Insignia NS-WBRDVD - Blu-Ray Disc Player User manual

BAA86G87?H,4L<F6*?4L8E
!&*%)
(@3?B723

ii www.insigniaproducts.com
Contents
Important safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Package contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Front . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Back . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Setting up your player . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Installing remote control batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Connecting a TV using an HDMI cable (best) . . . . . . . . . . . . . . . . . . . . . . 4
Connecting a TV using a component video cable (better) . . . . . . . . . 5
Connecting a TV using an A/V cable (good) . . . . . . . . . . . . . . . . . . . . . . . 6
Connecting a USB flash drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Connecting your home network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Using your player . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Playable discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
About Blu-ray Discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Playing a Blu-ray Disc or DVD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Controlling Blu-ray Disc or DVD playback . . . . . . . . . . . . . . . . . . . . . . . . . 8
Playing files on a data disc or USB memory stick . . . . . . . . . . . . . . . . . . 8
Playing an audio CD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Controlling audio CD playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Displaying Blu-ray Disc information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Searching for a title, chapter, or elapsed time . . . . . . . . . . . . . . . . . . . . 10
Repeating a title, chapter, or CD track . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Creating a playback loop on a DVD or audio CD . . . . . . . . . . . . . . . . . . 10
Viewing photographs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Using PIP (picture-in-picture) mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Using a disc popup menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Selecting the audio mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Selecting a viewing angle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Selecting the on-screen menu language . . . . . . . . . . . . . . . . . . . . . . . . . 11
Selecting the disc menu language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Selecting the audio language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Selecting the subtitle language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Determining whether an HDMI TV is connected . . . . . . . . . . . . . . . . . . 12
Automatically determining the best HDMI resolution . . . . . . . . . . . . 12
Selecting the TV type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Selecting the video output resolution . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Selecting the TV aspect ratio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Turning film mode on or off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Selecting the PCM downsampling rate . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Selecting the digital audio output mode . . . . . . . . . . . . . . . . . . . . . . . . . 14
Turning dynamic range control on or off . . . . . . . . . . . . . . . . . . . . . . . . . 15
Setting the parental control password . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Turning parental controls on or off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Selecting the parental control country . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Setting the parental control level . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

iii
Contents
www.insigniaproducts.com
Setting automatic disc playback mode . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Setting the BD-Live Internet access level . . . . . . . . . . . . . . . . . . . . . . . . . 16
Viewing available BD-Live storage space . . . . . . . . . . . . . . . . . . . . . . . . . 17
Erasing BD-Live storage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Setting the screen saver activation time . . . . . . . . . . . . . . . . . . . . . . . . . 17
Turning HDMI CEC support on or off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Resetting settings to the factory defaults . . . . . . . . . . . . . . . . . . . . . . . . 18
Downloading player update software . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Determining whether the network connection is active . . . . . . . . . . 18
Configuring a wired Internet connection . . . . . . . . . . . . . . . . . . . . . . . . 18
Configuring a wireless Internet connection . . . . . . . . . . . . . . . . . . . . . . 19
Using a wireless network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Deleting a WPS password . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Manually changing wireless parameters . . . . . . . . . . . . . . . . . . . . . . . . . 20
Maintaining . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
General guidelines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Electrical disturbance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Condensation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Storing discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Handling discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Cleaning discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
FAQ (frequently asked questions) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Resetting your player . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
TV screen and video . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
HDMI connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
BD-Live and USB connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Other playback problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
System and outputs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Video file requirement (USB/DISC) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
MP3/WMA audio file requirement (USB/DISC) . . . . . . . . . . . . . . . . . . . . 25
Photo file requirement (USB/DISC) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Legal notices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
One-year limited warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

1
www.insigniaproducts.com
Important safety
instructions
1Read these instructions.
2Keep these instructions.
3Heed all warnings.
4Follow all instructions.
5Do not use this apparatus near water.
6Clean only with a dry cloth.
7Do not block any ventilation openings. Install in
accordance with the manufacturer's
instructions.
8Do not install near any heat sources such as
radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce
heat.
9Do not defeat the safety purpose of the
polarized or grounding-type plug. A polarized
plug has two blades with one wider than the
other. A grounding type plug has two blades
and a third grounding prong. The wide blade or
the third prong are provided for your safety. If
the provided plug does not fit into your outlet,
consult an electrician for replacement of the
obsolete outlet.
10 Protect the power cord from being walked on or
pinched particularly at plugs, convenience
receptacles, and the point where they exit from
the apparatus.
11 Only use attachments/accessories specified by
the manufacturer.
12 Use only with the cart, stand,
tripod, bracket, or table specified
by the manufacturer, or sold with
the apparatus. When a cart is used,
use caution when moving the
cart/apparatus combination to
avoid injury from tip-over.
13 Unplug this apparatus during lightning storms
or when unused for long periods of time.
14 Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has
been damaged in any way, such as
power-supply cord or plug is damaged, liquid
has been spilled or objects have fallen into the
apparatus, the apparatus has been exposed to
rain or moisture, does not operate normally, or
has been dropped.
15 To reduce the risk of fire or electric shock, do not
expose this device to rain, moisture, dripping, or
splashing, and no objects filled with liquids,
such as vases, shall be placed on it.
16 An apparatus with a three-prong,
grounding-type plug is a Class I apparatus,
which needs to be grounded to prevent
possible electric shock. Make sure that you
connect this Class I device to a grounding-type,
three-prong outlet.
17 The wall plug is the disconnecting device. The
plug must remain readily operable.
18 Batteries should not be exposed to excessive
heat such as sunshine, fire, or the like.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
The lightning flash with arrowhead symbol within an equilateral
triangle is intended to alert you to the presence of uninsulated
dangerous voltage within your player’s enclosure that may be of
sufficient magnitude to constitute a risk of electric shock to
persons.
The exclamation point within an equilateral triangle is intended
to alert you to the presence of important operating and
maintenance (servicing) instructions in the literature that came
with your player.
This symbol is the symbol for CLASS II (Double Insulation).
Warning
Your player employs a laser system.
Use of controls, adjustments, or the
performance of procedures other
than those specified may result in
hazardous radiation exposure.
Visible laser radiation is present when open and
interlocks defeated. Do not stare into the beam.
Disposal of your old appliance
1. When this crossed-out wheeled bin symbol is attached to a
product, it means the product is covered by the European
Directive 2002/96/EC.
2. All electrical and electronic products should be disposed of
separately from the municipal waste stream via designated
collection facilities appointed by the government or the local
authorities.
3. The correct disposal of your old appliance will help prevent
potential negative consequences for the environment and
human health.
4. For more detailed information about disposal of your old
appliance, please contact your city office, waste disposal service
or the shop where you purchased the product.
Caution
Danger of explosion if battery is incorrectly replaced. Replace
only with the same or equivalent type.

2
NS-WBRDVD Connected Blu-Ray Disc Player
www.insigniaproducts.com
Connected Blu-Ray Disc Player
Introduction
Congratulations on your purchase of a high-quality
Insignia product. Your NS-WBRDVD represents the
state of the art in Blu-ray Disc player design and is
designed for reliable and trouble-free performance.
Features
• Full high-definition video playback at up to 1080p
resolution for an amazing viewing experience.
• Upconversion of standard definition DVDs for
enhanced picture quality at up to 1080p over an
HDMI connection.
•Deepcolor
• Rich multi-channel surround sound.
• Easy and simple HDTV connection using a single
HDMI cable (cable not included).
• Multiple outputs for connecting your home
theater system or amplifier.
• PIP functionality that lets you display primary and
secondary video at the same time (if available on
the Blu-ray Disc).
• Pop-up menu display without interrupting
playback (if available on the Blu-ray Disc).
• HDMI 1080p/fps output (Blu-ray Disc only) that
provides smooth playback of video with a frame
rate of 60 frames per second (TV must be
connected with an HDMI cable and be compatible
with an HDMI cable and be compatible with
1080p 60 frame).
Package contents
• Blu-ray Disc player
•A/Vcable
• Remote control
• AAA batteries (2)
•UserGuide
Front
Back
#Item Description
Disc tray Insert a disc with the label side up into this tray. To
open or close the tray, press (open/close).
VFD screen Displays status information.
Remote control sensor Receives signals from the remote control. Do not block.
(open/close) Press to open or close the disc tray.
NS-WBRDVD
13
4
56
2
78
9
1
2
3
4
(previous) Press to go to the previous title, chapter, or track.
(stop)
Press to stop playback. The Setup menu is displayed.
To resume playback, press or to select
DVD/BD-ROM, then press ENTER. Depending on the
disc, playback starts where it stopped or at the
beginning of the disc.
If you press (stop) twice, playback stops
completely. To start playback again, press
(play/pause).
(next) Press to go to the next title, chapter, or track.
(play/pause) Press to start or pause playback.
(standby/on)
Press to turn on your player or put your player in
standby mode. When your player is in standby mode,
power is still entering your player. To disconnect
power, unplug the power cord.
#Item Description
Power connector Plug the power cord into a power outlet.
WiFi antenna Sends and receives signals from a wireless access point
or router.
VIDEO OUT Connect a TV to this jack and to the AUDIO OUT L/R
jacks using a composite video cable (provided).
COMPONENT VIDEO OUT Connect a TV to these jacks and to the AUDIO OUT L/R
jacks using a component video cable and audio cable.
AUDIO OUT L/R Connect the audio for a composite TV or component
video TV to these jacks.
HDMI
Connect a TV to this jack using an HDMI cable. An
HDMI cable carries both video and audio. You do not
need to make an audio connection.
ETHERNET
Connect an ethernet cable to this jack and to a
broadband Internet jack to download BD-Live
information.
OPTICAL DIGITAL OUT
Connect an optical digital amplifier to this jack to play
the sound from the TV through the amplifier’s
speakers.
COAXIAL DIGITAL OUT
Connect an coaxial digital amplifier to this jack to play
the sound from the TV through the amplifier’s
speakers.
USB port Connect a USB flash drive to this port.
#Item Description
5
6
7
8
9
HDMI ETHER NET
COAXIAL
OPTI CAL
DIGITA L OUT
USB
DVD-Vi deo
Blu-ray
3181372
C
U
S
CONFORMSTO
ULS T D. 60065
CER TIFIE D TO
CSASTD.C22.2
No.60065
R
T
E
E
T
K
N
I
CM
VIDEO L R
YCB / P B CR/ P R
COMPONENT VI DEO OUT
VIDEOOUT AUDIOOUT
S/N:
MODEL: NS-WBRDVD AC: 110V- 120V~ 50/60H z
BLU-RAYDISCPLAYER
POWER:25W
MADEI N CHINA
ManufacturedforI nsigniaP roducts
7601P enn A ve S . R ichf iel d, M N 55423 US A
CLASS 1 LAS ER PR ODUCT
Thisdevice c omplieswithpart 15 of
theFCCr ules. Operationis s ubject
tothefollowingtwo conditions:
(1)This device maynot cause harmful
interference, and
(2)This device musta ccept any inter-
ference received, includinginter-
ference that mayca use undesired
operation.
Thisdevice c omplieswith21 CFR c hapter1,
subchapterJ. Applicablea tthe dateof
manuf a c t ur e .
U.S. P atent N os. 6,836, 549; 6,381,747;
7,050,698; 6,516, 132; a nd 5,583, 936.
RIS QU E C HO C E L E C T R IQ UE NE
PAS OU VR IR
RIS K OF EL E C T R IC SH OC K
DO NOT OPEN
Manufacturedunderlicense under
U.S. P atent #'s: 5, 451,942; 5,956, 674;
5,974,380; 5,9 78,762; 6,226,616; 6, 487,
535; 7,392,195; 7,272, 567; 7,333,929;
7,212,872 & other U .S . a nd w or ldwi de
patents i ss ued & pe nding. DT S i s a
registeredtrademark& theDTS logos
andSymbolaretrademarksofDTS,
Inc. 1996-2008 DTS , I nc . A ll R ights
Reserved.
FCC ID:
Manufacturedunderlicense fromDolby La-
boratories.Dolbyandthe double-Dsymbol
aretrademarksofDolbyLaboratories.
Manufactured:
13
4
67
2
10
5
9
8
1
2
3
4
5
6
7
8
9
10

