Init NT-WG1144 User manual

ASSEMBLY
INSTRUCTIONS
NT-WG1144
Wood and Glass TV Stand
Safety information and
specifications...........................................2
Tools needed ...........................................3
Parts ............................................................3
Hardware...................................................4
Assembly instructions ..........................5
Before using your new product, please read these instructions to prevent any damage.
NT-WG1144_13-0328_MAN_V4_ENG.fm Page 1 Wednesday, May 8, 2013 9:07 AM

2
Still need help? Call 800-573-2860
Safety information and specifications
CAUTION: This stand’s glass work surface
is intended only for use with a product not
weighing more than 135 lbs. (61.2 kg) and
having a width that will permit it to sit
evenly on the stand with no more than a one-inch
overhang on each side on the top shelf. Using with
other products, including products that weigh more
than the maximum weight allowed or extend
beyond the maximum width, may result in instability,
which may cause possible injury.
Caution: This product contains small items that
could be a choking hazard if swallowed.
Keep these items away from young children!
Do not use the glass shelves to lift the stand. See
instructions for more details.
Model #: NT-WG1144
Distributed by Best Buy Purchasing, LLC
Manufacturer: Whalen Furniture Mfg. Inc.
Manufacture Date:
Maximum weight: 135 lbs. (61.2 kg)
Maximum width: 1-inch overhang on each side
of the top shelf
Overall dimensions (W × H × D):
44 × 24.25 × 20" (111.8 × 61.6 × 50.8 cm)
Top shelf (W × D):
44 × 15" (111.8 × 38.1 cm)
Middle shelf (W × H × D):
34.88 × 9.39 × 16" (88.6 × 23.8 × 40.6 cm)
Bottom shelf (W × H × D):
34.88 × 9.5 × 18.5" (88.6 × 24.1 × 47 cm)
44" (111.8 cm)
15" (38.1 cm)
24.25" (61.6 cm)
18.5" (47 cm)
NT-WG1144_13-0328_MAN_V4_ENG.fm Page 2 Wednesday, May 8, 2013 9:07 AM

3
Still need help? Call 800-573-2860
Parts
Package contents: parts
Note: You may receive extra hardware.
Tools needed
DrillNo. 2 Phillips screwdriver
ATop shelf frame (1) BMiddle shelf frame (1)
CBottom shelf frame (1)
DRear support (1)
ELeft leg (1) FRight leg (1)
GTop shelf (1)
HMiddle shelf (1) I Bottom shelf (1)
NT-WG1144_13-0328_MAN_V4_ENG.fm Page 3 Wednesday, May 8, 2013 9:07 AM

4
Still need help? Call 800-573-2860
Hardwa re
Package contents: hardware
Make sure you have all the hardware necessary to assemble your new TV stand:
Video Instruction Guides: Go to http://init.showuhow.com to view step-by-step instructional
videos for assembling and installing your product. Enter the following product number on the
ShowUhow homepage - INTANY00004.
http://init.showuhow.com/VIGS/INTANY00004/tabid/5924/language/en-US/Default.aspx
Label Hardware Qty.
J1
K1
L19
M24
N6
P26
Left bracket
Right bracket
Suction cup
3/4" bolt
(19.05 mm)
1-1/4" bolt
(31.75 mm)
Lock washer
*A non-toxic touch-up pen has been
provided to repair any small nicks or
scratches that may occur during shipping
or assembly.
Label Hardware Qty.
Q26
R2
S1
T1
U1
Flat washer
Cable clip
Allen (hex)
wrench 4 mm
(0.158")
Touch-up pen*
Tipping
restraint
hardware
kit
10 20 30 40 50 60 70 80 90 100mm
1234in
NT-WG1144_13-0328_MAN_V4_ENG.fm Page 4 Wednesday, May 8, 2013 9:07 AM

5
Still need help? Call 800-573-2860
Assembly instructions
Step 1 Attach the shelf frames (A, B, C) to the rear support (D). Make sure the inside corner plates on the shelf
frames will face up after assembly.
You’ll n eed:
Up
Corner
plates
M (8) N(2) S(1)P(10) Q(10)
NT-WG1144_13-0328_MAN_V4_ENG.fm Page 5 Wednesday, May 8, 2013 9:07 AM

6
Still need help? Call 800-573-2860
Step 2 Attach the left and right legs (E, F) to the shelf frames. Make sure that the tops are flush with the wood front
rail on the top shelf frame (A).
You’ll need:
M (6) N(4) S(1)P(10) Q(10)
NT-WG1144_13-0328_MAN_V4_ENG.fm Page 6 Wednesday, May 8, 2013 9:07 AM

7
Still need help? Call 800-573-2860
Step 3 Attach the left and right brackets (J, K) to connect the middle rails of the top shelf frame (A) with the rear
support (D).
You’ll n eed:
J(1) K(1) P(6) S(1)M(6) Q(6)
NT-WG1144_13-0328_MAN_V4_ENG.fm Page 7 Wednesday, May 8, 2013 9:07 AM

8
Still need help? Call 800-573-2860
Step 4 Attach the cable clips (R) onto the rear support (D).
TIP: You can use these cable clips to help keep your entertainment center’s cables organized.
You’ll need:
M(4) R(2) S(1)
NT-WG1144_13-0328_MAN_V4_ENG.fm Page 8 Wednesday, May 8, 2013 9:07 AM

9
Still need help? Call 800-573-2860
Step 5 Adjust the floor levelers on the bottom of both legs to level the TV stand.
Note: The floor levelers are
pre-attached on the bottom of
each leg.
NT-WG1144_13-0328_MAN_V4_ENG.fm Page 9 Wednesday, May 8, 2013 9:07 AM

10
Still need help? Call 800-573-2860
Step 6 Attach the suction cups (L) firmly into the top holes and inside corner plates on the shelf frames (A, B, C).
Install the glass shelves (G, H, I) with the black side of the glass down.
Tip: If a suction cup resists insertion, try pressing down on the middle of the cup with the hex wrench
while twisting it clockwise into the hole, as if you were screwing it in.
You’ll need:
L(19)
NT-WG1144_13-0328_MAN_V4_ENG.fm Page 10 Wednesday, May 8, 2013 9:07 AM

11
Still need help? Call 800-573-2860
Step 7Position the assembled stand against a wall where you plan to use it, then follow the instructions printed on
the bag containing the tipping restraint hardware kit (U) to attach the restraint hardware to the wall and the stand.
Note: You need a 3/8" drill bit to drill the hole for the wall anchor. The hole should be 1 1/2" deep.
For customer service, call: 877-573-2860 (U.S./Canada markets)
You’ll need:
U(1) Phillips screwdriver Drill
NT-WG1144_13-0328_MAN_V4_ENG.fm Page 11 Wednesday, May 8, 2013 9:07 AM

www.initproducts.com
Distributed by Best Buy Purchasing, LLC
7601 Penn Ave. South, Richfield, MN 55423 U.S.A.
© 2013 BBY Solutions, Inc., All Rights Reserved.
Init is a trademark of BBY Solutions, Inc. Registered in some countries.
All other products and brand names are trademarks of their respective owners.
V4 ENGLISH
13-0328
NT-WG1144_13-0328_MAN_V4_ENG.fm Page 12 Wednesday, May 8, 2013 9:07 AM