Infopia LipidPro User manual

User Manual
INFL01A
IMM20-360 Rev.2011-09-02
Lancet: SAE HAN Med Corp.
Bd. General Washis 53
1030 Brussels, BELGIUM
Tel: +(32) 2. 732.59.54
Fax: +(32) 2.732.60.03
E-Mail : [e-mail]
Lancing Device: GMMC

• 03 •
Dear LipidProTM lipid profile and glucose measuring
system Owner
Thank you for your choosing the LipidProTM lipid profile and glucose
measuring system. This instruction for use includes important informa-
tion you need to know about the LipidProTM lipid profile and glucose
measuring system. Please read it carefully.
Our goal for LipidProTM lipid profile and glucose measuring system is
attributed to provide the best quality healthcare products coupled with
superior customer service.
Intended For Use
The LipidProTM lipid profile and glucose measuring system is intended for
selftesting and for outside the body (in vitro diagnostic use only). It should
be used for testing lipid profileand monitoring glucose level in a sample.
The lipid profile includes total cholesterol, HDL-cholesterol (often called
good cholesterol), LDL-cholesterol (often called bad cholesterol) and
triglycerides.
Additionally, LipidProTM glucose test is plasma-calibrated to allow
comparison of results with the laboratory method.
This meter is available in two types of strips: one type of strips is measur-
ing glucose level by the method of electrochemistry and the other is
testing lipid profile by the spectroscopy method.

• 04 • • 05 •
How to use Instructions For Use
This guide includes all the information you need to use LipidProTM for self-testing
use. For additional information and specific information for each individual test,
please make sure you read the strip instructions for use included with the test
strips.
If you need help interpreting the test results, please contact the local representa-
tive. Customer Service assistance is available 09:00 AM - 06:00 PM, Monday-
through Friday.
For questions or assistance with LipidProTM call :
infopia Customer Service
Hours : 09:00 AM - 06:00 PM
Monday - Friday
Tel. [phone]
Fax. [phone]
Email : [email protected]
Test Principle
LipidProTM lipid profile and glucose measuring system has two kinds of test
principle according to test items: one for blood glucose and the other for lipid
profile.
Lipid profile test result is based on a reading of reflection density. When the blood
is applied, the color changes in test area through an enzyme reaction.
The meter records, this change in color and converts of measurement signal
displayed the results by using the data previously entered the code of via. The
deeper color is, the higher lipid level is.
Glucose in the blood sample will react to the electrodes in the glucose test strip,
generating an electrical current that will stimulate a chemical reaction. This
reaction is measured by LipidProTM meter and displayed as your blood glucose
result.

• 06 • • 07 •
LipidProTM Testing system Kit Contents
1. LipidProTM Meter
2. User manual
3. Warranty Card
4. Carrying Case
Your LipidProTM testing system has been sealed to protect the contents.
If you find your seal has been broken, please return it to the place of
purchase.
Required but not provided
- LipidProTM Brand Test Strips
- LipidProTM Brand Control Solutions
- LipidProTM Capillary Rods
Contents
1. Learning the System
LipidProTM Testing System Kit Contents ----------------------------------- 7
LipidProTM Testing Meter ------------------------------------------------------ 8
LipidProTM Testing Meter Display ------------------------------------------- 9
LipidProTM Test Strip Information ---------------------------------------10-15
2. Setting Your Meter
Battery Use ---------------------------------------------------------------------16
Setting Mode ---------------------------------------------------------------17-18
3. Before Testing
Coding the Meter ---------------------------------------------------------19-21
Checking the System with Control Solution -------------------------22-26
4. Testing Your Blood
Instructions for lancing device ------------------------------------------27-29
Testing Your Blood---------------------------------------------------------30-32
Quick reference of test procedure--------------------------------------33-34
Test Procedure -------------------------------------------------------------35-42
Glucose test strip Discard Function----------------------------------------43
Alternate site testing at glucose measuring------------------------------44
Performing a Blood Test using an Alternate Site------------------------45
5. Reviewing Your Results ------------------------------------------------46-47
6. Deleting your Results ------------------------------------------------------ 48
7. LipidProTM Software and Thermal Printer -----------------------------49
8. Cleaning Your Meter and Maintenance --------------------------------50
9. Troubleshooting ---------------------------------------------------------51-53
10. Product Specifications------------------------------------------------54-56
11. Warranty -----------------------------------------------------------------------57
12. Symbol reference -----------------------------------------------------------58
5. Two AAA batteries
6. Lancing Device
7. Lancet
8. Log Book
1>,
meter Carrying Case
Lancet(1pack)
0434
Lancing Device

