InMotion inM497 User manual

9.7” LED Monitor Manual
inM497

inM497-1
1
Introduction and Package Contents
Introduction
Congratulations on your purchase. You can expect only the
sharpest and most brilliant color images from this monitor.
Featuring easy to use OSD controls and built in speakers, you will
find this monitor both easy to use and a pleasure to look at.
Package Contents
x9.7” LED Monitor
x12V DC Adapter
xD-Sub 15-pin VGA connector Cable
xUser's Guide
Hardware Installation
The following sections in this guide give clear, step-by-step
descriptions of the installation process and explain how to use
the monitor for optimum results.
Please pay attention to the Regulations and Warnings Section of
this user’s manual before setting up the display monitor. Failure
to do so may inadvertently result in personal injuries or machine
damage.
ġġġġġġġġġġġġġġġġġġġġġġ

inM497-1
2
Specifications
Model inM497
General ġ
ġ
ġ
ġ
Diagonal size 9.7"
Panel type Active Matrix TFT
Aspect ratio 4:3
Number of pixels 1024 x 768
Pixel pitch 0.192 x 0.192 mm
Color depth 262K Colors
Backlight LED
Optical (typ.)
ġ
Brightness 400 cd/m2
Contrast ratio 1,000 : 1
Response time ( Tr + Tf) 4ms
Viewing angle Vertical -89°~89° / Horizontal -89°~89°
Operation
ġ
Input Interface BNC x 2, VGA x 1, HDMI x 1
Output Interface BNC x 2
Display mode Video 1 / Video 2 / PC / HDMI
OSD Picture Mode, Contrast, Brightness, Color, Tint, Sharpness, Color Temp, DNR
OSD Languages English, German, French, Italian, Spanish, Russian, Turkish, Polish, Dutch, Czech
Speaker YES
Composite Video
ġ
System PAL / NTSC
Video processing Motion Adaptive 3D De-Interlace and DNR, 4H Comb filter Y/C separation
Electrical
ġ
AC power AC 100-240V 50/60HZ
Power consumption 15W Max. in “ON” Mode Under 0.5W in Power Saving Mode (100 VAC)
Under 0.5W in Power Saving Mode (240 VAC)
Power supply External power adapter
Mechanical
ġ
Case material Metal
Color Black
Dimensions ( W x H x D) 223 X 196.4 X 47mm
Support Wall mount
Net weight 1.9 kg
(Monitor & Rack mount)
Environment
ġ
Temperature Operation: 0°~40°C(32° ~104°F) , Storage: -10°~60°C(14° ~140°F)
Humidity 10%-90%
Standards
ġ
Safety FCC, CE, ROHS
Pixel defect policy ISO13406-2 Compliant, LCD panel class 2
Delivery set Monitor, Adapter, VGA cable, User Manual

inM497-1
3
VGA Timing
Item Resolution H Freq.(kHz) V Freq.(Hz) Note
1 640x400@70 31.460 70.080
2 640x480@60 31.469 59.940
3 640x480@72 37.861 72.809
4 640x480@75 37.500 75.000
5 720x400@70 31.460 70.080
6 800x600@56 35.156 56.250
7 800x600@60 37.879 60.317
8 800x600@72 48.077 72.188
9 800x600@75 46.875 75.000
10 1024x768@60 48.363 60.004
11 1024x768@70 56.476 70.069
12 1024x768@75 60.023 75.029
Remark:
The timing with presetting are recommended.
Users have to adjust the timing manually. If it is not included in the presetting list

inM497-1
4
MSA
Menu Select -
+
Auto Power
-
Monitor and OSD Control
Monitor and OSD Control
The LED color monitor has a simple control layout for controlling
the monitor and OSD (On Screen Display) functions. The table
below summarizes the control keys and their related functions.
6-Key feature
Keys Function Description
Power Toggle the display between standby mode and on.
(
Press “Power” and wait 6 sec., monitor will display
)
A / Auto Automatically adjusts H-Position, V-Position, Pixel Clock
and Phase for an optimal ima
g
einPCmodeonly.
Switch setting item.
Decrease the value of the chosen item.
Switch setting item.
Increase the value of the chose item.
S / Select Switch mode “PC”, ” HDMI ”,”AV1”, ”AV2”.
M / Menu Enter the main menu of the on-screen display (OSD).
LED Status Display
The following table describes the various power states of the LED
monitor as represented by different LED color.
Power State LED Color
On Green
Standby Red
No power Blank
+

