Ingersoll-Rand Intellisys Remote Interface User manual

INGERSOLLRAND@
AIR COMPRESSORS
INTELLISYS
REMOTE
INTERFACE
OPERATORS/
INSTRUCTION MANUAL
PARTS LISTS
1 Before installation or starting the lntellisys Remote Interface
for the first time, this manual should be studied carefully to
obtain a clear knowledge of the unit and or the duties to be
performed while operating and maintaining the unit
RETAIN THIS MANUAL WITH UNIT.
This technical manual contains IMPORTANT SAFETY DATA
and should be kept with the lntellisys Remote Interface at all
times.
I
APDD 635A
March 1997

Bit 0: Host/Local (R/W)
0 = Local
1 = Host
Bit 1: Run/Stop (R/W)
0 = stop
1 = Run
Bit 2: Load/Unload (R/W)
0 = Unload
1 = Load
Bit 3: Modulating (R)
0 = Not Modulating
1 = Modulating
Bit 4: Unused
Bit 5: Stopped in Auto Restart (R)
0 = Not Stopped in Auto Restart
1 = Stopped in Auto Restart
Bit 6: Alarm (R)
0 = No Alarms
1 = Alarms
Bit 7: Warning (R)
0 = No Warnings
1 = Warnings
Bit 8: On/Off Line Mode (R)
0 = Not in On/Off Line Mode
1 = On/Off Line Mode
Bit 9: Mod/ACS or Mod Only (R)
0 = Not in Mod/ASC Mode
1 = Mod/ASC Mode
Bits 10-12: Unused
Bits 13-15: Unit Type (R)
001 = SSR controller
FIGURE 4-2 INTELLISYS SSR CONTROLLER REGISTER OISTATUSICONTROL
Register 096: Language
0 = English
1 = Spanish
2 = French
3 = Portuguese
Register 097: Units of Measure
0
= “F and PSI
1 = “C and PSI
2 = “C and Bar
3 = “C and kPa
4 = “C and kg/cm2
Register 99: Rated Horse Power
0 = 50
6 = 200
1 =60
7 = 250
2 = 75 8 = 300
3= 100
9 = 350
4= 125
10=400
5= 150
II=450
FIGURE 4-3 INTELLISYS SSR CONTROLLER REGISTER CODES
Bit 0: Run/Stop (R)
0 = stop
1 = Run
Bit 1: On/Off Line Mode (R)
0 = Not in On/Off Line Mode
1 = On/Off Line Mode
Bit 2:. MODlACS Mode (R)
0 = Not in Mod/ACS Mode
1 = Mod/ACS Mode
Bit 3: Load/Unload (R)
0 = Unload
Bit 4: Stopped Auto Restart (R)
0 = Not Stopped in Auto Restart
1 = Stopped in Auto Restart
Bit 5: Unused
Bit 6: Unused
Bit 7: Unused
FIGURE 4-4 INTELLISYS SSR CONTROLLER STATUS ALARM HISTORY
16