NATHAN JAMES Jacklyn 67201 User manual

Jacklyn Bookcase
Let’s build the
23-0217
Scan me!
Free Lifetime
Warranty
75
7
5
M
I
N
U
T
E
A
S
S
E
M
B
L
Y
SKU 67201

2
This should be easy, just follow
our instructions and you will be
back to Netflix in no time.
Ok, let’s
get rolling
What’s included
What you need
• Some of your favorite bubbly
or your preferred relaxant
• Use the packaging carton as
a working surface to prevent
product damage during assembly
• Phillips head screwdriver
• Drill with 5/16” or 1/4” drill bit
Description Qty
ATop Frame Support
(with wall mount plate) 2
B Bottom Frame Support 2
C Open Shelf 3
D Left Back Side Panel 1
E Left Front Side Panel 1
F Right Back Side Panel 1
G Right Front Side Panel 1
H Back Panel 1
I Top Panel 1
J Bottom Panel 1
K Adjustable Shelf for Cabinet 1
L Door Panel 2
75:00
Estimated time for assembly
75
lbs shelves &
cabinet top
Weight Limitation
Toll-free at 1-866-619-1004
[email protected]
Nathanjames.com/help
Scan me!
Free Lifetime
Warranty
33
lbs adjustable shelf
& cabinet bottom

3
The goods
IMPORTANT
1. Do not tighten bolts / screws completely until all bolts / screws are lined up and
inserted into holes.
2. Do not over tighten screws and bolts to avoid stripping.
A
A
B
L
J
E
D
H
K
F
I
C
C
C
G
L
B

4
What’s included
Description Qty
1 M6*15mm Bolt 12
2 Handle 2
3 M6*30mm Cam Bolt 4
4 15*9.5mm Cam Lock 4
5 M4*40mm Screw 4
6 M4*12mm Screw 4
7 M4.2*32mm Screw 4
8M6*30mm Non-Drywall
Anchors 4
98*30mm Wooden Dowel 16
10 M4*14mm Screw 16
11 Hinge 4
12 Allen Key 1
13 Shelf Pin 4
14 Drywall Anchor 4
15 M4.2*50mm Screw 4
1
5
13
9
2
6
14
10
3
7
15
11
4
8
12

5
3
3
3
I
3
9
It’s as easy as it looks! Screw four
M6*30mm Cam Bolts (3) into the
allotted slots on the Top Panel (I).
Step 1
Step 2
3
Next, insert the 8*30mm Wooden
Dowels (9) into the edges of the Left
Back Side Panel (D), Left Front Side
Panel (E), Right Back Side Panel (F),
and Right Front Side Panel (G).

6
Next, slide the Left Back Side Panel
(D), Left Front Side Panel (E), Right
Back Side Panel (F), and Right Front
Side Panel (G) into place on the Top
Panel (I) so the cam bolts align with
the holes..
Once in place, insert the 15*9.5mm
Cam Locks (4) into the holes and
twist to lock into place.
Next, slide the Back Panel (H)
in place. Once in place, secure
the Bottom Panel (J) to the
rest of the cabinet using the
M4*40mm Screws (5).
Step 3
Step 4
4
5

7
Now assemble the Top Frame Supports (A) to the Bottom Frame Supports (B) by sliding
them together and using the M6*15mm Bolts (1) to secure in place.
You’re over halfway there! And doing beautifully, we might add. Now it’s
time to slide the assembled Frame Supports (A)(B) into the notches in the
cabinet and Open Shelves (C). Secure in place using the M6*15mm Bolts (1).
Step 5
Step 6
1
1
12
12
A
B
x2
11

8
Next, grab a friend and gently place the
bookcase into an upright position.
Step 7

9
Now it’s time to secure to secure this puppy
to the wall!
If your walls are drywall, use the Drywall
Anchors (14) and the M4.2*50mm Screws (15)
to secure the bookcase to the wall.
If your walls aren’t drywall, use the Non-
Drywall Anchors (8) and the M4.2*32mm
Screws (7) to secure the bookcase to the wall.
Flip ahead to see
detailed instructions
for using wall anchors.
Step 8

10
Step 8 (cont.)
Non-drywall application
Mark it
Choose your desired location on the wall, have
a friend hold the bookcase in place, and use a
pencil to mark where the anchors will go.
⁄” Drill bit
Move the bookcase to the side and,
following the marks you just made, use
a ⁄” drill bit to drill 2 holes into the wall.
Insert the anchors
Go ahead and tap the wall anchors into place
in the new holes you just drilled. If you’re
feeling strong, just push them into place.
All about the angle
Insert 1 screw through each metal bracket and
into the wall anchor. Tilt your Phillips head
screwdriver, and secure but do not overtighten.
8
8
7