• 08 • • 09 •
LipidProTM Testing Meter Display
Caution
1. Do not use LipidProTM meter in a dry environment, especially if synthetic materials are
present. Synthetic clothes, carpets, etc., may cause damaging static discharges in a
dry environment.
2. Do not use LipidProTM meter near cellular or cordless telephones, walkie talkies,
garage door openers, radio transmitters, or other electronic or electrical equipment
that are sources of electromagnetic radiation, as these may interfere with the proper
operation of the meter.
Glucose Test Strip Port
lnsert the glucose test strip
Glucose test Strip Ejector
Strip discard function by pushing toward outside
LCD Screen
Display measurement level of glucose, TC, HDL, TG and
LDL including time and message
Up (▲) button
Button for memory mode and choice of function in each
mode.
Down (▼) button
Button for choice of function in each mode & RFID()
operation button & Printer operation button.
Mode ( ) button
Setting mode, Cholesterol measurement mode, On and
off button.
RFID ( ) Printing part
Part for placing the RFID-tag on the strip bottle
Lipid profile Testing part
Lipid profile test strip inserting part
Buzzer sound print part
Printing part for Warning sound, Fixed sound and buzzer
sound
Battery Cover
Purpose for Battery replacement and fixed cover
Blood Glucose
Total cholesterol
Triglyceride
HDL-cholesterol
LDL-cholesterol
Blood insertion for glucose test
Blood insertion for lipid profile test
Serum
Sample blood
Displaying code number of Test Strips
Low batteries
Alarm
Testing unit
Temperature & date of test
Hour & Date of test
Average Test Results(only for glucose)
Control Solution Symbol
Day & Month
Yea r
TC
HDL
TG
MEM

• 10 • • 11 •
LipidProTM Test Strip Information
LipidProTM Test Strip Information
Target to apply blood
Ribs that guide the
strip into the meter
Total Cholesterol
test area
HDL-Cholesterol
test area
Triglyceride
test area
This test strip is for glucose.
color-coding label
This test strip colored black enables to test
TC, HDL, TG and calculated LDL.
This test strip colored red is for Total
Cholesterol.
This test strip colored blue is for HDL-
Cholesterol.
This test strip colored green is for
Triglyceride.
The part for holding
strip
Confirmation
Window
Contact Bar
Front -
Back -
Front -
Back -
Front -
Back -
Front -
Back -
Front -
Back -
1. Lipid Profile test strip
Use only LipidProTM Test Strips with your LipidProTM meter. 5. Glucose test strip
2. Total Cholesterol test strip
3. HDL-Cholesterol test strip
4. Triglyceride test strip
Caution
1. Store the LipidProTM test strip vials in a cool and dry place. Keep out of direct
sunlight. Do not freeze.
2. Store test strips in their original vial only. Do not mix the test strips in new vials or in
any other container.
3. Immediately replace the vial cap and close tightly after picking out the
LipidProTM test strip.
4. Make a note of the discard date which is three months from the date you first open
a new vial of strips. Do not use LipidPro™ test strip and vial after the discard date.
5. Avoid getting dirt, food, and water on the test strip. Do not handle test strips with
wet hands.
6. Do not use the test strips after the expiry date printed on the package or vial since it
may cause inaccurate results.
7. Do not bend, cut, or alter the test strip.
8. LipidPro™ test strips are for single use only. Do not re-use.
9. Do not test at the following temperature condition:
- Lipid Profile strip : below 18℃(64℉) or above 30℃(86℉).
- glucose strip : below 10℃(50℉) or above 40℃(104℉)
10. Do not test with humidity below 10% or above 90%.
11. Refer to additional information in the LipidProTM test strip package.
12. Avoid getting dirt, food, and water on the color-coding label (backside of glucose
test strip).
13. Discard the used test strips carefully according to the local regulations.
Blood application and
Test area

