INOLAV IC7049 User manual

Measuring
tape
Power drill
Phillips
screwdriver
Pencil
B
Hanging system
Adjusts height of vanity
Finished Wall
Wood
Re-enforcement
29 1/2"
Suggested
F
G
A
D
INSTALLATION INSTRUCTIONS IC7049-
A
x 1 Adams cabinet
B
x 4 Wall bracket
Re-enforce the wall using a sheet of
plywood or 2" by 6"wood beams.
1 2
Measuring for the desired height,
secure all four wall brackets (B) to
the wall. Make sure that screws (C)
go into the re-enforced area of the
wall. 29.5" to the top screw is the
recommended height.
3
Remove drawer from ADAMS cabinet
(A). See drawer removal below.
4
Hang cabinet (A) onto wall brackets (B) and adjust
hanging system as shown below.
Secure cabinet (A) to the wall using long screws (D). Make
sure to drive screws (D) into re-enforced area of the wall.
5
C
x 12
Medium
size
screw
TOOLS REQUIRED
Finished view
D
x 3
Long
size
screw
D
x 15
Anchors
(Discard
anchors for
installation in
the USA. Use
wood re-
enforced walls
instead.)
Adjusts distance
to wall