Insignia NS-WBRDVD - Blu-Ray Disc Player User manual

Quick Setup Guide
NS-WBRDVD for Wireless Internet Connection
Connecting to a broadcasting wireless network
using DHCP
NOTE: The steps in this task are based on using the remote control that came with
your player.
To set up a network connection:
1Press ENTER. The Settings menu opens.
2Press or to select Network. The Network menu opens.
3Press , press or to highlight Wireless, then press ENTER.
A list of network options opens.
4Press or to highlight Network List, then press ENTER. The
Network List opens and shows the available networks. It may take
several seconds for this list to appear.
5Press or to highlight a network, then press ENTER. A list of
options opens.
6If your network is not using encryption or you have successfully
logged on the the network before, go to Step 15.
NOTE: If a network is using encryption, a closed lock icon appears next to the
network name. If you have successfully logged on to the network before, a saved
icon appears next to the network name.
Or,
If your network is using encryption, go to the next step.
7Press or to highlight Edit, then press ENTER. An edit screen
opens. The AdHoc and Name elds are already set correctly based
on data received from the wireless router.
Congratulations on your purchase of
a high-quality Insignia product. Your
Blu-ray Disc player has built-in Wi-Fi
that lets you connect your player to
the Internet to download BD-Live
content.
This guide includes two options for
conguring your wireless connec-
tion:
• Connecting to a broadcasting
wireless network using DHCP
• Connecting to a wireless network
using WPS (Wi-Fi Protected Setup)
NOTE: You only have to perform this
procedure once. The next time you
turn on your player, it will connect to
the network automatically.

ENGLISH 09-0820
© 2009 Best Buy Enterprise Services, Inc. All rights reserved. INSIGNIA is a trademark of Best Buy Enterprise Services, Inc. Registered in some countries. All other products and brand names are trademarks of their respective owners.
8Press or to highlight the Encryption eld, then press
ENTER. A list of encryption types opens.
9Press or to highlight the type of encryption used by
your router, then press ENTER. The edit screen reopens.
NOTE: If you do not know what type of encryption your router uses, log
on to your router and check the encryption setup. See the router
manual for instructions on how to do this.
10 Press or to highlight the Password eld, then press
ENTER. An on-screen keyboard appears.
11 Press , , or to highlight the rst letter in the
password, then press ENTER. Repeat this step to enter
the rest of the password. If you make a mistake, use
to delete the character.
12 After you enter the password, highlight , then press
ENTER to close the keyboard.
13 Press to highlight OK, then press ENTER. The Network
List reopens.
14 If necessary, press or to highlight the network again,
then press ENTER. The option list reopens.
15 Press or to highlight Connect, then press ENTER. If
the wireless network is working, you should see a and a
connected message on the TV. If the message does not
appear, your Blu-ray player is not connected to the network.
Repeat this task again.
Connecting to a wireless network using WPS
(Wi-Fi Protected Setup)
NOTE: The steps in this task are based on using the remote control that came
with your player.
To set up a network connection:
1Press ENTER. The Settings menu opens.
2Press or to select Network. The Network menu opens.
3Press , press or to highlight Wireless, then press
ENTER. A list of network options opens.
4Press or to highlight WiFi Protected Setup, then
press ENTER. The following screen appears.
5Press the button on top of your router. The following
screen should appear. When you see “Success” on the
screen, your player is connected to the router.
6Press ENTER to close the message.