Ingrid Crs-pop User manual

Rev. 1.0 2019/09

CRS-POP Manual EN

NOTE

SPECIFICATIONIMPORTANT NOTICE

MAINTENANCE

!!! PERIODICALLY CHECK THE TIGHTENINGS. INCORRECT

TIGHTENING MAY CAUSE MALFUNCTIONING OR BREAKAGE

This product is not guaranteed against natural wear and deterioration from

normal use and aging.

If any part of the information on the manual is unclear to you, do not

proceed with the installation. Instead, contact your place of purchase or a

local bicycle dealer for their assistance.

Make sure to read all instruction manuals included with the product.

All manuals can be viewed on our website http://ingrid.bike

This manual is intended primarily for use by professional bicycle

mechanics. Users who are not professionally trained for bicycle assembly

should not attempt to install the components

SPECIFICATION

INGRID È UN MARCHIO CEDUTO IN LICENZA TEMPORANEA A MOSCONI s.r.l.

MOSCONI s.r.l. non è responsabile per danni o lesioni causati da un'installazione non corretta o uso non

corretto del prodotto.

MOSCONI s.r.l. garantisce i suoi prodotti contro difetti di fabbricazione o di materiale per un periodo di

due anni a partire dalla data di acquisto del primo acquirente, comprovata dalla ricevuta fiscale/scontrino

o comprovata dalla fattura in caso di acquisto diretto. Il difetto deve essere comunicato dal primo proprie-

tario al rivenditore in caso di acquisto non diretto o per posta /e-mail a [email protected] in caso di acquisto

diretto. In caso di restituzione, solo dopo la nostra autorizzazione, gli oneri e rischi di trasporto sono a cari-

co del cliente.

MOSCONI s.r.l. raccomanda di seguire le istruzioni fornite per la corretta installazione ed utilizzo; in caso

le istruzioni non vengano seguite, la garanzia decade. I manuali d'uso INGRID si possono trovare online

all'indirizzo ingrid.bike

La garanzia non copre una manutenzione ordinaria o straordinaria mancante, sbagliata o non appropria-

ta, non copre i danni causati da errato montaggio o assemblaggio con componenti non compatibili, non

copre danni dovuti a urti, cadute o incidenti, la normale usura, l'alterazione o la modifica del prodotto ori-

ginale e i danni causati dal trasporto. Se MOSCONI s.r.l., dopo aver controllato il prodotto, ritiene che il

danno è dovuto ad uno dei motivi di cui sopra, la richiesta di garanzia non sarà accettata e l'articolo difet-

toso verrà restituito al ricorrente che sosterrà le eventuali spese di spedizione.

Nella misura ammessa dal diritto locale, fatta eccezione per gli obblighi stabiliti specificatamente nella

presente garanzia, in nessun caso MOSCONI s.r.l. o suoi fornitori di terze parti sarà responsabile per dan-

ni diretti, indiretti, speciali, incidentali o consequenziali.

MOS/INGRID recommends to follow the provided instructions for the correct usage and installation; in

case instructions are not followed, warranty expires. The INGRID user manuals can be found online at in-

grid.bike

To the extent allowed by local law, except for the obligations specifically set forth in this warranty state-

ment, in no event shall MOSCONI s.r.l. or its third party suppliers be liable for direct, indirect, special, inci-

dental, or consequential damages.

In case of return, just after our authorization, transport charges and risks are at customer cost.

MOSCONI s.r.l. guarantee its products against materials or manufacturing defects for a period of two

years starting from the date of purchase of the first buyer, proven by the receipt or proven by the invoice in

case of direct purchase. The defect has to be communicated by the first owner to the dealer in case of

non-direct purchase or by mail/e-mail to [email protected] in case of direct purchase.

MOSCONI s.r.l. is not responsible for damages or injury caused by improper installation or wrong usage

of the product.

Warranty do not cover missed, wrong or bad ordinary or extraordinary maintenance, damages caused by

wrong assembly or with non-compatible components assembly, impacts, falls or accidents, normal con-

sumption, alteration or modification of the original product and damages caused by transport. If

MOSCONI s.r.l., after checking the product, finds that the damage is due to one of the reasons mentioned

above, the warranty request will not be accepted and the defective item is sent back to the plaintiff who

supports the shipping fees.

INGRID IS A TRADEMARK TEMPORARY LICENSED TO MOSCONI s.r.l.