• 15 •
Accuracy:
The accuracy results obtained with the LipidPro
TM
lipid profile and glucose
measuring system were compared to glucose results obtained with the Hitachi
meter 747, a laboratory instrument. Glucose levels were measured on 160
patients at three different clinical centers.
System accuracy results for glucose concentration <75 mg/dL (4.2 mmol/L)
System accuracy results for glucose concentration ≥ 75 mg/dL(4.2 mmol/L)
Precision:
Precision Results for venous blood samples.
Within ± 5mg/dL
(within ± 0.28 mmol/L)
20/28(71%)
Within ± 10mg/dL
(within ± 0.56 mmol/L)
26/28 (93%)
Within ± 15mg/dL
(within ± 0.83 mmol/L)
28/28 (100 %)
Within ± 5mg/dL
76/132(58%)
Within ± 10mg/dL
111/132(84%)
Within ± 15mg/dL
128/132 (97%)
Within ± 20mg/dL
132/132(100%)
Mean (mg/dL)
CV (%)
40
3.7
81
2.7
135
3.1
233
3.3
350
1.8
Precision Results for control solutions.
Mean (mg/dL)
CV (%)
47
3.3
106
3.1
307
3.1
• 12 • • 13 •
LipidProTM Test Strip Information
1-1. Total Cholesterol
LIMITATIONS OF SYSTEM (for lipid profile test):
Lipid Profile Test Strips provide accurate results when the following constraints are
observed:
• Do not use neonate samples
Please note the following interferences that may affect the results:
• Extremes in hematocrit may affect test results. Hematocrit levels less than 30 % may
cause falsely high reading and hematocrit levels greater than 55 % may cause
falsely low reading.
• Interferences: Acetaminophen, uric acid, ascorbic acid (vitamin C), and other
reducing substances (when occurring in normal blood or normal therapeutic concen-
trations) do not significantly affect results. However, abnormally high concentrations
in blood may cause inaccurately high results.
• Only EDTA and Heparin containing tubes are recommended as an anticoagulant
tube.
• Total cholesterol may be decreased by dopamine and gentisic acid.
• HDL-cholesterol may be decreased by dopamine.
• Triglyceride may be decreased by dopamine and Methyldopa.
Performance Characteristics:
The performance of the lipid profile test strips has been evaluated in laboratory and in
clinical tests (Please refer to strip instructions for use for more details).
Testing Range: The test range of LipidPro
TM
is 100 ~ 400 mg/dL (2.59-10.36mmol/L)
for total cholesterol, 25~80mg/dL (0.65-2.08mmol/L) for HDL-cholesterol and
70~600 mg/dL (0.80-6.86mmol/L) for Triglyceride.
Accuracy
Sample Type
Capillary
Regression line
Y=0.9871x+2.2856
slope
0.9871
y-interceptor
2.2856
R2
0.9842
Regression line
Y=0.9732x+1.4038
slope
0.9732
y-interceptor
1.4038
R2
0.9656
Regression line
Y=0.9975x+1.3080
slope
0.9975
y-interceptor
1.3080
R2
0.9816
2-1. Total cholesterol
Mean Conc (mg/dL)
SD (mg/dL)
CV (%)
178.6
8.4
4.7
271.5
10.4
3.8
2-2. HDL-cholesterol
Mean Conc (mg/dL)
SD (mg/dL)
CV (%)
49.8
3.0
5.9
25.2
1.6
6.3
2-3. Triglyceride
Mean Conc (mg/dL)
SD (mg/dL)
CV (%)
120.8
5.3
4.4
267.4
10.2
3.8
2-1. Total cholesterol
Mean Conc (mg/dL)
SD (mg/dL)
CV (%)
150.3
2.2
1.5
250.6
3.6
1.4
2-2. HDL-cholesterol
Mean Conc (mg/dL)
SD (mg/dL)
CV (%)
60.1
2.1
3.5
30.0
1.4
4.7
2-3. Triglyceride
Mean Conc (mg/dL)
SD (mg/dL)
CV (%)
120.5
2.9
2.4
250.5
2.8
1.4
1-2. HDL-Cholesterol
Sample Type
Capillary
1-3. Triglyceride
Sample Type
Capillary
Regression line
Y=0.9257x+8.4998
slope
0.9257
y-interceptor
8.4998
R2
0.8815
1-4. LDL-Cholesterol
Precision
- Precision Results for Human Serum samples tested for 20 days.
- Precision Results for Control Solutions.
Sample Type
Capillary

