Ingersoll-Rand 66554-X User manual

E2000 DPRINTED IN U.S.A.
& [phone] D F AX [phone]
INGERSOLL-RAND COMPANY
P.O. BOX 151 DONE ARO CENTER DBRYAN, OHIO 43506Ć0151
OPERATOR’S MANUAL
66554-X
RELEASED: 2-13-78
REVISED: 10-6-00
(REV. B)
HEAVY-DUTY CARTS
66554-1 66554-2
READ THIS MANUAL CAREFULL Y BEFORE INST ALLING,
OPERA
TING OR SER VICING THIS EQUIPMENT .
It is the responsibility of the employer to place this information in the hands of the operator . Keep for future reference.
(For 4-1/4” and 6” Pumps) (For 8” and 10” Pumps)

66554ĆX
2OF4
ASSEMBLY INSTRUCTIONS
1. Insert (4) leg (le t) and (8) axle into (3) cart rame as shown in view.
2. Align the holes on the (4) leg and (8) axle to insert (7) cap screw thru
(3) cart rame. Attach (11) lat washer, (12) lockwasher and (13) nut.
NOTE: Two position holes are located in (8) axle to acilitate optional
wheel spacing. Maximum wheel spacing is or stability.
3. Place two (9) washers onto (8) axle with (1) wheel.
4. Attach (10) retaining ring to groove in (8) axle.
5. Repeat steps 1 thru 4 to attach (2) leg (right) and (1) wheel to (3) cart
rame.
6. Attach (23) or (17) bracket to (3) cart rame using two (16) cap
screws, (11) lat washers, (12) lockwashers and (13) nuts.
NOTE: Select a set o holes that will give pump, that will be used, deĆ
sired clearance with loor.
7. Attach (15) handle to (23) or (17) bracket using our (14) cap
screws, (11) lat washers, (12) lockwashers and (13) nuts.
8. Mount (21) or (22) plate on pump to be used. Then place on (23) or
(17) bracket and asten using (20) cap screws, (19) lockwashers
and (18) lat washers.
PARTS LIST
ITEM DESCRIPTION (Size in Inches) QTY PART NO. ITEM DESCRIPTION (Size in Inches) QTY PART NO.
Wheel (2) 9 5 5
2 Leg (right) ( ) 99306
3 Cart Frame ( ) 66555
4 Leg (left) ( ) 99305
5 Washer (2) 70607
6 Plastic Cap (2) 77366
7 Screw, Cap ( /2" Ć 3 x 5") (2) Y6Ć8 9ĆC
8 Axle (2) 99304
9 Washer (4) 9 522
0 Retaining Ring (2) 993 0
Washer, Flat (8) F 5Ć27ĆC
2 Lockwasher ( /2") (8) Y 4Ć8 6
3 Nut ( /2" Ć 3) (8) Y 2Ć8ĆC
4 Screw, Cap ( /2" Ć 3 x 2") (4) Y6Ć89ĆC
5 Handle ( ) 99303
6 Screw, Cap ( /2" Ć 3 x ") (2) Y6Ć85ĆC
7 Bracket (model 66554Ć only) ( ) 66367
8 Washer, Flat ( /4") (model 66554Ć only) (4) Y 3Ć4ĆC
(model 66554Ć2 only) (6) Y 3Ć4ĆC
9 Lockwasher ( /4") (model 66554Ć only) (4) Y 4Ć4 6
(model 66554Ć2 only) (6) Y 4Ć4 6
20 Screw, Cap ( /4" Ć 20 x 5/8") (66554Ć ) (4) Y6Ć42ĆC
(model 66554Ć2 only) (6) Y6Ć42ĆC
2 Plate (model 66554Ć only) ( ) 9 396
22 Plate (model 66554Ć2 only) ( ) 9237
23 Bracket (model 66554Ć2 only) ( ) 66543
*24 Cap Screw (3/8" Ć 6 x Ć /2") (4) Y6Ć67ĆC
*25 Nut (3/8" Ć 6) (model 66554Ć only) (4) Y 2Ć6ĆC
*26 Nut (3/8" Ć 6) (model 66554Ć2 only) (4) Y 2Ć 06ĆC
*27 Washer (3/8") (model 66554Ć2 only) (4) Y 3Ć6ĆC
*28 Lockwasher (3/8") (4) Y 4Ć6 6
* Included but not shown

66554ĆX 3OF4
PARTS LIST
23 22
2
20
9
8
7
6
5
4
3 2
0
9
8
7
6
5
4
3
2
20
9
8
3 2
3
2

66554ĆX
4OF4
CART DIMENSION DA TA
5 " Approx. Max. Height
( 295 mm)
44" Approx. Min. Height
( 8 mm)
24" Approx. Min. Width
(6 0 mm)
30" Approx. Max. Width
(762 mm)
28" Approx.
(7 mm)
PN 97999Ć574