inM497-1
5
OSD Menu
Picture Mode
1. Picture Mode Press -/ OR +/ to select the picture mode
“User, Standard, Movie, Vivid ”
2. Contrast This is used to set the brightness of the screen.
Press -/ OR +/ to ad
j
ust the parameter.
3. Brightness This is used to adjust the image contrast.
Press -/ OR +/ to ad
j
ust the parameter.
4. Tint This is used to adjust the image Tint.
Press -/ OR +/ to ad
j
ust the parameter.
5. Saturation This is used to adjust the image saturation.
Press -/ OR +/ to ad
j
ust the parameter.
6. Sharpness Adjust the sharpness. It makes the image become soft.
Press -/ OR +/ to ad
j
ust the parameter.
7. Color Temp. Press -/ OR +/ to adjust the color tones.
“ Cool , Warm , Normal “
8. DNR Press -/ OR +/ to adjust the noise reduction.
“Hi
g
h , Low, Off, Mid “
Note: VGA Mode: Contrast, Brightness, Color Temp., Auto Adjust.
Sound Mode
OSD Control Function List

inM497-1
6
Setting Mode
1. Language Press -/ OR +/ to select language.
2. H. Position Move the display picture left or right.
Press -/ OR +/ to ad
j
ust the parameter.
3. H Zoom Adjust the H-size of the display picture
Press -/ OR +/ to ad
j
ust the parameter.
4. V Position Move the display picture up or down.
Press -/ OR +/ to ad
j
ust the parameter.
5. V Zoom Adjust the V-size of the display picture
Press -/ OR +/ to ad
j
ust the parameter.
6. Clock Press “ ”OR “ ”toad
j
ust the parameter.
7. Phase Press “ ”OR “ ”toad
j
ust the parameter.
8. Scale Mode Adjust the V-size of the display picture
Press -/ OR +/ to ad
j
ust “ Full, 16:9 ”.
9. Reset Recall Default value.
Note: “ Clock” and “Phase ” settin
g
only in VGA Mode
PIP/POP Setup Mode
1. Multi Window Press -/ OR +/ to select “PIP, POP, Off ” mode.
2. Sub Source Press -/ OR +/ to select “AV, VGA” mode.
3. Size Adjust the size of Sub Source window.
Press -/ OR +/ to select “Lar
g
e, Small ”
4. Position Move the position of Sub Source window.
Press -/ OR +/ to select “L U, R D, R U, L R” position.
5. Border Color Choose the border color of Sub Source window.
Press -/ OR +/ to select “Black, Blue” color.
6. Sound Source Press -/ OR +/ to select “Main, Sub” mode.
7. Swap Press S/Select to Swap the Source of Main and Sub.
Note:
1. AV1 and AV2 , HDMI and VGA cannot be displayed at the same time on the
monitor in PIP / POP mode.
2. If POP mode is selected both images are scaled to fit the screen.
VGA Mode
AV/HDMI Mode
PIP
POP

inM497-1
7
Caring for your LED Monitor
The LED color monitor is a sensitive piece of electronic
equipment. Proper care can prevent accidentally damaging
the LED panel or the monitor itself. By following these guidelines
you can ensure many years of trouble free use.
1. The LED monitor's metal casing and LED glass panel can be
cleaned with a soft, lint-free cloth. Never use scrub pads or
other cleaning materials with abrasive surfaces to clean your
LED monitor!
a. A slightly damp cloth or newspaper may be used to
clean the glass plate of fingerprints or smudges.
b. For the metal case, a mild detergent may be used to
clean the surface. However, you should ensure not to
use too much detergent or water as this could leak into
the interior of the casing.
2. Do NOT use cleaning fluids based on alcohol, methylated
spirit, or ammonia. The glass plate has a hard surface coating
to prevent scratches. However, the use of strong chemical
cleaning agents may damage this coating. Use only a mild
soap or detergent and water or specially formulated cleaners
made for cleaning glass panels.
3. Avoid direct contact with water or other liquids. Never use
the LED monitor in or around areas where water may pose a
potential hazard to normal operation.
4. Only use the LED monitor indoors, and avoid monitor contact
with oil, vapor, steam, moisture and dust. The LED monitor
should be used in a clean and low humidity environment.
5. Keep the LED monitor away from heaters or other heat
sources such as lighting equipment or direct sunlight.
6. Keep the LED monitor away from sharp object. Do not touch
the screen with fingernails and pencils, etc.
WARNING: Any unauthorized modification to this equipment
could result in the revocation of the authorization to operate the
equipment and void the product warranty.
4 Caring for Your LED Monitor