• 14 • • 15 •
LipidProTM Test Strip Information
LIMITATIONS OF SYSTEM (for Glucose test):
The LipidPro
TM
Glucose Test Strips provide accurate results when the following
constraints are observed:
• Do not use neonate samples.
• Inaccurate results may occur when in shock, hypotensive, hyperglycemic, or
hyperosmolar state, with or without ketosis.
• Glucose test strips used above altitudes of 10,000 feet will have an effect on
test results.
Please note the following interferences that may affect test results:
• Extremes in hematocrit may affect test results. Hematocrit levels less than 20
% may cause falsely high reading. Hematocrit levels greater than 60 % may
cause falsely low readings.
• Interferences: Acetaminophen, Uric and, Ascorbic acid (Vitamin C), and other
reducing substances when occurring in normal blood or normal therapeutic
concentrations do not significantly affect results. However, abnormally high
concentrations may cause inaccurately high results.
• Lipemic samples; Cholesterol up to 500 mg/dL or triglyceride up to 3000mg/dl
do not significantly affect the results. Values beyond these levels should be
interpreted with caution.
• Blood samples that contain a high concentration of dissolved oxygen may
lower the test result.
• EDTA containing tube is recommended as an anticoagulant tube.
Performance Characteristics:
The performance of the glucose test strips has been evaluated in laboratory and
in clinical tests (Please refer to strip instructions for use for more details).
Measurement Range: The measurement range of the LipidPro
TM
Glucose
Testing is 10 to 600 mg/dL (0.6-33.3mmol/L).
Accuracy:
The accuracy results obtained with the LipidPro
TM
lipid profile and glucose
measuring system were compared to glucose results obtained with the Hitachi
meter 747, a laboratory instrument. Glucose levels were measured on 160
patients at three different clinical centers.
System accuracy results for glucose concentration <75 mg/dL (4.2 mmol/L)
System accuracy results for glucose concentration ≥ 75 mg/dL(4.2 mmol/L)
Precision:
Precision Results for venous blood samples.
Within ± 5mg/dL
(within ± 0.28 mmol/L)
20/28(71%)
Within ± 10mg/dL
(within ± 0.56 mmol/L)
26/28 (93%)
Within ± 15mg/dL
(within ± 0.83 mmol/L)
28/28 (100 %)
Within ± 5mg/dL
76/132(58%)
Within ± 10mg/dL
111/132(84%)
Within ± 15mg/dL
128/132 (97%)
Within ± 20mg/dL
132/132(100%)
Mean (mg/dL)
CV (%)
40
3.7
81
2.7
135
3.1
233
3.3
350
1.8
Precision Results for control solutions.
Mean (mg/dL)
CV (%)
47
3.3
106
3.1
307
3.1

