Insignia NS-CGDMBB2 User manual

IMPORTANT SAFETY INSTRUCTIONS
Choking Hazard
WARNING: This product may contain small parts which may be a choking
hazard to children under three years of age. Keep small parts away from
children.
Road Hazard
WARNING: Risk of severe injury or death. This product requires in-car
installation. Do not attempt to install or set up this equipment while your
vehicle is moving.
WARNING: Risk of severe injury or death. Do not install this equipment in a
way that it will obstruct the view of the driver. Some jurisdictions have
restrictions regarding the installation of after-market accessories. Consult and
obey the local laws and regulations.
Notices
• Insignia does not assume any responsibility for any nes, penalties, or
damages that may be incurred as a result of any state or local law or
ordinance relating to the use of your device.
• Do not install this or any product over an air bag cover or within the air bag
deployment zone. Insignia assumes no responsibility of liability for injury or
death as a result of car crashes or air bag deployment.
• Insignia is not responsible for any damages caused to your car, your device,
or yourself due to the installation or use of the mounts.
• This product is designed for a Garmin Nuvi GPS only. Do not use this
product with other type GPSs.
Before using your new product, please read these instructions to prevent any damage.
PACKAGE CONTENTS
• Car mount for Garmin Nuvi GPS
• Quick Setup Guide
FEATURES
• Works with a Garmin Nuvi GPS
• Weighted, non-skid, and secure
• Adjusts for customized viewing angles
• Bean bag design bends to the contour of your dashboard
QUICK SETUP GUIDE
Weighted
Dashboard Mount
NS-CGDMBB2
NS-CGDMBB2_19-0349_QSG_V1_EN_Final.ai 1 11/4/2019 2:41:26 PM

V1 ENGLISH 19-0349
PROBLEM
Will my mount t
any Garmin GPS?
Does my mount work
with a leather dashboard?
How do I attach my mount?
My mount lost its friction
and slides everywhere.
ATTACHING YOUR GARMIN MOUNT AND GPS
1 Place your Garmin mount on your dashboard. Your mount has a non-skid
design that holds it in place.
2Slide your GPS onto the pre-installed Garmin 17 mm adapter on your
mount.
3If needed, adjust the viewing angle by tilting your GPS up, down, right, or left.
The
adjustable arm has two swivel joints. You can adjust each joint by up to 90°.
ONE-YEAR LIMITED WARRANTY
Visit www.insigniaproducts.com for details.
CONTACT INSIGNIA
For customer service, call 1-877-467-4289 (U.S. and Canada) or
01-800-926-3000 (Mexico)
www.insigniaproducts.com
INSIGNIA is a trademark of Best Buy and its aliated companies.
Distributed by Best Buy Purchasing, LLC
7601 Penn Ave South, Richeld, MN 55423 U.S.A.
©2019 Best Buy. All rights reserved.
POSSIBLE SOLUTION
• Your mount works with Garmin Nuvi
GPS models. The Garmin Nuvi GPS
adapter comes pre-installed.
• Your mount works on any surface.
• Set your mount on your dashboard.
The non-skid design keeps it in
place.
• Try cleaning the non-skid surface
on the bottom of your mount with a
small amount of alcohol or a damp
cloth.
• Apply a coat of RTV silicone (not
included) or a piece of non-skid, RV
or camper shelving material (not
included) to the non-skid surface
on the bottom of your mount.
TROUBLESHOOTING
Garmin adapter
Base
Adjustable arm
NS-CGDMBB2_19-0349_QSG_V1_EN_Final.ai 2 11/4/2019 2:41:26 PM