inM497-1
8
Frequently Asked Questions
Power button does not respond
xCheck the power cord to ensure that it is securely plugged
into the monitor base and also into the electrical outlet.
xEnsure there is electrical power coming from the AC outlet.
Use another device to check for power.
xUnplug the power cord of the monitor from the AC outlet;
wait a few minutes, then to plug the power cord into the AC
outlet again. This will reset the monitor and power supply.
No image on the screen
xEnsure that the DB-15 signal cable is properly connected to
the display card/computer.
xCheck the DB-15 signal cable connector on both ends for
bent or pushed-in pins.
xThe display card should be properly seated in its card slot.
xEnsure that the computer's power switch is ON.
xEnsure that the monitor's power switch is ON.
xUnplug the power cord of the monitor from the AC outlet;
wait a few minutes, then to plug the power cord into the AC
outlet again. This will reset the monitor and power supply.
Power LED is RED (with no image on the screen)
xCheck the DB-15 signal cable to ensure that it is properly
attached to the graphics display card.
xCheck the DB-15 signal cable on both ends for bent or
pushed-in pins.
xMake sure the computer is not in a power-saving mode
(move the mouse or press a key on the keyboard).
No sound coming from the audio speakers
xThe audio cable should be connected to the lineout on the
audio card and the line-in on the monitor. Ensure that the
audio cable is properly connected.
xInspect the audio cable for any apparent damage. Double
check by switching to another audio cable to see if the
audio works.

inM497-1
9
Regulations and Maintenance
FCC compliance
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) this device may not
cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause
undesired operation.
NOTE: This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential
installation. This equipment generation, uses and can radiate
radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following
measures:
xReorient or relocate the receiving antenna.
xIncrease the separation between the equipment and
receiver.
xConnect the equipment to an outlet on a circuit different
from that to which the receiver is connected.
xConsult the dealer or an experienced radio/TV technician
for help.
Precautions
点Read all of these instructions and save them for later use.
点Follow all warnings and instructions on the product.
点Product
-Do not cover or block the vent holes in the case.
-Do not insert sharp objects or spill liquid into the LED monitor through cabinet
slots. They may cause accident fire, electric shock or failure.
-Disconnect the power plug from the AC outlet if you will not use it for an
indefinite period of time.
-Do not attempt to service this product yourself, as opening or removing covers
may expose you to dangerous voltage potentials or other risks.
-Do not touch the screen directly with your fingers. You may damage the screen,
and oil from your skin is difficult to move.
-Do not apply pressure to the screen. The LED is very delicate.

inM497-1
10
点Power
-Use the type of power indicated on the marking label.
点Plugs
-Do not remove any of the prongs of the monitor’s three-pronged power plug.
-Disconnect the power plug from the AC outlet under following conditions:
˖If you will not use it for an indefinite period time.
˖When the power cord or plug is damaged or frayed.
˖If the product does not operate normally when the operation instructions are
followed. Adjust only those controls that are covered by the operating
instructions. Improper adjustment of other controls may result in damage and
will often require extensive work by a qualified technician to restore the
product to normal operation.
˖If the product has been dropped or the cabinet has been damaged.
˖If the product exhibits a distinct change in performance, indicating a need for
service.
点Power and extension cords
-Do not allow anything to rest on the power cord.
-Do not locate this product where persons will walk on the cord.
-Use the proper power cord with correct attachment plug type. If the power
source is 120 V AC, use a power cord that has UL and C-UL approvals. If the
power source is a 240 V AC supply, use the tandem (T blade) type attachment
plug with ground conductor power cord that meets the respective European
country’s safety regulations, such as VDE for Germany.
-Do not overload wall outlets or power cords. Ensure that the total of all units
plugged into the wall outlet does not exceed 10 amperes.
-Ensure that the total ampere rating of all units plugged into the extension cord is
not over the cord’s rating.
-If the power supply cord, which came with your monitor, is to be connected to
the PC instead of the wall outlet, this equipment is to be used with UL/TUV
approved computers with receptacle rated 100~240V AC, 50/60Hz,
2.0A(minimum).
点Environment
-Place the monitor on a flat and leveled surface.
-Place the monitor in a well-ventilated place.
-Keep the monitor away from:
Extremely hot, cold or humid places, places directly under sunlight, dusty surroundings,
equipment that generate strong magnetic fields.