... 20
4.10 MOTION DETECTION ........................................................................ 20
4.11 PRIVACY MASK .................................................................................. 21

4.12 ATR ........................................................................................................ 22
4.13 SYNC MODE ........................................................................................ 22
4.14 CAMERA RESET.................................................................................. 22
APPENDIX I SPECIFICATIONS................................................................23
APPENDIX II CABLE DIAMETER CALCULATION AND
LIGHTNING & SURGE PROTECTION...................................................25

1
1. DESCRIPTION
Thank you very much for purchasing our product.
Infinova’s V5412-A7 series indoor day/night fixed minidome cameras feature a
high resolution 1/3" SONY Exview HAD II CCD sensor. Advanced Effio
Digital Signal Processing (DSP) provides 700 TV lines of resolution, excellent
low light performance, and superior color rendering ability and digital noise
reduction function, which ensures high-quality videos under extremely difficult
light conditions.
V5412-A7 series provides privacy mask which effectively protects certain
private areas from being seen and motion detection which provides higher
security for your surveillance.
V5412-A7 series has the day/night functionality, which can automatically
switch the color and B/W modes.
V5412-A7 series offers user-friendly OSD menu, easy to adjust the video
parameters. In addition, its elegant design and compact structure makes it an
ideal surveillance solution for shopping malls, banks, office buildings, parking
lots, city streets and other applications.
This manual is for the following models:
V5412-A7004SB Analog minidome camera, 2-axis, Indoor, 1/3 inch CCD,
Day/night, 700TVL, NTSC, 12VDC/24VAC, Surface mount,
clear bubble, 2.5-6mm vari-focal lens
V5412-A7014SB Analog minidome camera, 2-axis, Indoor, 1/3 inch CCD,
Day/night, 700TVL, PAL, 12VDC/24VAC, Surface mount,
clear bubble, 2.5-6mm vari-focal lens
V5412-A7004SE Analog minidome camera, 2-axis, Indoor, 1/3 inch CCD,
Day/night, 700TVL, NTSC, 12VDC/24VAC, Surface mount,
clear bubble, 3.3-12mm vari-focal lens
V5412-A7014SE Analog minidome camera, 2-axis, Indoor, 1/3 inch CCD,
Day/night, 700TVL, PAL, 12VDC/24VAC, Surface mount,
clear bubble, 3.3-12mm vari-focal lens

2
2. MAIN FEATURES
y1/3" SONY Exview HAD II CCD sensor
yHigh resolution up to 700TVL
yIR-Cut Removable (ICR) Filter for Day/Night switching
yCompact structure, elegant design, easy to install
yOSD menu in multiple languages
y2D digital noise reduction, high S/N ratio, clear image
yHighlight Compensation (HLC)
yMotion detection
yPrivacy mask
yAuto Electronic Shutter (AES), Auto Gain Control (AGC), Backlight
Compensation (BLC)
yMultiple white balance modes and superior color rendering ability
yCCD blemish compensation
yMirror, Hue, and Color Gain adjustable
y12VDC/24VAC power supply, centralized power supply supported
yInternal / Line Lock Sync. System

3
3. INSTALLATION
3.1 Mounting Process
STEP 1: Secure Dome’s Adapter in the desired ceiling position with the 3
fixed screws as shown in Figure 1.
Figure 1
The adapter mounting holes are as shown in Figure 2: (Unit: mm)
3- Ø4.40
Ø106.00
120°
120°
Figure 2
STEP 2: Remove the Dome Cover. Align the 3 grooves of the camera unit
with the 3 bolts in the adapter and turn counterclockwise to tighten it.

4
Figure 3
Notes: The mini-dome camera supports sync system of INT/L.L., which can
be set by the DIP switch on the back panel of the mini-dome camera.
STEP 3: The vertical angle can be adjusted by loosening the screws as shown
in Figure 4 and by turning the Camera Case vertically.
Figure 4
STEP 4: The horizontal angle can be adjusted by turning the Camera Case and

5
bracket in Figure 5 and by turning the Camera Platform horizontally.
Figure 5
STEP 5: Then you can adjust the parameters in the OSD menu to set the
desired video quality according to your surveillance requirements. The
detailed instructions are specified in Chapter IV.
STEP 6: Place the Dome bubble over the Camera and tighten it by turning it
to the right. In this process, the shielding cover may block the camera. User
can adjust the position of shielding cover by turning the bubble. With the
shielding cover at the proper position, the installation is finished.
Dimensions: (Unit: mm)
Figure 6