• 16 • • 17 •
Setting Your Meter
Battery Use
The LipidPro
TM
requires two(2) AAA 1.5 volt alkaline batteries.
When to replace the batteries:
The meter will give you an indication on the display that the batteries need to be
changed. When the display reads battery sign, no more tests can be run until
the batteries are changed. Always replace the batteries with high quality alkaline
batteries. It is recommended to keep a spare set of batteries on hand. To extend
battery life, remove the Test Strip as soon as a result is displayed.
How to install /replace the batteries:
1. Open the battery cover on the back of the LipidPro
TM
.
2. Remove old batteries from the compartment and safely discard.
3. Insert the new batteries into the battery compartment as marked on the
inside compartment.
4. Replace the battery cover. To make sure the batteries were installed
correctly, push either one of the two buttons on the front of the meter to turn
the LipidPro
TM
on.
<Follow Action>
1. Check your meter with the control solution.
2. Perform your test again.
Setting Your Meter
Setting Mode
It is recommended to set your LipidPro
TM
meter properly before using.
The meter enters setting mode with a beep sound
by pressing the mode ( ) button for 3 or more
seconds in the stand-by status. Press Mode ( )
button for the next step.
Caution
Remove both batteries from the battery compartment and dispose of them according to
your institution's guidelines.
Caution
Make sure that the date and time are set properly to enable your data to be stored and
downloaded properly.
By pressing Up( ▲) or Down ( ▼) button, adjust
year and press Mode ( ) button.
By pressing UP( ▲) or Down ( ▼) button, adjust
date, month and time, and then press Mode ( )
button.

• 18 • • 19 •
Setting Your Meter Before Testing - Coding Your Meter
LipidPro
TM
has two coding systems:
Lipid Profile test - Each vial of test strip has RFID-tag which enables the meter to
recognize its code number automatically.
Glucose test - Each test strip has color coding label on the back of the strip which
enables the meter to recognize its code number automatically.
Caution
The radiation of RFID ( ) recognition is within 2 cm.
The meter will be back to stand-by status if there is no operation within 5 seconds.
Press RFID (▼) button for 3 or more seconds.
Place the RFID-tag on the strip bottle to the area
of the RFID symbol ( ) on the meter.
Coding for Lipid Profile test
By pressing Up(▲) or
Down(▼) button, select testing
unit and press Mode ( )
button.
By pressing Up(▲) or Down(▼
) button, select temperature
unit and press Mode ( )
button.
By pressing Up(▲) or Down(▼) button, select average
date and press Mode ( ) button.
By pressing Up(▲) or Down(▼) button, select Alarm
ON/OFF and press Mode ( ) button.
If you select Alarm ON, you can set the time by pressing
Up(▲) or Down(▼) button, and press Mode ( )
button(you can set 2 alarms).
By Pressing ▲▼, select print ON/OFF and press
Mode( ). If you select ‘ON’ and press Mode( )
button to active it. If you select print, this setting mode is
completed.
Note : This average date is applied to glucose
testing only.

• 20 • • 21 •
Before Testing - Coding Your Meter Before Testing - Coding the Meter
• Coding for Glucose test
Caution
1. If the code is not displayed after 3 seconds, pull the test strip out of the port and re-
start the procedure from the beginning.
2. If the codes on the display and that on the test vial do not match, try another new strip.
If the mismatch persists, please contact your local representative for help.
3. If the meter does not power on, pull the test strip out of the port and re-insert the test
strip.
4. Avoid testing under direct sunlight, for a more accurate test result.
5. If you apply your sample too early, error message will appear on the display(refer to
page 50 ).
1.
Once it recognizes the code number, the meter
displays the code value for 2 seconds and return
to the stand-by status.
Make sure the code number matches the code on
the strip vial.
Firmly insert the glucose test strip into the
test port of LipidPro
TM
meter, and then the
power will automatically turn on with the
code number, temperature and time.
2. Make sure the code number on the display
of the meter correspond with that on the
test strip vial. The color coding label of the
back on the test strip automatically
indicates the code number in this system.
1504
C20