Limited warranty and disclaimer

MOSCONI s.r.l. | via la Villa 28 zona artigianale Ghilardino 61034 Fossombrone, PU

Limitazione di garanzia ed esonero di responsabilità

- Press Fit BB92 (92 mm) - EL237

- Press Fit BB89.5 (89.5 mm) - EL237 + MW114 (spacer)

- BB-PF8200 (ceramic) + El226 (adapter)

The use of CRS-L2 with bottom bracket not included in this list does

not guarantee the proper functioning

To install the bottom bracket refer to the manufacturer’s manuals.

- BB30 (68/73 mm) - BB-OS6000 + El226 (adapter)

- BB-EVO9500 (ceramic)

- Press Fit 30 (68/73 mm) - BB-PF6000 + El226 (adapter)

- BB-OS8200 (ceramic) + El226 (adapter)

We recommended to use the following FSA bottom bracket and spacer:

- BSA (68/73 mm) - BB-EVO7000

Available arms lenght 170/175

INTENDED USE: CX/GRAVEL, XC/MARATHON, TRAIL

Chain line 49,5 mm (with L131 spindle), 52 mm (with L136 spindle)

Al alloy 2024 Cranks

Al alloy 7075 30 mm spindle

Weight 520g (arms lenght 170 with L131 spindle, w/o chainring)

Q-Factor 163 mm (with L131 spindle), 168 mm (with L136 spindle)

COMPATIBILITY

APPLY MEDIUM STRENGTH THREADLOCKER TO BLUE COLORED SURFACE

APPLY GREASE TO RED COLORED SURFACE

10 TIGHTENING TORQUE

40-45 Nm

TIGHTENING TORQUE

40-45 Nm TO TIGHTEN

THE RING NUT USE

THE INGRID TOOL

ING-T-CS

TIGHTENING TORQUE

12-15 Nm

DSNDS

!! AFTER

INSTALLATION

CHECK THIS

DIMENSION !!

Screw the RING to preload

the crankset until it stops.

Make sure there is no play.

Tighten LOOSELY the screw to lock the

preload ring by a T9 Torx screwdriver.

APPLY GREASE TO RED COLORED SURFACE

DO NOT USE

WAVE WASHERS

min 11.5 mm

SPINDLE ASSEMBLY

CRANCKSET AND CHAINRING ASSEMBLY/DISASSEMBLY

!!! PERIODICALLY CHECK THE TIGHTENINGS.

INCORRECT TIGHTENING MAY CAUSE

MALFUNCTIONING OR BREAKAGE

USE SPACER AS

INDICATED IN THE

BOTTOM BRACKET

MANUAL

We recommended to use the following FSA bottom bracket and spacer:

- BSA (68/73 mm) - BB-EVO7000

- BB-EVO9500 (ceramic)

- Press Fit 30 (68/73 mm) - BB-PF6000 + El226 (adapter)

- BB-PF8200 (ceramic) + El226 (adapter)

- BB30 (68/73 mm) - BB-OS6000 + El226 (adapter)

- BB-OS8200 (ceramic) + El226 (adapter)

- Press Fit BB92 (92 mm) - EL237

- Press Fit BB89.5 (89.5 mm) - EL237 + MW114 (spacer)

The use of CRS-L2 with bottom bracket not included in this list does

not guarantee the proper functioning

To install the bottom bracket refer to the manufacturer’s manuals.

Total width of the bottom bracket

including bearing shields and spasers

DSNDS 47

49.5

44.5

- 1

91.5 for L131 SPINDLE

96.5 for L136 SPINDLE

Any part of this drawing may not be reproduced or modiﬁed without written consent of Giulio Mancini. Any violation will be persecuted by International Laws.

Draft2

GIACOMO ZENOBI

Errore: Nessun riferimento

Drawn:

Emission Date:

Checked:

Approved:

GIULIO MANCINI

2016/02/05

P.N.

Allowance:Unit:

Scale:

Material:

Object:

Finishing:

Note:

File Name:

Mass:

Volume:

IT 9

Revision: Revision Date: Revision Description: Applied: Approved:Checked:

Errore: Nessun riferimento

come da campione

Al 2024 T351

0.195 kg

69899.35 mm^3

1:1

via della capinera, 20 - 61100 Pesaro (PU), Italia - tel. e fax +39072151711 - [email protected] - www.giuliomancini.it

GIULIO MANCINI

INGEGNERE

Project: Errore: Nessun riferimento

Any part of this drawing may not be reproduced or modiﬁed without written consent of Giulio Mancini. Any violation will be persecuted by International Laws.

Draft2

GIACOMO ZENOBI

Errore: Nessun riferimento

Drawn:

Emission Date:

Checked:

Approved:

GIULIO MANCINI

2016/02/05

P.N.

Allowance:Unit:

Scale: