Insignia NS-WBRDVD2 User manual

Quick Setup Guide
NS-WBRDVD2/NS-WBRDVD2-CA for Wireless Blu-ray Disc Player
and NS-BRDVD4/NS-BRDVD4-CA for Wired Blu-Ray Disc Player
Connecting a TV
Using HDMI (best)
Digital connection (optical or coaxial)
NOTE: To select the digital audio output mode, see page 15 of the User Guide.
Using composite (good)
NOTE: Composite connections do not provide HD quality video.
To connect to a home theater, see your User Guide.
Using Quick Setup
• Press or to select Quick Setup, then press
ENTER. The Quick Setup menu opens.
Follow the guide to set the most important
settings for your player.
Connecting to your home network
This player can be connected to your wired network using the Ethernet port on the
back of your player or using a wireless network. Using a wired network provides the
best performance, because the attached devices connect directly to the network and
are not subject to radio frequency interference.
Connecting to the Internet with a wireless network (NS-WBRDVD2 and
NS-WBRDVD2-CA only):
1Set up your access point or wireless router (if not already set up).
2Turn on your player and your TV.
3Press or to select Settings, then press ENTER. The Settings menu opens.
4Press or to select Network, then press ENTER.
Note: The screen shot is only for wireless players.
5Press or to select Network List, then press ENTER. The Network List screen
opens, showing a list of available wireless networks.
6Press or to select the wireless network you want your player to connect to.
A Network Setup screen opens with the following options: Password, Connect,
Delete, or Cancel.
7If your network does not use encryption, press or to select Connect, then
press ENTER. If the wireless network is working you should see a checkmark and a
connected message on the TV. If the message does not appear, repeat the steps
above.
OR
If your network uses encryption:
aPress or to select the Password eld, then press ENTER.
An on-screen keyboard opens.
bPress , , , or to select the rst letter in the password, then press
ENTER. Repeat this step to enter the rest of the password. If you make a
mistake, use backspace key to delete the character.
cAfter you enter the password, select the red “DONE” in the upper left-hand
corner of the keyboard, then press ENTER to close the keyboard.
dPress or to select Connect, then press ENTER. A connection message
will appear. Select Close, then press ENTER. If the connection is not
successful, repeat the steps above.
For information on connecting to a wireless network using Wi-Fi Protected Setup
(WPS), see your User Guide.
Congratulations on your purchase of a
high-quality Insignia product. Your
NS-WBRDVD2, NS-WBRDVD2-CA,
NS-BRDVD4, and NS-BRDVD4-CA represents
the state of the art in Blu-ray disc player
design and is designed for reliable and
trouble-free performance.
Package contents
• Blu-ray disc player • AAA batteries (2)
• Remote control • User Guide
• Quick Setup Guide
Installing remote control batteries
1Remove the battery compartment cover.
2Insert two AAA batteries into the battery
compartment. Make sure that the + and –
symbols on the batteries match the + and –
symbols in the battery compartment.
3Replace the battery compartment cover.
Player
Wireless router
TV
Back of player
Yellow=Video
White=Left audio
Red=Right audio
TV
Back of player
Music
For the most updated User Guide, please visit
www.insigniaproducts.com
Distributed by Best Buy Purchasing, LLC
7601 Penn Avenue South, Richeld, Minnesota, U.S.A. 55423-3645
© 2011 BBY Solutions, Inc. All rights reserved.
INSIGNIA is a trademark of BBY Solutions, Inc. Registered in some
countries. All other products and brand names are trademarks of
their respective owners.
Back of player
Optical cable
TV
Settings
Language
Parental
System
Network
Display
Audio
BD-Live
Network List
WiFi Protected Setup(WPS)
Manual
IP Settings
Wireless

ENGLISH 10-0866
Connecting to the Internet with a wired network:
1Connect a network cable to the ETHERNET jack on the back of your
player and into a wired router using an Ethernet cable (Cat 5 or better,
with RJ45 connectors).
2Press or to select Settings, then press ENTER. The Settings menu
opens.
Note: The screen shot is only for wired players.
3Press or to select Network, then press ENTER. The IP Settings
screen opens.
4Press or to select IP Mode, then press ENTER.
5Press or to select an IP Mode, then press ENTER. You can select
Dynamic - Uses DHCP to automatically obtain an IP address
Manual - Lets you manually congure network settings. (See your User
Guide to set up your connection manually.)
6Press , , , or to select Apply, then press ENTER. A Network
Test automatically runs.
7If the connection is established, select OK, then press ENTER to close
the screen.
Advanced users only: To make changes to your network connection,
see your User Guide.
Testing your network connection
1Press or to select Settings, then press ENTER. The Settings menu
opens.
2Press or to select Network, then press ENTER.
3Press or to select Network Test, then press ENTER. A dialog box
opens, showing the progress of the network test. The test results
appear shortly.
The Network Test will begin and run three tests:
1Local Network Test. If this test fails, you need to check your
connection to your home network.
•If you have a wired connection:
* Make sure your network cable is securely attached to your
router and your player.
* Make sure your router is connected to your cable or DSL
modem correctly.
•If you have a wireless connection:
* Make sure your router is connected to your cable or DSL
modem correctly.
* Make sure your player is within the range of your router.
* Make sure the desired WIFI network is selected.
* If you have a security password, be sure you have entered
the password correctly.
* If further help is need for setting up security and obtaining
your security password, contact your router manufacturer
and/or cable or DSL modem manufacturer.
2DNS Sever Test. If this test fails, there may be an issue with your
Internet service provider.
• Make sure your router is connected to your cable or DSL
modem correctly.
• Contact your Internet service provider for more help.
3Internet Connection Test. If this test fails, there may be an issue
with your Internet service provider.
• Make sure your router is connected to your cable or DSL
modem correctly.
• Contact your Internet service provider for more help.
Using connected applications (U.S. market)
Note: Instructions and support numbers for the connected applications apply to
the US market only.
You can watch movies over the Internet (for example, from Netix or
CinemaNow), or to listen to Pandora Internet radio. Before being able to
use these Internet services, you must rst:
1Have connected the player to the Internet, and passed the Network
Test, above.
2Have a valid account to these services.
Watching movies with Netix
1Press or to select Netix, then press ENTER to register your player
with your Netix account. Follow the directions on the screen. You will be
provided with an activation code.
2If you already have an existing Netix account, log in to your account
on your PC. Click on the Your Account & Help link in the upper right
corner of the screen.
3In the WATCHING INSTANTLY ON YOUR TV OR COMPUTER section, click
Activate a Netix Ready Device and enter the activation code from Step 1.
- OR -
If you do not have an existing Netix account, go to
http://www.netix.com/insignia to start your free trial and enter the
activation code from Step 1 into the Insignia code eld on screen.
4After setting up your account and activating your Blu-ray player, browse
to Instant under the Your Queue tab and add movies to queue.
5To exit Netix, press Home/Setup.
Watching movies with CinemaNow
1First set up your CinemaNow account through your PC. Go to
www.cinemanow.com/activate to get an activation PIN.
2Click Activate a New Device and sign in with your user
name/password.
3Enter any name in the Name Your Device section, then click Continue.
You now have been provided with a valid activation number to enter into
the activation eld within the CinemaNow application on your Blu-ray
player.
4Once you have successfully established an Internet connection on your
Blu-ray player, select the CinemaNow application using your remote
control, then press ENTER.
5Select the Settings tab at the bottom of the screen, then press ENTER.
6Select Activate and enter your activation code. You can now rent movies
using CinemaNow.
7To exit CinemaNow, press Home/Setup.
Listening to music with Pandora
To use an existing Pandora account:
1Press or to select Pandora, then press ENTER.
2Select I have a Pandora account from the options, then sign in with your
account information.
To create a new Pandora account on your player:
1Press or to select Pandora, then press ENTER.
2Select I am new to Pandora from the options. You will receive an
activation code.
3On your PC, go to www.pandora.com/insignia and enter the activation
code from Step 2, then click Activate.
4Click Create a Pandora Account and follow the on-screen instructions.
5To exit Pandora, press Home/Setup.
To create a new Pandora account using a PC:
• Go to http://www.pandora.com/ to create a new account.
Contact the partner company (not Insignia) if you experience an issue
using one of these applications.
Note: Support numbers for the connected applications apply to the US market only.
Netix:
www.netix.com/help
1-866-579-7113
CinemaNow:
www.cinemanow.com/support
Pandora:
http://blog.pandora.com/faq/
Using connected applications (Canada market)
To stay up-to-date on future service options, visit www.insigniaproducts.com.
Netix:
http://ca.netix.com/contactus
1-866-716-0414
One-year limited warranty
Visit www.insigniaproducts.com for details.
Contact Insignia:
For customer service, call 1-877-467-4289 (US and Canada markets)
www.insigniaproducts.com
Network cable
Wired router
Back of player
Network
Interface
Link Status
MAC Address
IP Mode
IP Address
Subnet Mask
Gateway
Primary DNS
Secondary DNS
Wired
Link Up
00:22:84:FB:C6:05
Dynamic
192.168.42.119
255.255.255.0
192.168.42.1
202.96.128.166
10.4.4.11
Settings
Language
Parental
System
Network
Display
Audio
BD-Live