• 22 • • 23 •
Checking the system with control solution Checking the system with control solution
Caution
Please check the expiry date on the instructions for use provided with each
control solution.
Total Cholesterol strip or Lipid profile test strip in Total Cholesterol test area
should be used only Total Cholesterol control level 1, level 2. HDL Choles-
terol strip or Lipid profile test strip in HDL Cholesterol test area should be
used only HDL Cholesterol control level 1, level 2.
Triglyceride strip or Lipid profile test strip in triglyceride test area should be
used only triglyceride control level 1, level 2.
Glucose test strip should be used only glucose control solution Low, Normal
and High.
It is recommended that the control solution is stored at room temperature
before testing.
Quality control by control solution
Control testing, also known as quality control testing, is used to ensure all the
parts of the test system are working properly together and the test results are
accurate and reliable within the limits of the system. Contact customer support of
local representative.
The users should follow their facility's policies on when controls should be tested
(for example: with each new Test strip lot; monthly as a continued check on
storage conditions;whenever issues (storage,operator,or other) are identified or
there are questions about the results).
The control solution should be used
• Whenever you suspect the meter or test strip is not functioning properly.
• If your blood glucose test results are not consistent with your symptoms or if
you think they are not accurate.
• If you have dropped the meter
• For quality control at the point of care
• For teaching or learning the system
Note:
The LipidPro
TM
Control Solutions are sold separately.
The TC(Level 1, Level 2), TG(Level 1, Level 2) and HDL (Level 1, Level 2) control
solutions can be obtained.
Caution
The radiation of RFID ( ) recognition is within 2cm.
The meter will revert back to stand-by status if there is no operation within 5 seconds.
• Lipid Profile test
Testing procedure
1. Press RFID(▼) button for 3 or more seconds.
2. Place the RFID-tag on the strip vial to the
area of the RFID symbol ( ) on the meter.

• 24 • • 25 •
Checking the system with control solution Checking the system with control solution
• Glucose test
Testing procedure
1. Shake the control solution before use.
2. Discard the 1st drop of control solution, this will
eliminate any residue.
3. Place a drop of control solution on a clean, dry
surface(ex. The lid of the test strip vial).
4. Insert a test strip into the port firmly and press
Up(▲) button. The symbol of control solution
( ) will appear on the display of meter. This
will allow you to differentiate between a control
solution test and an actual blood test for future
reference.
5. Apply the test strip to the control solution.
3. Check the code number on the display of the meter with
that on the strip vial.
4. Insert the test strip and press Mode( ) button.
Press Up( ▲) button and the meter displays the symbol of
control solution( ).
5. In 5 seconds the symbol of sample blood is blinking.
6. Place a drop of solution on a clean, dry
surface (for example: the lid of your test
strip vial).
7. Apply the prepared control solution to the
test strip by using capillary rod.
8. Apply the control solution to the test area.
Caution : If you want to test all three test items (TC, HDL
and TG), please collect the control solution with
each capillary rod.
Caution : Whenever you change the test strip vial,
Please follow the code recognition procedure.
9. The test results will be displayed in about 2 minutes.
1504

• 26 • • 27 •
Checking the system with control solution
6. Results appear in 3 seconds. Compare the
result to the range printed on the test strip vial,
the results should fall within that range.
Testing tips:
• Please make a test after reading the instructions for use of control solution
thoroughly.
• Keep clean of the test area on the meter.
• Keep test strips and control solutions in proper condition according to the
instructions for use provided, such as expiry date, storage condition and so
forth.
• Before testing, make sure that the test strips and the meter for lipid profile
are at the temperature of 18-30℃(64-86℉) and those for glucose at
10-40℃(50-104℉).
Caution
If your control solution test falls out of range, please follow the next steps before
contacting customer support:
• Check the expiry dates on all the products you are using.
• Try another control solution test.
• If this test falls out of range, try another control solution test with a new unopened
vial of strips.
• After following the appropriate steps and the control solution test still falls out of range,
do not perform a test. Please contact the infopia customer service at [phone]
or [email protected].
• The control solution range is not the recommended range for your test.
• Discard the used control solution and the test strips carefully according to the local
regulations.
INSTRUCTIONS FOR LANCING DEVICE
PRECAUTIONS
• Never use a lancet that has been used by someone else. This could lead to
contamination.
• If the lancing device is to be used by another person, the unit must be properly
disinfected and a new tip and lancet must be used.
• Do not leave the lancet in the device after use.
• A new lancet must only be placed into the lancing device directly before testing.
• This device has many small parts and could be a choking hazard for children if
swallowed.
• In the case of hospital use, hospitals need to consult their own infection control
protocols in order to avoid any contamination.
• Always dispose of the used lancet in a biohazard garbage container.
Depth Indicator/Adjustable Tip Lancet Holder
Clear Tip
Ejection System Sliding Barrel
Release Button
COMPONENTS
ȴȶ
ȵ
ȵ
ȵ
ƌ

