Infinova V6812IR-H0065SA User manual

V6812IR-H0 Series
HD 1MP and 1.3MP IR IP Minidome Camera
User Manual

Notice
Copyright Statement
This manual may not be reproduced in any form or by any means to create any
derivative such as translation, transformation, or adaptation without the prior
written permission of Infinova.
Infinova reserves the right to change this manual and the specifications without
prior notice. The most recent product specifications and user documentation for
all Infinova products are available on our web site www.infinova.com.
Trademarks
Infinova
® is a trademark of Infinova.
All other trademarks that may appear belong to their respective proprietors.
FCC Warning
The V6812IR-H0 series HD 1.0MP and 1.3MP IR IP minidome cameras comply
with the FCC rules.
Operation is subject to the following two conditions:
This device will not cause harmful interference.
This device must accept any interference received, including interference
that may cause undesired operations.
The V6812IR-H0 series HD 1.0MP and 1.3MP IR IP minidome cameras have
been tested and found to comply with the limits for a Class A digital device,
pursuant to the FCC rules. With these rules and regulations being obeyed to
maintain the good working condition of device, the operation is not supposed to
be affected by the external interruptions under certain circumstances. This
device is electromagnetic, so all the installation and application processing
along the device has to follow strictly to the manual or it may hamper the
telecommunication around. Meanwhile, there is no guarantee that interference
will not occur in a certain particular installation situation.

Read this manual carefully before installation. This manual
should be saved for future use.
Important Safety Instructions and Warnings:
Electronic devices must be kept away from water, fire or high magnetic
radiation.
Clean with a dry cloth.
Provide adequate ventilation.
Unplug the power supply when the device is not to be used for an extended
period of time.
Only use components and parts recommended by manufacturer.
Position power source and related wires to assure to be kept away from
ground and entrance.
Refer to qualified personnel for all service matters.
Save product packaging to ensure availability of proper shipping containers
for future transportation.
Indicate that the un-insulated components within the product may carry a
voltage harmful to humans.
Indicate operations that should be conducted in strict compliance with
instructions and guidelines contained in this manual.
Warning: To avoid risk of fire and electric shock, keep the product away
from rain and moisture!

CONTENTS
Chapter I System Introduction .......................................................................... 1
1.1 Product Description ................................................................................... 1
1.2 Product Features ........................................................................................ 1
1.3 System Requirement.................................................................................. 2
1.4 Product Model ........................................................................................... 3
1.5 Specifications............................................................................................. 4
1.6 Precautions................................................................................................. 6
Chapter II Installation ........................................................................................ 7
Chapter III IE Browser Settings...................................................................... 10
3.1 Equipment Connection ............................................................................ 10
3.2 Software Installation................................................................................ 10
Chapter IV Basic Function Operation ............................................................ 13
4.1 Live View................................................................................................. 13
4.2 System...................................................................................................... 16
4.3 Network Settings ..................................................................................... 22
4.4 Camera Settings....................................................................................... 30
4.5 Video Settings.......................................................................................... 36
4.6 Alarm Settings ......................................................................................... 46
4.7 Account Settings ...................................................................................... 47
4.8 System Log .............................................................................................. 50
Appendix I Magnetic Ring Filter Instruction................................................. 51
Appendix II Questions & Solutions ................................................................. 52
Appendix III Lightning & Surge Protection................................................... 53

1
CHAPTER I SYSTEM INTRODUCTION
1.1 Product Description
V6812IR-H00 & V6812IR-H01 series HD 1MP and 1.3 MP IR IP minidome
camera features 1/3" progressive scan CMOS sensor and built-in 3.0 megapixel
fixed lens (2.8mm/4mm/6mm/8mm/12mm optional). With H.264/M-JPEG
compression format utilized, this camera can output HD full-frame videos with
the resolution of 960P or 720P. The built-in dot matrix IR illuminators allow a
maximum of 20 meters night vision distance (the distance will be different for
different lenses). It’s a perfect solution for a 24x7 around-the-clock
surveillance.
The camera supports the function of strengthening ROI encoding, so as to
improve the image quality of key areas under low-band network environment.
The camera supports three simultaneous video streams. It also provides motion
detection, privacy mask, video mask alarm, image snapshot, local recording,
noise deduction, backlight compensation and WDR functions. Alarm can be
associated with email sending and FTP upload.
Compact structure makes it easy to install. Also, this camera provides 3-axis
adjustment, easy to adjust the monitoring angle.
V6812IR-H00 & V6812IR-H01 series is widely used in normal buildings,
supermarkets, hotels, shops, parks, schools, factories, warehouses, underground
parking lots and other high-resolution surveillance applications.
1.2 Product Features
1/3" progressive scan CMOS sensor
Built-in dot matrix IR illuminators, at 850nm wavelength, up to 20 meters
night vision distance
The illuminator output rate can be automatically adjusted according to the
lighting condition
IR-Cut Removable (ICR) Filter for Day/Night switching
Three Simultaneous Video Streams: Dual H.264 & Scalable M-JPEG

