Arrow Shirley Caddy 445 User manual

ASSEMBLY INSTRUCTION
S hirley C addy
ITEM N o.: 445 T eak
44 1 White

LIMITED WARRANTY
Arrow™ Sewing Furniture 10-Year Warranty
WHAT THIS WARRANTY COVERS: Arrow Companies, LLC (Arrow) provides limited warranty coverage to the original
purchaser of this product against defects in materials or workmanship of Arrow furniture components for a period of
ten years from the date of purchase. As used in this Warranty, “defect” means imperfections in components which
substantially impair the utility of the product. This Warranty gives you specic legal rights, and you may also have
other rights which vary from state to state.
HOW TO GET SERVICE: Simply contact Arrow at 1-800-533-7347 or [e-mail]. When you request
warranty service, you must also present proof of purchase documentation, which includes the date of purchase
(detailed receipt), and photos of the product. Arrow will replace any defective part (at its sole option), excluding labor.
Replacement parts will be warranted for only the remaining period of the original Warranty.
Replacement parts will be shipped freight prepaid on any initial warranty claim during rst year of Warranty only.
Warranty applies only to defects conrmed by Arrow Companies, LLC and will be replaced or repaired at Arrow’s
option. In the event parts are no longer available for a warranty claim, customer may receive brand new cabinet at a
price equal to 60% o the MSRP of a current comparable model.
WHAT’S NOT COVERED: There is no warranty coverage for defects or conditions that result from the failure to follow
product assembly instructions, information or warnings, misuse or abuse, intentional damage, re, ood, alteration or
modication of the product, or use of the product in a manner inconsistent with its intended use, nor any condition
resulting from incorrect or inadequate maintenance, cleaning, or care, or neglect, cuts or scratches. Caster damage
as a result of moving furniture fully loaded or with locked casters. Damage resulting from electrical surge or lightning.
Use in commercial or education environments. Arrow Sewing Furniture is designed for residential use only.
ARROW SHALL HAVE NO LIABILITY for ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES OF ANY KIND and all such
damages are EXCLUDED FROM THIS WARRANTY, such as loss of use, disassembly, transportation, labor or damage
to property on or near the product. Some states do not allow the exclusion or limitation of incidental or consequential
damages, so the above limitation or exclusion may not apply to you. The Warranty cannot be transferred to subsequent
owners or users of the product, and it shall be immediately void in the event the product is resold, transferred, leased
or rented to any third party or person other than the original purchaser.
ADDITIONAL LIMITATIONS:
THERE ARE NO OTHER WARRANTIES APPLICABLE TO THIS PRODUCT. Under the laws of certain states, there
may be no implied warranties from Arrow and all implied warranties, INCLUDING ANY IMPLIED WARRANTY OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE are disclaimed where allowed by law. TO THE EXTENT
ANY IMPLIED WARRANTIES ARE APPLICABLE, ANY IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTY
OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED IN DURATION TO THE DURATION
OF THIS EXPRESS WARRANTY or the minimum period allowed by law, whichever is shorter. Some states do not allow
limitations on how long an implied Warranty lasts, so the above limitation may not apply to you. This limited warranty
gives you specic legal rights. This limited warranty does not, in any way, aect the rights given to you by law.
REGISTER YOUR PRODUCT: Original purchaser should register the purchase online at www.ArrowCabinets.com/warranty.

Clockwise
Turning direction for attaching
place a small bit of WD-40 or
similar grease into the
pre-installed cam bolt holes to
help the cam bolts screw in
better as pictured above
Incorrect Incorrect Correct
X
1

PARTS LIST
  
  
  
z  
 
 
  
  
  
  
  
  
  
 
@   
  ® 

  
  
  
  
  
  
  
�  
 
  
  
 
  


STEP 1
Preparation for top panels A,left side panels X,right side panels Z,
panel G,K,K4,0
 
 
3

STEP 2
Panels X , Z and O assembly.
 

STEP 3
Bottom panel G assembly.
X
runner
screw
 
 
 
 
4

STEP 4
5mm Back panel

Back panel assembly.
STEP 5
Top panel A assembly.
 

5

STEP 6
Drawer assembly.
 
  
 
STEP 7
Drawer assembly.
6

STEP 8
Castors ® assembly.
  
STEP 9
7

STEP 10
Panel Y assembly.
  
8

You have now successfully completed the assembly
.