• 28 • • 29 •
HOW TO USE
Wash your hands carefully with warm water to increase the circulation of the
blood into the fingers.
Dry hands thoroughly until the finger to be pricked is completely dry. Please read
the following steps with corresponding illustrations to understand how to use the
lancing device.
RECOMMENDED AVAILABLE LANCETS
Some general sterilized lancets are BD-Ultra Fine, Cleanlet Fine, E-Z Ject, G-P
Lite, Microlet,
Monolet, One Touch, Soft Touch, Therasense, Ultra TLC and Unilet GP.
Note: Some less known lancets may not work properly with the lancing device
due to their dimensions.
Please, contact your supplier to make sure you are using proper lancets.
1. Unscrew the tip of the lancing device by turning it
counter-clockwise while holding the base firmly.
2. With two fingers, pull out the lancet carrier and hold
it in place.
3. While holding the lancet carrier, insert a new sterile
lancet into the bottom of lancet carrier.
5. Put the tip of the lancing device back on and turn it
clockwise.
4. Twist the cap of the lancet off.
6. Hold the tip firmly in one hand then pull out the
sliding barrel with the other hand. This will cock the
lancing device.
7. Place the lancing device in place. Hold the lancing
device firmly against the side of the finger, with the
cap resting on the finger. (The harder it is pressed the
deeper the puncture.) Press the release button to
take a sample.
8. Unscrew the tip of the lancing device by turning it
counter-clockwise.
9. Push the lancet ejector forward with the thumb and
simultaneously pull out the sliding barrel to dispose
of the used lancet in a proper biohazard container.
Click

• 30 • • 31 •
Testing Your Blood
venouse whole blood and serum process for Lipid Profile test
For venous whole blood and serum, acceptable anti-coagulants are
EDTA, heparin and these samples may be stored at 4℃~20℃(39℉
~68℉) for three days.
Please follow the procedure below.
1. Allow blood sample to reach room temperature.
2. Anti-coagulated blood should be mixed well prior to testing.
3. Remove the stopper from the holder and collect the sample 
by using pipette.
4. Apply the sample to the test strip.
Optional method
- Take out a drop of blood sample on a clean container.
- Apply your blood sample to the Lipid Profile strip and do not take off capillary rod until
you get the beep sound. The test will automatically start.
Caution
You may get an inaccurate result if the blood sample is not completely fill in a single
action.
Caution :
Do not freeze the samples, but store at4ŭinstead and test quickly.
Please test freshly collected samples. If the samples are not fresh, LPL(lipoprotein
lipase) or LCAT(lecithin cholesterol acyltransferase) may affect the form of lipoprotein.
Testing Your Blood - Preparation
Caution
1) To reduce the chance of infection.
• The lancing device and sterile lancets should NOT be shared with others.
• Always use a new, sterile lancet.
• Lancets are for single use only.
• Avoid getting hand lotion, oils, dirt, or debris in or on the lancets and the lancing
device.
2) Do not operate the meter in direct sunlight.
3) Practice using the lancing device and become accustomed with its use.
Wash your hands with warm, clean water and soap. Dry your hands completely
before testing.
Blood testing
A strip instructions for use is included with each box of test strips.
Please read the strip instructions for use along with this section completely and
carefully before testing.
Testing supplies
To perform a blood test you need:
• LipidPro
TM
meter
• Test strips
• Sterile lancet
• Capillary rod
• Lancing device