2
With resolution up to 960P or 720P
Smooth videos, with the frame rate up to 30fps
Support Horizontal/Vertical mirror
Support corridor mode
Support WDR function
Backlight Compensation
Local Recording
Up to four ROI (Region of Interest) areas
Up to four definable motion detection areas
Up to four definable privacy mask areas
Support video mask alarm
Alarms triggered by motion detection link with email sending and FTP
upload
Support simultaneous access and parameter setting via Web Server from
multiple clients
Compatible or able to integrate with Infinova V2216 and other digital video
surveillance software
Standard SDK is provided for easy integration with other systems
Onvif Profile S
Compact structure for surface mount, 3-axis adjustment
Support analog video output
12VDC power supply
IP55 environmental rating
1.3 System Requirement
Configuration of the computer to display image and control the camera:
CPU: Intel Pentium 4, 2.4 GHz or above
RAM: 512 MB or greater
Network Port: 100M Ethernet port
Operating System: Microsoft Windows 7, Microsoft Windows XP
IE Browser Version: Microsoft Internet Explorer 6.0 or above

3
1.4 Product Model
This manual is for the following models:
V6812IR-H0065SA HD Megapixel IR IP minidome camera, Day/night, 1/3
inch CMOS sensor, H.264/M-JPEG, indoor, 1.0Mpx,
12VDC, Surface mount, 4mm fixed lens
V6812IR-H0065SB HD Megapixel IR IP minidome camera, Day/night, 1/3
inch CMOS sensor, H.264/M-JPEG, indoor, 1.0Mpx,
12VDC, Surface mount, 6mm fixed lens
V6812IR-H0065SC HD Megapixel IR IP minidome camera, Day/night, 1/3
inch CMOS sensor, H.264/M-JPEG, indoor, 1.0Mpx,
12VDC, Surface mount, 8mm fixed lens
V6812IR-H0065SD HD Megapixel IR IP minidome camera, Day/night, 1/3
inch CMOS sensor, H.264/M-JPEG, indoor, 1.0Mpx,
12VDC, Surface mount, 12mm fixed lens
V6812IR-H0065ST HD Megapixel IR IP minidome camera, Day/night, 1/3
inch CMOS sensor, H.264/M-JPEG, indoor, 1.0Mpx,
12VDC, Surface mount, 2.8mm fixed lens
V6812IR-H0165SA HD Megapixel IR IP minidome camera, Day/night, 1/3
inch CMOS sensor, H.264/M-JPEG, indoor, 1.3Mpx,
12VDC, Surface mount, 4mm fixed lens
V6812IR-H0165SB HD Megapixel IR IP minidome camera, Day/night, 1/3
inch CMOS sensor, H.264/M-JPEG, indoor, 1.3Mpx,
12VDC, Surface mount, 6mm fixed lens
V6812IR-H0165SC HD Megapixel IR IP minidome camera, Day/night, 1/3
inch CMOS sensor, H.264/M-JPEG, indoor, 1.3Mpx,
12VDC, Surface mount, 8mm fixed lens
V6812IR-H0165SD HD Megapixel IR IP minidome camera, Day/night, 1/3
inch CMOS sensor, H.264/M-JPEG, indoor, 1.3Mpx,
12VDC, Surface mount, 12mm fixed lens

4
1.5 Specifications
Model V6812IR-H01 Series V6812IR-H00 Series
Image Sensor 1/3" progressive scan CMOS
Dynamic Range 72.4dB
S/N Ratio 50dB
Lens
F1.6, f=4mm, 6mm, 8mm, 12mm (For
V6812IR-H00&-H01 series)
F1.8, f=2.8mm (For V6812IR-H00 series)
Night Vision
Distance 20m (Max)
Camera Angle
Adjustment
X (Panning): 0°~360°; Y (Tilting): -75°~75°;
Z (Rotating): 0°~360°
Day/Night
Functionality ICR
Sensitivity 0lux (IR on)
Exposure Scene mode, Manual mode, Shutter priority mode
Shutter Auto/Manual (1/30s~1/8000s)
White Balance Auto/Manual/Incandescent light/Cool white
fluorescent light/Sun light/Cloudy/Natrium light
WDR Available
Gain Control Auto/Manual (maximum: 64X)
Noise Reduction 3D
Mirror Horizontal/Vertical
Corridor Mode Available
Picture Adjustment Brightness, sharpness, hue, contrast, saturation
adjustable
Video Compression H.264 main profile/M-JPEG

