Whittier Wood 1114DUETa User manual

P.O. Box 2827
Eugene, OR 97402 USA
Production Code:
VN 08/18
Model #
1114DUETa
1-Drawer
Addison Nightstand
DUET finish
Assembly Instructions
IMPORTANT NOTES:
Wood can be susceptible to changing color over time when exposed to
strong sunlight. Use window shades, drapes or blinds to protect your
furniture. To help the surface age evenly and avoid dark and light
spots, periodically move items to expose the entire surface to an even
amount of light so it may develop a uniform patina.
For normal household use only. Not recommended for commercial use.
Do not climb, sit or stand on this piece of furniture.
Do not overload the drawers.
Unload items before you move this unit.
WARNING
Drilling, sawing, sanding or machining wood products can expose you to
wood dust, a substance known to the state of California to cause cancer.
Avoid inhaling wood dust or use a dust mask or other safeguards for
personal protection.
For more information go to: www.p65warnings.ca.gov/wood
This product can expose you to chemicals, including formaldehyde,
which are known to the State of California to cause cancer.
For more information go to: www.p65warnings.ca.gov/furniture
DESIGN SUBJECT TO CHANGE WITHOUT NOTICE.
CUSTOMER SERVICE
If you ever have questions about your furniture, please do not hesitate to contact us. In the unlikely event you need a
replacement part; we can make those parts available through an authorized Whittier Wood Furniture dealer. If you
cannot order replacement parts through your dealer, please contact our customer service department.
Hours: Our friendly customer service staff can be reached:
Monday-Friday 8:00 a.m. to 5:00 p.m. (Pacific Time).
You may leave a message 24 hours a day, seven days a week.
Customer Service: 800-653-3336 • Outside the U.S.: 541-687-0213
Fax: [phone]• Email: [e-mail]
Thank you for allowing us to help you furnish your
home. We are certain you will be delighted with
your new furniture for many years to come.

1114DUETa 1-Drawer Addison Nightstand
Parts List
1114DUETa —Page 2 —08/18
Please identify the parts and check that quantities received match those on this list.
If you need to replace a part, refer to the following letter and part name.
Part
Description
Quantity
Aa
Top Assembly (attached)
1
Ba
Case
1
C
Drawer Box (inserted)
1
D
Drawer Face (installed)
1
E
Base (attached)
1
F
16" Drawer Slides (pre-installed sets)
1
G
#6 x 3/4" Philtruss Screw (inserted)
6
H
#6 x 3/4" Brass Flat Head Screw (inserted)
20
I
#6 x 1/2" Philtruss Screw (inserted)
6
K
#8 x 1" Pan Head Screw (inserted)
4
L
#8 x 1-1/4" Pan Head Screw (inserted)
6
M
#8 x 7/8" Black Lo-Profile Screw (inserted)
13
N
#8 x 1-3/4" Pan Head Screw (inserted)
8
O
#8 x 1-5/8" Black Screw (inserted)
8
Q
#8 x 1-5/8" Machine Screw Tuscan (installed)
2
S
1/4" x 20mm Insert Nut (inserted)
4
T
5/32" x 10mm Insert Nut (inserted)
2
U
Black Walnut Pull (attached)
1
V
Front 4-Hole Bracket (attached)
2
W
Back 6-Hole Bracket (attached)
2
X
Small Adjustable Glide (installed)
4
Y
#8 x 1-3/8" Lo-Profile Screw (inserted)
12

1114DUETa 1-Drawer Addison Nightstand
Assembly Instructions
1114DUETa —Page 3 —08/18
Tool Required: Phillips Screwdriver
1. Remove screws from the plywood supports and side aprons. Recycle or discard. See Figure 1.
2. Place the unit at its final destination. Rotate the Small Adjustable Glides (X) on the bottoms of
the legs until the unit is level. See Figure 2.
Fig. 2
X
X
Fig. 1
Plywood Supports
Fig. 1