infobit iTrans USB3-TR100 User manual

INFOBIT AV www.infobitav.com [email protected]
iTrans USB3-TR100
USB 3.0 Extender (100M)
User Manual V1.2
Thank you for purchasing this product
For optimum performance and safety, please read these instructions carefully before
connecting, operating, or adjusting this product. Please keep this manual for future
reference.
Surge protection device recommended
This product contains sensitive electrical components that may be damaged by electrical
spikes, surges, electric shock, lighting strikes, etc. Use of surge protection systems is
highly recommended to protect and extend the life of your equipment.
Caution
The product requires the use of UTP connectors. Please connect in direct
interconnection method and do not cross connect.

INFOBIT AV www.infobitav.com [email protected]
1
White and Orange
2
Orange
3
White and Green
4
Blue
5
White and Blue
6
Green
7
White and Brown
8
Brown
Direct Interconnection Method
1. Introduction
The USB 3.0 Extender can extend USB signal to a distance up to 100m/328ft via a single
CAT6a cable. Transmitter features with one USB 3.0 Type B input, one FSYSNC GPIO input
and one RS-232 pass-through. Receiver features with four USB 3.0 Type A outputs, one
FSYSNC GPIO output and one RS-232 pass-through. Bi-directional 24V PoC is also supported.
The product can be widely used for long distance signal transmission between a PC and USB
devices.
2. Features
☆ Extension of USB 3.0 up to 100m/328ft over CAT6a cable
☆ USB 3.0 connectivity with data transfer rate up to 5Gbps
☆ Backwards compatible with USB 2.0 and 1.1
☆ Hardware acceleration for isochronous and bulk transfer
☆ USB-A port 1 & 2 support 5V/1.5A, port 3 & 4 support 5V/1A
☆ Support RS-232 pass-through and FSYNC GPIO pass-through (for industry camera use)
☆ Support bi-directional 24V PoC
☆ Support HDBaseT 3.0
☆ Simple plug and play, no driver and setting installation required
3. Package Contents
① 1× USB 3.0 Extender (Transmitter)
② 1× USB 3.0 Extender (Receiver)
③ 1× 24V/2A Locking Power Supply
④ 2× 4pin-3.5mm Phoenix Connector (Male)

INFOBIT AV www.infobitav.com [email protected]
⑤ 4× Mounting Ear
⑥ 8× Machine Screw (KM3*4)
⑦ 1× User Manual
4. Spec
Model
iTrans USB3-TR100
Name
USB 3.0 Extender (100M)
USB Protocol
USB 3.0
Transmission Rate
Up to 5Gbps
Network Bandwidth
10G
Transmission
Distance
100m/328ft over CAT6a (F/FTP) cable
Transmitter
Input: 1 × USB HOST [USB-B, 9pin Female]
Output: 1 × HDBT OUT [RJ45, Female]
Control:
1 × RS-232 [3pin-3.5mm Phoenix Connector]
1 × FSYNC [1pin-3.5mm Phoenix Connector]
1 × SERVICE [USB-C, Update Port]
Receiver
Input: 1 × HDBT IN [RJ45, Female]
Output: 4 × USB Devices [USB-A, 9pin Female]
Control:
1 × RS-232 [3pin-3.5mm Phoenix Connector]
1 × FSYNC [1pin-3.5mm Phoenix Connector]
1 × SERVICE [USB-C, Update Port]
Housing
Metal Enclosure
Color
Black
Dimensions
Transmitter / Receiver: 85mm [W] × 100mm [D] × 25.5mm [H]
Weight
Transmitter: 253g, Receiver: 260g
Power Supply
Input: AC 100~240V 50/60Hz Output: DC 24V/2A
Power Consumption
PoC Power Supply: 40W (Max)
Operating
Temperature
0°C ~ 40°C / 32°F ~ 104°F
Storage
Temperature
-20°C ~ 60°C / -4°F ~ 140°F
Relative Humidity
20~90% RH (non-condensing)
5.1. Transmitter

INFOBIT AV www.infobitav.com [email protected]
No.
Name
Function Description
1
USB HOST
Host port, supporting USB 3.0. Connects to a PC or host.
2
USB LED
USB signal indicator.
▪ On: USB signal is detected.
▪ Off: USB signal is not detected.
3
HDBT OUT
Connects to the HDBT IN port on Receiver with CAT cable.
4
LINK LED
Connection signal indicator.
▪ On: Transmitter and Receiver are connected and linked.
▪ Flashing: Transmitter and Receiver link is off due to USB low power
mode.
▪ Off: Transmitter and Receiver are not connected.
5
RS-232
3pin phoenix connector, connected to a PC or control system for RS-
232 command pass-through.
6
FSYNC
FSYNC port, used for level pass-through to the Receiver, and
synchronizing the external devices. The default level is 3.3V.
7
SERVICE
Firmware update port.
8
POWER
LED
The LED will be on when the Transmitter is powered on.
9
DC 24V
DC 24V/2A power input port.
5.2. Receiver

INFOBIT AV www.infobitav.com [email protected]
No.
Name
Function Description
1
USB 1/2
Connect to USB devices, and max output power is up to 5V/1.5A.
2
USB 3/4
Connect to USB devices, and max output power is up to 5V/1A.
3
USB LED
USB signal indicator.
▪ On: USB signal is detected.
▪ Off: USB signal is not detected.
4
HDBT IN
Connects to the HDBT OUT port on Transmitter with CAT cable.
5
LINK LED
Connection signal indicator.
▪ On: Transmitter and Receiver are connected and linked.
▪ Flashing: Transmitter and Receiver link is off due to USB low
power mode.
▪ Off: Transmitter and Receiver are not connected.
6
RS-232
3pin phoenix connector, connected to a PC or control system for
RS-232 command pass-through.
7
FSYNC
FSYNC port, receiving level pass-through from the Transmitter, and
synchronizing the external devices. Default level is 3.3V.
8
SERVICE
Firmware update port.
9
POWER LED
The LED will be on when the Receiver is powered on.
10
DC 24V
DC 24V/2A power input port.
6. Diagram

INFOBIT AV www.infobitav.com [email protected]