6
3.2 Handling Precautions
1. Never let liquid of any kind flow into this unit.
2. Do not directly touch the CCD element. If it is necessary to clean the element,
use a soft cloth moistened with alcohol to wipe off the dust.
3. If any abnormality occurs, make sure to unplug the unit and contact your
local dealer.
4. This camera possesses AGC circuit. Therefore, when the camera is used
under lower luminance, the sensitivity will strengthen automatically and
make the image very rough in vision. It is normal.
5. When the camera is used in ATW mode, due to the working principle of
automatic tracking white balance, the recorded color is slightly different from
the real color. It is normal.
6. If the subject is with high luminance (like lamp), vertical stripes will occur
on the monitor (tailing shadow) or the surrounding image becomes vague
(flowering). It is special phenomenon of CCD, not error.
7. The power for this camera is 12VDC or 24VAC. Also, it supports centralized
power supply.
3.3 Installation Precautions
1. Do not drop the unit or subject it to strong knock.
2. Do not point the camera lens toward the sun or other strong light.
3. It’s recommended to apply auto-iris lenses for changeful light conditions.
4. Do not install the camera in environment with temperature beyond the
acceptable range (from -10°C to 50°C), or with high humidity, direct rainfall,
frequent vibrations and shocks.

7
4. MENU SETTINGS
Menu Submenu
TYPE DC
MODE AUTO/OPEN/CLOSE
AUTO
SPEED 000~255
LENS
MANUAL
HIGH LUMINANCE
MODE AUTO IRIS / SHUT+AUTO
IRIS
BRIGHTNESS 000~255
LOW LUMINANCE
MODE AGC, OFF
AUTO
BRIGHTNESS ×0.25, ×0.50, ×0.75, ×1.00
MODE SHUT +AGC
SHUT PAL: 1/50~1/100,000;
NTSC: 1/60~1/100,000
SHUTTER/AGC
MANUAL
AGC 0.00~42.00 (8-level)
MIRROR ON/OFF
BRIGHTNESS 000~255 (Default: 000)
CONTRAST 000~255 (Default: 128)
SHARPNESS 000~255 (Default: 064)
HUE 000~255 (Default: 128)
PICT ADJUST
GAIN 000~255 (Default: 128)
SPEED 000~255
DELAY CNT 000~255
ATW FRAME ×0.50~×2.00 (4-level)
ATW
ENVIRONMENT INDOOR/OUTDOOR
PUSH
B-GAIN 000~255
USER 1 R-GAIN 000~255
B-GAIN 000~255
USER 2 R-GAIN 000~255
ANTI-CR
MANUAL LEVEL
WHITE BAL
PUSH
LOCK
NR NR MODE Y/C, OFF, Y, C
CAMERA ID ON

8
Menu Submenu
OFF
LANGUAGE
CHINESE/
ENGLISH/
JAPANESE
IMPULSE OFF/ON
DELAY CNT 000~255
DAY→NIGHT 000~255
AUTO
NIGHT→DAY 000~255
COLOR
DAY/NIGHT
B/W IMPULSE OFF/ON
OFF
BLC
BACKLIGHT
HLC
OFF
DETECT
SENSE 000~127
BLOCK DISP OFF/ON/ENABLE
MONITOR
AREA OFF/ON
AREA SEL 1/4~4/4
TOP PAL: 000~288;
NTSC: 000~244
BOTTOM PAL: 000~288;
NTSC: 000~244
LEFT PAL: 000~468;
NTSC: 000~474
MOTION DET ON
RIGHT PAL: 000~468;
NTSC: 000~474
OFF
AREA SEL 1/4~4/4
TOP PAL: 000~288;
NTSC: 000~244
BOTTOM PAL: 000~288;
NTSC: 000~244
LEFT PAL: 000~468;
NTSC: 000~474
RIGHT PAL: 000~468;
NTSC: 000~474
PRIVACY
ON
COLOR 1~8

9
Menu Submenu
TRANSP 0.00-1.00 (4-level)
MOSAIC OFF/ON
OFF
LUMINANCE LOW/MID/HIGH
ATR ON CONTRAST LOW/MID LOW/ MID/
MID HIGH/HIGH
SYNC INT
CAMERA
RESET
Camera Menu
Notes:
1. The lens built in the camera is DC driven.
2. Sync system can be set to INT or LL by the DIP switch on the back cover of
the camera. It can be enabled or disabled to display in the menu, but not
adjusted.
Menu setting
Five-way switch is used to control the camera menu. The switch is on the
camera cable, as shown in the figure below:

10
1. Press the button, and the MAIN MENU will appear.
2. Press the button UP/DOWN to move through the items or LEFT/RIGHT to
change the selected item’s value.
3. If “ ” is available in an item's value, press the OSD button to enter the
submenu and repeat the previous operations to set it. Select “RETURN ” to
get back to the previous menu.
4. Select NEXT in the SETUP MENU 1 and press the OSD button to enter the
SETUP MENU 2; select BACK in the SETUP MENU 2 and press the OSD
button to get back to the SETUP MENU 1.
5. Select Exit and press the OSD button to exit the menu.
6. Save All: save all the parameter settings. After all parameters settings are
finished properly, please press “Save All” to save all settings and exit the menu.
This operation ensures all camera parameters kept unchanged in case of power
disconnection.
7. Once the intervals of the operation to OSD menu reach 1 minute, the OSD
menu will disappear.
8. Blemish compensation is available. Without menu display, press and hold
down the UP/DOWN button to enable the blemish compensation function.