5
Maximum
Resolution
1280×960@H.264/
M-JPEG
1280×720@H.264/
M-JPEG
Optional Resolution
Major stream:
1280×960, 1280×720;
Minor stream:
640×480, 320×240
Major stream: 1280×720;
Minor stream:
640×480, 320×240
Maximum Frame
Rate 30fps@1280×960 30fps@1280×720
Data Rate
Variable bit rate;
Constant bit rate:
Major stream: 256Kbps~10000Kbps;
Minor stream: 256Kbps~2000Kbps
Motion Detection Up to 4 areas
Privacy Mask Up to 4 masks
ROI Up to 4 regions
Network Delay ≤180ms
Local Recording Available
Upgrade Online Available
Password
Protection Available
Network Port One RJ45 10/100M self-adaptive Ethernet port
Analog Video
Output Available via BNC port
Applicable
Protocols
IPv4, IPv6, TCP, UDP, IGMP, DHCP, FTP, SNMP
(V3), SMTP, NTP, RTP, RTSP, RTCP, HTTP, HTTPS,
TSL, SSL, 802.1X, Qos, PPPoE, DNS, DDNS, ARP,
ICMP, UPnP
Power Supply 12VDC
Power
Consumption ＜5W

6
Operating
Temperature 14°F~122°F (-10°C~+50°C)
Storage
Temperature -4° F ~ 140° F (-20° C ~ 60° C)
Operating
Humidity 0%-90% RH (non-condensing)
Dimensions (H×Ø) 3.34"×Φ4.71" (84.7mm×Φ119.5mm)
Box Dimensions
(L×W×H) 6.65 "×6.65 "×5.79" (169mm×169mm×147mm)
Unit Weight 1.43lbs. (0.65kg)
Shipping Weight 1.83lbs. (0.83kg)
1.6 Precautions
1. Do not drop the camera or subject it to strong knock.
2. Do not point the camera lens toward the sun or other strong light.
3. Do not install the camera in environment with temperature beyond the
acceptable range (from -10°C to 50°C).
4. Never let liquid of any kind flow into this unit.
5. Do not directly touch the CMOS element. If it is necessary to clean the
element, use a soft cloth moistened with alcohol to wipe off the dust.
6. If any abnormality occurs, make sure to unplug the unit and contact your
local dealer.
7. This camera features AGC circuit, so when the camera is applied under
low illumination, sensitivity will enhance automatically, making images
look rough, which is normal.
8. The camera power supply is 12VDC. Be sure of the +/- terminal correct.
9. Firstly perform network settings after login. Gateway IP address should be
set to the IP address of the gateway that the device connects to.
10.The IP address is not allowed to conflict with that of other devices;
otherwise, you cannot visit the camera.

7
CHAPTER II INSTALLATION
Step 1: Prepare mounting holes
Attach the enclosed mounting schematic label on the desired position of wall
or ceiling; drill holes according to the label’s instruction (4 mounting holes
and 1 cable hole).
Figure 2-1
Step 2: Install camera base
Unscrew the base and take it off. Install the base to the ceiling via the 4
mounting holes.
Figure 2-2

8
Step 3: Pre-fasten minidome camera
Install tightening ring, chuck ring and dome module to the base. Keep tightening
ring loose, so that the dome module can turn freely.
Tightening ring
Chuckring
Dome module
Figure 2-3
Step 4: Adjust dome module
1. Turn the dome module to make it point to surveillance area. The
camera features X, Y, Z 3-axis adjustment. It allows 0°~360° panning
adjustment, -75°~75° tilting adjustment and 0°~360° rotating
adjustment.
2. Adjust the lens according to the schematic label; make sure
photosensitive resistance lies at the bottom; then fasten tightening ring.
Photosensitive resistance
Keep the arrowhead up
when mounting.
Figure 2-4

9
Dimensions (Unit: inch, in the parentheses is mm)
Ø4.71(119.5)
Figure 2-5

10
CHAPTER III IE BROWSER SETTINGS
When view the video, the user need to adjust the IE browser of the monitor or
other video devices, and set proper system function based on the following
instructions:
Support IE browser version: Internet Explorer 6.0 or above;
Must install InfiPlayerAX control and equip with Directx 9.0c.
3.1 Equipment Connection
V6812IR-H0 series IP camera can be directly connected to a computer, or
connected to a network.
Note: Check whether the connection is tight or not before power-on.
3.2 Software Installation
The installation procedures of V6812IR-H0 series camera image software are
listed as follows:
(1) Login
First, start IE browser and enter IP address. Enter user name and password in
the pop-up login interface.
The default IP address is http://192.168.1.100; the default subnet mask is
255.255.255.0 and the default gateway IP address is 192.168.1.254. For normal
access, correctly set local IP parameters before system login.
Do log in the system with the default super user for the first time to run the
software. The default Super User is admin (password: admin).
Note: Do change the password in time to secure your system.
(2) Install control
There are two ways to install control.
Method 1:
The prompt message as below will come out in live view window after a