11
Step 8 (cont.)
Drywall application
Mark it
Choose your desired location on the wall, have
a friend hold the bookcase in place, and use a
pencil to mark where the anchors will go.
⁄” Drill bit
Move the bookcase to the side and,
following the marks you just made, use
a ⁄” drill bit to drill 2 holes into the wall.
Insert the anchors
Go ahead and tap the wall anchors into place
in the new holes you just drilled. If you’re
feeling strong, just push them into place.
All about the angle
Insert 1 screw through each metal bracket and
into the drywall anchor. Tilt your Phillips head
screwdriver, and secure but do not overtighten.
14
14
15

12
Step 8 (cont.)
How to use drywall anchors

13
13
You’re almost done! We
made this step easy, don’t
worry.
Insert the Shelf Pins (13)
into the desired holes in
the cabinet. Once inserted,
slide the Shelf (K) into
place. In order to fit the
shelf inside the cabinet,
you will need to tilt the
shelf to angle it in properly.
Step 9

14
Now it’s time to assemble the doors. Place the Hinges (11) into the Door
Panels (L). Secure in place using the M4*14mm Screws (10). Repeat
this same process on the inside of the cabinet where the doors attach.
Then, secure the Handles (2) in place using the M4*12mm Screws (6).
Step 10
10
6
2
11
10
11
11
L
L
L
2
2
6
6
10
10
10 11
10
6
6
10
10 10

15
Then you’ve come to the right place. Follow the illustrations
below to get your cabinet door aligned and ready for action.
Loosen the height screws, then move the door up or down to make it level.
Loosen the side-to-side screws, then screw counter-clockwise to make
the gap wider or clockwise to close any gaps.
Adjust the in-and-out screws until the door is aligned with the side of the cabinet.
If your door is too low or too high…
If the space between your doors is o…
If you need to adjust the depth of the doors…
Is your cabinet door looking
crooked or unevenly spaced?

16
To adjust the height of the cabinet shelf
position, simply remove all of the metal
pins on either side, move the pins to the
desired hole height, and replace the shelf.
And that’s it, your new bookcase is
complete!
Step 11

17
Give us a call 1-866-619-1004 or shoot us a message
at [e-mail] we will issue you a free
replacement with zero hassle.
We really don’t want you to go through the hassle of re-packaging your item
and sending it back, because let’s be honest…nobody has time for that.
No heartburn,
when we handle the return
Our way Their way
Give us a call
Replacement
Replacement
You
Re-package item
Schedule pick up
Track package
You

18
We want your product to last as long as possible, so we recommend that you
tighten the screws 2 weeks after assembly and for added safety check the
tightness of all screws every 2 months.
For proper care and treatment, please check our website
at NathanJames.com/products
DO NOT use for commercial purposes
DO NOT frolic on bookcase
DO NOT use bookcase as foot stool
DO NOT leave spilled liquid on bookcase
DO NOT use bookcase if damaged
DO NOT make temporary repairs
DO NOT use outdoors
Proper use
Safety rst, fun later
Safe use of this product
starts with you.
Use this product responsibly with the primary
concern for your safety. Follow assembly
instructions carefully and inspect product upon
receipt and each use.
Nathan James and its parent companies cannot
be held legally responsible for any injuries or
death resulted from failure to follow instructions
or improper use of this product.
Do not modify the
structure of this
product in any way.
Our products have been tested to meet specific
safety measures as they were originally
intended to be sold. Any modifications will
present the risk of creating significant safety
issues which NJ will not be responsible for.

19
Brooklyn Burdon
Founder, Nathan James
Did we do alright? Please spread the love!
If you are happy with your product, tell your friends
and family about us or even better leave us a review
online. Spreading the word gives us the opportunity
to make more people happy and keep our
prices low for your next purchase.
We are only in business
if you’re happy
For starters, thanks for being you.
Toll-free at 1-866-619-1004
[e-mail]
NathanJames.com/help
We do our best to ensure your furniture arrives without any problems, but occasionally mistakes
happen—as humans we are imperfect beings. In the event that a part is damaged or missing, we
will be more than happy to provide you with replacement part(s) for free.
Warranty
This product comes with a lifetime warranty from the date of purchase. Please use your phone to
scan the QR code to register your product or visit https://goo.gl/i9dk3q