Charging time:
The first time to charge the battery completely. It normally takes 2 hours. When fully charged, the
red LED light goes out. Hold the multifunction button for 4 seconds to open the headset. See the next
sections "Startup and Shutdown" iX‐B22.
Working on Standby time
Completely fully charged battery, when connected to headphones the working time is 3 hours. When
connected to speaker (this product works without the amplifier), working time is 6 hours, standby
time is 140 hours.
Power is low
When the headset is turned on and when the power is low, the red LED indicator light flashes and
makes a "beep" sound three times every 30 seconds. Follow these steps to charge the battery.
Turn on
Press the MFB for 4 seconds until you hear the beep sound. The blue LED light flashes 3 seconds.
Turn off
Press the MFB for 4 seconds until you hear the beep sound. The red LED light flashes 3 seconds and
then goes out.
Pairing to mobile phone
1. Put this unit and mobile phone together. The best distance is within 1 meter.
2. Make sure the unit is turned off.
3. Press the MFB till the blue and red LED light flash alternately
4. Turn on the mobile Bluetooth function according to the user manual of subject mobile phone
5. Using the mobile to search this unit, then choose the pairing name "BTI‐005"
6. Enter the pass key "0000", then this unit will connect with mobile, when you see the red light
of the unit flash once and hear one beep sound. That means this pairing is successful. You
can listen to music through this unit.
Pairing with Bluetooth Audio Transmitter
Firstly plugging this USB Bluetooth dongle into PC, then put this unit into pairing status (red and blue
LED light flash alternately), using PC to search this unit (BTI‐005), when the PC discovers it, please
enter the pass key (0000) for connection. When the pairing is successful then turn on the music
player, you can listen to music through this unit.