11
9. To save the modified items, you have to click SAVE ALL before power-off;
otherwise, the settings will be restored to the previous status after the power is
back; also, you have to click SAVE ALL in case of resetting.
4.1 LENS
Function: to set lens type.
Options: Auto , Manual.
1) Auto : Auto iris lens. If selected, parameters including type, mode and
speed of auto iris can be set.
AUTO IRIS
TYPE DC
MODE AUTO
SPEED 080
RETURN
Type: to display the lens drive type. Options: DC/VIDEO. DC means direct
current driven auto iris; VIDEO means video driven lens.
Notes: The built-in lens is DC driven. Please do not set the type to VIDEO.
Mode: AUTO, OPEN, CLOSE.
Speed: 000~255.
Notes: Users can adjust the iris speed for a camera, as an improper speed may
cause the video too bright or dark.
2) Manual: Manual iris lens.

12
4.2 SHUTTER/AGC
Function: to set the shutter/AGC parameters.
Options: Auto , Manual .
1) Auto : if set to Auto , enter the submenu, as shown in the figure below:
AUTO SETUP
HIGH LUMINANCE
MODE SHUT+AUTO IRIS
BRIGHTNESS 044
LOW LUMINANCE
MODE AGC
BRIGHTNESS x0.50
RETURN
High Luminance
Mode: AUTO IRIS, SHUT+AUTO IRIS;
Brightness: 000~255.
Low Luminance
Mode: AGC/OFF;
Brightness: ×0.25, ×0.50, ×0.75, ×1.00.
2) Manual : if set to Manual , enter the submenu, as shown in the figure
below:

13
Mode: SHUT+AGC;
Shutter: 1/50s~1/100,000s (PAL), 8-level adjustable; 1/60s~1/100,000s
(NTSC), 8-level adjustable. The shutter speed gets faster with the decrease of
value, while the exposure time gets shorter and the video becomes darker. On
the contrary, the shutter speed gets slower with the increase of value, while the
exposure time gets longer and the video becomes brighter.
AGC: 0.00~42.00, 8-level adjustable.
4.3 PICTURE ADJUSTMENT
Press the OSD button to enter the submenu, as shown in the figure below:
PICT ADJUST
MIRROR OFF
BRIGHTNESS 000
CONTRAST 128
SHARPNESS 064
HUE 128
GAIN 128
RETURN

14
4.3.1 MIRROR
Function: to set the image mirror function.
Options: OFF/ON. Default as: OFF.
If enabled, horizontal mirror can be realized.
4.3.2 BRIGHTNESS
Function: to adjust the brightness.
Options: 000-255. The video becomes brighter as the brightness level goes up.
4.3.3 CONTRAST
Function: to adjust the contrast.
Options: 000~255.
4.3.4 SHAPRNESS
Function: to adjust the sharpness.
Options: 000~255. The image becomes clearer along with the increase of
sharpness level.
4.3.5 HUE
Function: to adjust the hue.
Options: 000~255.
4.3.6 GAIN
Function: to adjust the color gain.
Options: 000~255. The color becomes deeper with the increase of gain level.

15
4.4 WHITE BALANCE
Function: to set white balance mode to compensate color temperature, further
rendering the true color of object.
Options: ATW , USER 1 , USER 2 , ANTI CR, MANUAL , PUSH
LOCK.
1) ATW : Auto Tracking White Balance mode. The built-in sensor can
perceive the current color temperature and automatically process the images
with specific arithmetic, so as to render the true color of objects. Press the
OSD button to enter the submenu, as shown in the figure below:
Speed: 000~255.
Delay Count: 000~255.
ATW Frame: ×0.50, ×1.00, ×1.50, ×2.00.
Environment: Indoor/Outdoor.

16
2) USER 1
B-GAIN: to adjust the blue gain. Options: 000~255.
R-GAIN: to adjust the red gain. Options: 000~255.
Notes: Settings under USER 2 is similar to that of USER 1.
3) MANUAL
Manual WB can effectively help render the true color of images when auto
WB fails to do so.
LEVEL: press the L/R button to adjust the level.
4) PUSH LOCK: press the OSD button to lock white balance.
5) ANTI CR: to enable the ANTI CR function.

17
4.5 NR
Press the OSD button to enter the submenu, as shown in the figure below:
Function: to set the noise reduction mode.
Options: Y, C, Y/C, OFF. Y indicates the brightness signal and C indicates the
chroma signal.
4.6 CAMERA ID
Function: to enable/disable camera ID display.
Options: OFF/ON . Default as: OFF.
If set to ON , users can enter the submenu to set the camera ID and the
display position.
CAMERA ID SETUP
INFINOVA
ABCDEFGHIJK L MNOPQRSTUV
WX YZ 0 12 345 67 8 9 —！”#$%&’
() _‵，￥：；<= >?@﹨^*. ×＋/
CHR1 CHR2
CLR POS
RETURN