• 32 • • 33 •
Quick reference of test procedure -Lipid test
1) After coding the meter, insert the test strip and
press Mode ( ) button
2) Prick the finger with a lancing device for
the sample blood.
3) Collecting the sample blood to the capillary rod.
4) Make sure the enough sample has been
collected to the capillary rod.
5) Contact the capillary rod with the sample to the
test area of the strip so as to start the test.
Caution
• If the test result is out of the test range, the Hi/Lo message will be shown on the LCD.
• Safely discard used test strips, lancets and capillary rods.
• It is required to insert the blood sample on the LipidProTM test strip within 3 minutes
while the blood inserting icon is blinking.
Testing Your Blood
1. Lipid Profile test
When you collect the sample, please use the capillary rod provided with the test
strip package. Make sure enough sample has been collected to the capillary rod.
Place your fingertip to the top edge of glucose test
strip.
Apply your blood sample to the Lipid Profile strip
and do not take off capillary rod until you get the
beep sound. The test will automatically start.
2. Glucose test
Caution
If blood is stained outside the sample area, carefully wipe the stain out with a tissue.
Do not allow the wiping tissue to touch the open end of the sample area of the collecting leg.
[ Correct ]
completely
filled
poorly
filled
correct incorrect
Correct : Completely filled Incorrect : Poorly filled
[Incorrect ]
Caution
You may get an inaccurate result if the blood sample is not completely fill in a single
action.
Capillary blood process

• 34 • • 35 •
Test Procedure
1. Lipid test - Test for multi items
Press mode ( ) button after a test strip is
inserted and confirm if the meter recognizes the
right test strip by checking out the corresponding
symbol on its display.
The meter displays the code number and the
testing symbols ( , , )
together. In 5 seconds the meter automatically
enters into testing mode.
The symbol of blood is blinking.
Please apply the sample to the total cholesterol
test area of test strip until you hear beep sound.
Then, the symbol, disappears.
Quick reference of test procedure -Glucose test
1) Insert the glucose test strip. Code number
is automatically displayed. Compare with
code number printed on test strip vial. If
not identical, discard the test strip and
restart.
2) Prick the finger with a lancing device for
the sample blood.
3) Apply blood sample until confirmation
window is completely filled.
Meter automatically begins to countdown.
If the countdown does not start, do not
add more blood to the test strip. Discard
the test strip, and restart testing.
4) Test result appears in 3 seconds.
Caution
• If the test result is out of the test range, the Hi/Lo message will be shown
on the LCD.
• Safely discard used test strips and lancets.

• 36 • • 37 •
Test Procedure
2. Test for each single item
1) Total Cholesterol test
Press mode ( ) button after a test strip is
inserted and confirm if the meter recognizes the
right test strip by checking out the corresponding
symbol on its display.
The meter displays the code number and the
testing symbols ( ) together.
In 5 seconds the meter automatically enters into
testing mode.
The symbol of blood is blinking.
Please apply the sample to the test area of
test strip until you hear beep sound.
Test Procedure
Please apply the sample to the HDL-cholestrol
test area of test strip until you hear beep sound.
Then, the symbol, disappears.
Please apply the sample to the triglyceride test
area of test strip until you hear beep sound.
Then, the symbol, disappears.
The meter displays , blinking in
order, which means it is under test.
In the case of LDL-cholesterol, if density
of triglyceride is over 350mg/dL, it can't be
measured.
Total cholesterol is displayed with 3 times
of buzzing sound.
In order to check each test item, please press up or down button. You can
check out each result of Total Cholesterol, HDL-Cholesterol and Triglyceride.

• 38 • • 39 •
Test Procedure
The symbol of blood is blinking.
Please apply the sample to the test area of
test strip until you hear beep sound.
The meter displays , blinking in
order, which means it is under test.
When the test is completed (in about 2 minutes),
the meter displays the test result of with
the symbol.
Test Procedure
The meter displays , blinking in order,
which means it is currently undergoing tests.
When the test is completed (in about 2 minutes),
the meter displays the test result of with
the symbol.
2) HDL-Cholesterol test
Press mode ( ) button after a test strip is
inserted and confirm if the meter recognizes the
right test strip by checking out the corresponding
symbol on its display.
The meter displays the code number and the
testing symbols ( ) together. In 5 seconds the
meter automatically enters into testing mode.