InLife XC318 User manual

OPERATING INSTRUCTION
Bluetooth Body Scale
Read this instruction carefully before using

This production is available for ordinary weight measurement, not for other function.
It won’t achieve the desired performance if you used product beyond specified temperature and
moderate range.
Lie the product on the hard and level ground.
Keep your feet naked and wear thin clothes in sure of the accurate results.
1. Lie the product on hard level ground, it will work when you sit on.
6. Users can view the history of any data by pressing any index on the interface.
The product can only measure weight when disconnect with the phone.
4. The data is sent to APP, and it shows the user’s weight.
5. Press the middle circle platform, users can check the analysis details of
BMI/fat-moisture/mass-index/bones percentage and calorie consumption, etc.
2. On the LCD screen, the shining bluetooth means it connects APP successfully
3. When bluetooth connects successfully, users stand on the metal electrode slice
with feet naked, the APP will show the user selection interface when the weight
number is steady and press the middle confirm button, and then choose user name.
Stand still on the product.
Do not put product on soft materials, soft floor,carpet or spring pad.
Don’t use product on wet-slippery areas avoid slip,fall,breakdown due to water intake.
Wet body is prohibited when using the product, and keep body dry after bathing.
Do not stand on the edge, jump up to or on the product for fear of slip or turnover.
When throw it away according to relevant laws, do not disassemble or discard.
Do not bend your knees or sitting for fear of error measurement when you use it.
Attention List
Product Lists
Using Methods
Manual Operation
Product Info.
Before Using
Ⅰ.Battery assembling
Ⅱ.Unit choosing
Ⅲ.APP loading
1. Product: 1 set 2. Production Instruction: 1pcs
Our product has 3 weight units, follow below directions, change the unit button to choose lb/kg/st.
Scan to Load APP
Scan the right two-dimension codes to load and install APP .
1. open battery cover following arrow direction
2. set battery in the hole according to “+” and “-”
3. close the battery cover
Notes：
1. 3pcs AAA 7# alkaline batteries are suitable
2. replace whole batteries when product is in low electricity while using
Notes：
1. reset the unit before first-time using or after replace the batteries
2. automatically change to kg: factory default unit ;after replace batteries
3. unit conversion: 1kg=2.2046 lb 1st=6.35 kg
Notes：
1. Android edition supports Android 4.3 or higher
2. iPhone edition can load the APP in APP store
1. When first use or move the product, lie it on hard level ground,and then use
product after screen shows “0kg” .
Notes：
2. The product uses bluetooth low energy consumption technique
suitable edition:
iOS: iPhone 4s/5/5c/5s/6/6 plus/6s/6s plus/iPad Mini/the new iPad etc.
Android: Android 4.3 or higher system edition and support 4.0 bluetooth technique
Item
Name
Temperature：0~40°C
Moisture：≤90%RH
Pressure：80kPa~106kPa
Temperature：-20~60°C
Moisture：≤90%RH
Pressure：50kPa~106kPa
Temperature 25±5°C
0.0~50.0kg
50.0~100.0kg
100.0~180.0kg
±0.4kg
±0.5kg
±0.6kg
Bluetooth Body Scale XC318
280*240*25mm
1.3kg
3pcs AAA 7# Alkaline batteries
LCD Backlight Screen
5.0~180.0kg
0.1kg/0.2lb
lb/kg/st
Size
Net Weight
Power
Display Mode
Unit
Weigh Range
Accuracy Standard
Work Condition
Storage/Transportation
Condition
Division Value
Description
Production Instruction