Infoscan HS3150 Series User manual

Quick Reference Guide HS3660 Series
南京比邻智能识别技术有限公司
NANJING BILIN INTELLIGENT IDENTIFICATION TECHNOLOGYCO., LTD.
Quick Reference Guide
H S 3 1 5 0 S e r i e s
W i r e d H a n d h e l d I n d u s t r i a l
D P M B a r c o d e R e a d e r
Ver: 20230802

Quick Reference Guide HS3150 Series
南京比邻智能识别技术有限公司
NANJING BILIN INTELLIGENT IDENTIFICATION TECHNOLOGYCO., LTD.
1
Packing List
Content
Unit
QTY
Remark
HS3150 Host
pc
1
The reader host
Guide book
pc
1
Connection method and
setting codes
Cable
pc
1
USB or RS232 communication
cable
5VDC power
pc
1
Supplied only for RS232
communication mode

Quick Reference Guide HS3150 Series
南京比邻智能识别技术有限公司
NANJING BILIN INTELLIGENT IDENTIFICATION TECHNOLOGYCO., LTD.
2
Overall Look

Quick Reference Guide HS3150 Series
南京比邻智能识别技术有限公司
NANJING BILIN INTELLIGENT IDENTIFICATION TECHNOLOGYCO., LTD.
3
Product Connection Graph
USB connection
Serial port (RS-232) connection

Quick Reference Guide HS3150 Series
南京比邻智能识别技术有限公司
NANJING BILIN INTELLIGENT IDENTIFICATION TECHNOLOGYCO., LTD.
4
Technical Parameter Specifications
Parameter
Parameter Description
Sensor type
CMOS sensor
Resolution
1280x1024
Frame rate
Up to 60 fps
Viewing angle
44° (horizontal) 34° (vertical)
Roll/ Pitch/ Yaw
360°(roll)、65°(pitch)、55°(yaw)
Reading direction
Roll/ Pitch/ Yaw±60° Oblique angle±55°
Illumination
White LED (available in red and blue)
Aiming mode
Red LED
Communication
interface
RS232 / USB keyboard / USB COM
Operating voltage
5V±5% VDC
Standby current
150mA
Operating current
370mA
Consumption
1.85W
Shell material
PC
Weight
146g
Dimension
163mmx69.5mmx106mm
Operating
temperature
0℃ ~ +45℃

Quick Reference Guide HS3150 Series
南京比邻智能识别技术有限公司
NANJING BILIN INTELLIGENT IDENTIFICATION TECHNOLOGYCO., LTD.
5
Storage
temperature
-10℃ ~ +50℃
Relative humidity
5%~95% non-condensing
IP rating
IP54
Product
certification
CE FCC RoHS
Ambient light
immunity
Sunlight: 10000 Lux Incandescent lamp: 6000 Lux
Shock resistance
Capable of withstanding multiple impacts of falling
from a height of 1.2 meters onto the cement floor
(allowable deflection of 5°)
Readable bar
code types
1D, 2D and stacked codes that comply with national
and international standards
Maximum reading
accuracy
1D code: 3mil 2D code: 5mil
Note: Performance may be affected by bar code quality and environmental conditions.

Quick Reference Guide HS3150 Series
南京比邻智能识别技术有限公司
NANJING BILIN INTELLIGENT IDENTIFICATION TECHNOLOGYCO., LTD.
6
Note of Barcode Reading
The red aiming laser emitted by the reader should be located in
the center of the barcode or pass through the bar code. The following
illustrations are several correct aiming methods.
The closer the reader is to the barcode, the smaller the aiming
range of the laser; The farther the reader is away from the barcode, the
larger the aiming range of the laser. If the barcode is small, the reader
should be placed close to the barcode; If the barcode is large, the
reader should step away from the barcode to make it easier to
correctly read it.
If the barcode has a high reflectivity (such as coated), you may
need to tilt the reader at an angle to scan the barcode.

Quick Reference Guide HS3150 Series
南京比邻智能识别技术有限公司
NANJING BILIN INTELLIGENT IDENTIFICATION TECHNOLOGYCO., LTD.
7
Settings
Switch to USB communication mode
When the device switches from RS232 interface to USB interface, it
needs to replace with the USB cable first then scan the setting code
before setting the USB communication mode. If the default is USB
communication mode already, the USB communication transmission
mode can be set directly.
USB communication transmission mode
Switch to RS232 communication mode
When the device is switched from USB interface to RS232 interface,
it is necessary to replace with the RS232 cable first and then scan the
setting code before setting the Serial communication Baud and check
bit. If it has already defaulted to RS232 communication mode, there is
USB communication mode
USB keyboard
USB simulated serial port

Quick Reference Guide HS3150 Series
南京比邻智能识别技术有限公司
NANJING BILIN INTELLIGENT IDENTIFICATION TECHNOLOGYCO., LTD.
8
no need to scan this setting barcode.
Serial port Baud setting
RS232 Serial communication mode
1200
2400
4800
9600
19200
38400
57600
115200