11
successful login. Click the link to run, or store the exe file, then run it.
Figure 3-1
If the installation fails, check whether there is video viewed through other IE
window or page. You should close the video or the IE window directly.
If it successes, click refresh, you can view the live video.
Method 2:
The prompt message as below will come out in the page after a successful
login. Right click “Add-on Disabled” and select “Run Add-on”.
Figure 3-2
Then the prompt of security warning will pop up to remind the user to install
InfiPlayerAX control. Click “Install”.
Figure 3-3
After InfiPlayerAX control is installed, you can view the live video. If it pops
up reboot prompt, please cancel reboot. Then close all the IE window and
install InfiPlayerAX control once again. The live video will display as below:

12
Figure 3-4
Note:
If InfiPlayerAX control installation falls, the live video won’t display. Then,
you should change the IE security level.
1. Select “Tool” in the menu bar, and then select “Internet Options” from the
drop-down menu.
2. Select “Security” in the pop-up Internet options.
3. Click “Internet” icon and then click “Custom Level”.
4. Select “Enable” or “Prompt” in the options of “Download unsigned ActiveX
controls”.
5. Click Privacy in the “Internet”, clear “Block pop-ups”, then redraw the
screen and install control as per the prompt. The live video will display.
By now, the IE browser setting for image view comes to an end.

13
CHAPTER IV BASIC FUNCTION OPERATION
This chapter mainly introduces the settings and operation of V6812IR-H0
series.
4.1 Live View
Start IE browser after the server is powered on for about 90 seconds, and then
enter IP address, such as http://192.168.1.100 (default), in the address field.
Note: The default subnet mask is 255.255.255.0 and the default gateway IP
address is 192.168.1.254. For normal access, please correctly set local IP
parameters before system login.
The login interface is displayed as shown in figure below in English operating
system.
Figure 4-1 User Login
Do log in the system with the default super user for the first time to run the
software. The default Super User is admin (password: admin). Input the correct
user name and password and then click “OK” button to log.
Note: Please change the password of supper users to ensure system security,
refer to Section 4.7 for details.

14
After login is successful, the following interface will display:
Figure 4-2 H.264 Live view
V6812IR-H0 series IP camera supports H.264 and M-JPEG video
compression formats. After successful login, it enters H.264 major stream live
video interface.
Stream Type: Users can also select H.264 minor stream or MJPEG from the
dropdown list of stream type. In the H.264 major or minor stream type, users
can do recording, snap shooting, and set motion detection and privacy mask
switches.
Video Size: Over browsing videos, users can also select a proper video scale.
Play mode: live or fluid for option.
Corridor mode: when the mode is enabled, the horizontal angle narrows
down, while the vertical angle stretches, shown as the figure 4-3.

15
Figure 4-3
Click the button to snapshoot and to enter the storage path. Default:
C:\InfiPlayerAX\Picture.
V6812IR-H0 series supports local recording. Click the recording button
to start recording; when the button changes to , click it to stop recording.
During local recording, “REC” appears on the video screen. Click the button
to enter the recording storage path. Default: C:\InfiPlayerAX\ Video.
Users can set the snap shooting and recording storage path in the video
settings interface.
Indicate that the motion detection and privacy mask functions are
disabled. Click the buttons to enable them and then the buttons will be shown
as .
Note: only when motion detection or privacy mask is enabled, you can set the
corresponding function in Video Settings, refer to Section 4.5.3 or 4.5.4 for
details.
Note: the login web page language should be set to the same as that of PC’s
operating system.

16
Click the option tab “Setting” to enter the system setting interface.
Figure 4-4 Settings Interface
With the help of navigation menu on the left, Super user can perform the
following operations: Basic Information View, Time Settings and Advanced
Settings, Network Settings, Camera Settings (including Basic Set, Exposure Set,
Effect Set, White Balance, IR set, Reset), Video Settings, Alarm Settings,
Account Settings (Add/Delete User, Change Password), Log, etc.
Note: The following instructions are used for the super user.
4.2 System
Click the navigation bar “System” and it displays the following three option
tabs: System, Time and Advanced, as shown in Figure 4-3.
4.2.1 System Information
The initial interface of System Settings displays related system information,
such as basic system information, network settings, NTP settings, alarm settings,
H.264/MJPEG video settings, etc.