Innov HDC-WF1080A User manual

Thank you for purchasing this HD CCTV Camera. Please read these
instructions carefully for a thorough understanding of how the cameras oper-
ates.
1.Operating requirements
1.1 Before using the camera ,please read this manual carefully and keep it
safely for later use.
1.2 Installation should be proceed by professional service and follow manu-
facturer’s instructions, do not dismantle without authorization.
1.3 In order to prevent sensor ,do not expose lens to intense light source in
long time.
1.4 Do not touch sensor directly. Please covers the dustproof cover when the
camera is not being used.
1.5 Please use a dry soft cloth to clean the camera. If dirt difficult to clean,
use detergent with water and wipe dry the camera.
1.6 Do not install camera under air conditioning’s air gate ,or else lens blur
with condensation of moisture.
1.7 Please ensure that all electric power sources are turned off when not
open , installation ,clean, etc operation.
1.8 Please transporting , using and storing the camera in allowable tempera-
ture and humidity.
1.9 If the camera was broken, for example power cord or plug dam-
aged ,splash liquid or foreign matter fall into camera, raining ,wetting ,etc
can’t work situation ,please contact manufacturer or maintenance center
(modify and maintenance without permission ,you must be responsible
for the problems)
2.Statement
2.1 All photos here are for reference only .Specifications are subject to physi-
cal product.
2.2 This manual is subject to change without further notice.
2.3 Please contact with customer service for the newest procedures and sup-
plementary specification.
2.4 This manual list several model numbers for reference , please user accord-
ing actual product to operating.
2.5 We will do the best to keep this manual complete and accurate, but some
data may has deviation. If any doubt or dispute ,company retain the final
right of the product.
HD CCTV CAMERA
USER MANUAL
INTRODUCTION:
This camera which has 2.1M Pixes is specially designed for security monitoring. It
applies the latest 2.1M Pixes progressive scan CMOS. It is a heavyweight new-
designed HD camera which applied DC12V and support user customize the output
parameter settings.
Feature
■ ACCE ( Adaptive Color & Contrast Enhancement)
■ NTSC/PAL Selectable
■ RS485
Specification
Imaging Sensor 1/3" Panasonic COMS(MN34041PL)
Scanning System Progressive Scan
S/N Ratio More than 50dB (AGC Off)
Video Output Mode 1080P(1920 X 1080)
Video Output Level HD-SDI /1.0 Vp-p (75Ω，Composite)
Lens 2.8-12mm Motor Zoom Lens
Min. Illumination 1.0Lux(Color),0.5Lux(BW)
IR Distance 40M(with ￠5X36PCS LED)
OSD Built-in(RS485 Control)
Electronic Shutter AUTO/MANUAL(1/50~1/60,000 sec)
AGC 0-20steps
WDR/BLC WDR/BLC/HLC/OFF
Digital Zoom On/Off(1.0x-8.0x)
D-DFFECT Flip/Mirror/D-Zoom
Voltage/Current DC12V+10% / 180mA(450mA with IR ON)
Operating temperature -10°~ +50°C
Dimension (mm) 320(L) X 94(W)X85(H)
Weight (g) 860g
Safety Instruction
Application method
1 2
3 4
NO. Name Model Number
1 Camera HDC-WF1080A 1
2 Screws — 3+1
3 Plugs — 3
Packing List
Wire ports

OSD MENU
EXPOSURE ■BRIGHTNESS
■AGC
■SHARPNESS
■LENS
■COLOR GAIN
■SHUTTER
■GAMMA
■DSS
AWB ■AUTO ■AUTOext ■PUSHING ■MANUAL
WDR/BLC ■HLC ■BLC ■WDR ■OFF
3D DNR ■LOW ■MIDDLE ■HIGH
IMAGE ■MIRROR
■SHADING
■FLIP
■PRIVACY
■D-ZOOM
■MOTTON
■D-WDR
■RETURN
SYSTEM
■PROTOCOL
■FRAME RATE
■IMAGE
RANG
■CVBS
■OUTPUT
MODE
■RESET
■COLOR SPA
CE
■RETURN
EXIT
Function Menu
How to use the camera
EXPOSURE
►BRIGHTNESS: Adjust the brightness of the image.
►SHARPNESS: Adjust the sharpness of the image.
►COLOR GAIN: Adjust Color.
►GAMMA: Adjust gamma control setting.
►AGC: You can adjust it LOW,MIDDLE and HIGH level. The
higher the gain level, the brighter the screen but the higher the
noise.
►LENS: Normal/Deblur Choice.
►SHUTTER: MANUAL/AUTO.
* MANUAL:1/25-1/60000
* AUTO: Select this mode to control the shutter speed
automatically. Shutter speed is automatically controlled
►DSS: Digital slow shutter.
AWB
►AUTO: automatic white balance.
►MANUAL:manual white balance.
WDR/BLC
*HLC: High Light Compensation .
*BLC: Back Light Compensation Control.Area set (size & po-
sition).
*WDR:The scene is especially light parts and special dark parts
at the same time can see very clearly
3D-DNR
*This function reduces the background noise in a low luminance
environment.
IMAGE
►MIRROR: you can flip the image horizontally.
►FLIP:you can flip the image vertically.
►D-ZOOM: 1.0X-8.0X.
►D-WDR: Digital wide dynamic.
►SHADING: LENS Shading.
►PRIVACY:Hide an area you want to hide on the screen.
►MOTION:ON/OFF.
SYSTEM
►PROTOCOL: RS485 Address/Baudrate/Protocol set up
►IMAGE: CRT monitor and LCD monitor.
►OUTPUT MODE: Select 1080P/720P.
►COLOR SPACE: Select HD-CbCr/YUV/SD-CbCr.
►FRAME RATE: Select 25/30/50/60FPS.
►CVBS: Select NTSC/PAL.
►RESET: Resets the camera setting to the factory defaults.
EXIT
►EXIT: Press the ENTER button in the EXIT menu to save the
current settings and exit the MAIN SETUP menu.
5 6
7 8
RS485
Address:1
Baudrate:9600
Protocol:Protocol P