Quick Reference Guide HS3150 Series
南京比邻智能识别技术有限公司
NANJING BILIN INTELLIGENT IDENTIFICATION TECHNOLOGYCO., LTD.
9
Serial communication check bit setting
7 data bits, 1 stop character,
even parity bit
8 data bits, 1 stop character,
odd parity bit
8 data bits, 1 stop character,
no parity check

Quick Reference Guide HS3150 Series
南京比邻智能识别技术有限公司
NANJING BILIN INTELLIGENT IDENTIFICATION TECHNOLOGYCO., LTD.
10
Suffix
Add carriage return suffix
Add carriage return and line feed suffix
Remove suffix
add a carriage return suffix
for all code systems
add carriage return and line feed suffix
for all code systems
clear all codes suffixes

Quick Reference Guide HS3150 Series
南京比邻智能识别技术有限公司
NANJING BILIN INTELLIGENT IDENTIFICATION TECHNOLOGYCO., LTD.
11
Screen barcode reading mode
Supports adaptive reading of paper, mobile screen and computer
screen. In some special situations, the device can be set to mobile
phone mode to make it easier to read the screen. In this mode, the
performance of reading paper barcodes deteriorates when the external
light is poor.
Sensing mode
In sensing mode, turn on low lighting to detect if a barcode has
passed by. When a barcode is detected, turn on the lighting to read the
barcode.
sensing mode
mobile phone screen - handheld reading mode

Quick Reference Guide HS3150 Series
南京比邻智能识别技术有限公司
NANJING BILIN INTELLIGENT IDENTIFICATION TECHNOLOGYCO., LTD.
12
Manual trigger mode
If you need to turn off the LED screen reading mode or sensing
mode, the device can be set to manual trigger mode (which is the
default factory mode), in which the button needs to be triggered to
scan the barcode.
Code system settings
All coding systems
all coding systems off
all coding systems on
manual trigger
mode

Quick Reference Guide HS3150 Series
南京比邻智能识别技术有限公司
NANJING BILIN INTELLIGENT IDENTIFICATION TECHNOLOGYCO., LTD.
13
Codabar
Code 39
Interleaved 2 of 5
<Default for all Interleaved 2 of 5 settings>
off
off
on
off
on
on

Quick Reference Guide HS3150 Series
南京比邻智能识别技术有限公司
NANJING BILIN INTELLIGENT IDENTIFICATION TECHNOLOGYCO., LTD.
14
Code 93
<Default for all Code 93 settings>
Straight 2 of 5 Industrial (three-bar start/stop)
<Default for all traight 2 of 5 Industrial settings>
Straight 2 of 5 IATA (two-bar start/stop)
<Default for all Straight 2 of 5 IATA settings>
off
off
on
off
on
on

Quick Reference Guide HS3150 Series
南京比邻智能识别技术有限公司
NANJING BILIN INTELLIGENT IDENTIFICATION TECHNOLOGYCO., LTD.
15
Code 128
<Default for all Code 128 settings>
GS1-128
<Default for all GS1-128 settings>
UPC-A
<Default for all UPC-A settings>
off
off
on
on
on

Quick Reference Guide HS3150 Series
南京比邻智能识别技术有限公司
NANJING BILIN INTELLIGENT IDENTIFICATION TECHNOLOGYCO., LTD.
16
Note: When scanning “off”barcode of UPC-A setting codes, UPC-A
barcode is transmitted as EAN-13.
UPC-E0
<Default for all UPC-E settings>
EAN/JAN-13
<Default for all EAN/JAN settings>
off
off
off
on
on

Quick Reference Guide HS3150 Series
南京比邻智能识别技术有限公司
NANJING BILIN INTELLIGENT IDENTIFICATION TECHNOLOGYCO., LTD.
17
Note: If you want to convert UPC-A barcodes to EAN-13 type,
please scan “off” code of UPC-A setting barcode.
ISBN Translate
When set to ISBN symbol transmission, the EAN-13 Bookland
symbol will be converted to the equivalent ISBN symbol format.
Default=Off
PDF417
<Default for all PDF417 settings>
off
off
on
on

Quick Reference Guide HS3150 Series
南京比邻智能识别技术有限公司
NANJING BILIN INTELLIGENT IDENTIFICATION TECHNOLOGYCO., LTD.
18
QR code
<Default for all QR Code settings>
Data Matrix
<Default for all Data Matrix settings>
off
off
on
on

Quick Reference Guide HS3150 Series
南京比邻智能识别技术有限公司
NANJING BILIN INTELLIGENT IDENTIFICATION TECHNOLOGYCO., LTD.
19
Aztec code
<Default for all Aztec Code settings>
Factory reset
This setting barcode is only allowed to be scanned when the
reader is unable to function properly and scanning setting barcode for
standard products is still invalid.
Sample barcode
1 2 3 A B C
Code 39
Factory Reset
off
on