3
Connected Blu-Ray Disc Player
www.insigniaproducts.com
Remote control
#Item Description
STANDBY/ON
Press to turn on your player or put your player in
standby mode. When your player is in standby mode,
power is still entering your player. To disconnect
power, unplug the power cord.
Number buttons
In playback mode, press SEARCH, then press the
number buttons to enter a title, chapter, track, or time.
In menu mode, press to enter the parental code
password.
SEARCH
Press to search for a title, chapter, or specific time on a
disc. For more information, see “Searching for a title,
chapter, or elapsed time” on page 10.
(fast reverse)
Press to fast reverse. Each time you press this button,
the fast-reverse speed decreases from Fast x 2,
Fast x 4, Fast x 8, Fast x 16, Fast x 32, Fast x 64,
Fast x 128. Press (play/pause) to resume normal
playback.
(fast forward)
Press to fast forward. Each time you press this button,
the fast-forward speed increases from Fast x 2,
Fast x 4, Fast x 8, Fast x 16, Fast x 32, Fast x 64,
Fast x 128. Press (play/pause) to resume normal
playback.
ZOOM
Press to zoom in on a JPEG picture or video. Each time
you press this button, the magnification level changes.
This button is only used for JPEG discs and DVD discs.
1
2
3
4
5
6
(stop)
Press to stop playback. The Setup menu is displayed.
To resume playback, press or to select
DVD/BD-ROM, then press ENTER. Depending on the
disc, playback starts where it stopped or at the
beginning of the disc.
If you press (stop) twice, playback stops
completely. To start playback again, press
(play/pause).
REPEAT
Press to repeat the current title, chapter, track, or
repeat all. For more information, see “Repeating a
title, chapter, or CD track” on page 10.
RESOLUTION
Press to select the video resolution. For more
information, see “Selecting the video output
resolution” on page 13.
A-B
Press to create a playback loop. For more information,
see “Creating a playback loop on a DVD or audio CD”
on page 10.
DISC MENU
During DVD playback, press to open the DVD root
menu where you can select DVD playback options.
(This button is valid for DVDs that have a multi-layer
menu.)
If a disc menu opens when playing a Blu-ray Disc or
DVD, press to select a menu option, then press ENTER.
During MP3, WMA, or JPEG playback, press to select a
file on the popup menu, then press ENTER.
When a menu is open, press to select an option, then
press ENTER.
ENTER Press to confirm selection in a menu.
SETUP Press to open the setup menu where you can adjust
options.
SUBTITLE
Press to select a subtitle language or to turn subtitles
off. For more information, see “Selecting the subtitle
language” on page 12.
A (red), B (green),
C (yellow), D (blue)
When playing a Blu-ray Disc that has a Java™
application, press to control playback. For more
information, see the documentation that came with
the Blu-ray Disc.
PIP
Press to turn PIP (picture-in-picture) mode on or off.
For more information, see “Using PIP
(picture-in-picture) mode” on page 11.
OPEN/CLOSE Press to open or close the disc tray.
CLEAR Press to clear an input error.
(next) Press to go to the next title, chapter, or track.
(previous) Press to go to the previous title, chapter, or track.
(step)
Press to advance one frame at a time. Press
(play/pause) to resume normal playback.
(play/pause) Press to start or pause playback.
ANGLE
Press to select a viewing angle if multiple angles are
available on the disc. For more information, see
“Selecting a viewing angle” on page 11.
DISPLAY
Press to display disc information, such as “Title
Elapsed,” “Title Remain,” “Chapter Elapsed,” “Chapter
Remain,” and “Display Off.”
Each time you press this button the display changes.
POPUP MENU/
TITLE MENU
During Blu-ray Disc playback, press to open a menu
that lets you control Blu-ray Disc playback.
During DVD playback, press to open the DVD menu (if
available). For more information, see “Using a disc
popup menu” on page 11.
RETURN
During MP3, WMA, or JPEG playback, press to return to
the previous menu.
In the Setup menu, press to close the menu.
#Item Description
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27

4
NS-WBRDVD Connected Blu-Ray Disc Player
www.insigniaproducts.com
Setting up your player
Installing remote control batteries
To install remote control batteries:
1Remove the battery compartment cover.
2Insert two AAA batteries into the battery
compartment. Make sure that the + and –
symbols on the batteries match the + and –
symbols in the battery compartment.
3Replace the battery compartment cover.
Connecting a TV using an HDMI cable (best)
To connect a TV using an HDMI cable:
• Connect an HDMI cable to the HDMI jack on
the back of your player and to the HDMI IN
jack on the TV.
AUDIO Press to select the audio mode. For more information,
see “Selecting the audio mode” on page 11.
SECONDARY AUDIO
In PIP mode, press to turn the audio for the secondary
video on or off. For more information, see “Using PIP
(picture-in-picture) mode” on page 11.
Notes
• Make sure that you insert the batteries correctly.
• Do not heat, open, or short-circuit batteries.
• Do not throw batteries into a fire.
• Do not mix different types of batteries or mix
old and new batteries.
• Do not try to recharge non-rechargable
batteries.
• If the remote control does not function correctly
or if the operating range becomes reduced,
replace the batteries.
#Item Description
28
29
Notes
• Only the HDMI is capable of 1080i/1080p video
output and the highest definition audio codes.
• An HDMI cable carries both video and audio. If
you want to use TV speakers, you do not need to
make an audio connection. If you want to use an
audio receiver, connect an HDMI cable between
your player and the HDMI input jack on the
receiver. Then connect a second HDMI cable
between the HDMI output jack on the receiver
and the HDMI input jack on the TV.
TV
Back of player

5
Connected Blu-Ray Disc Player
www.insigniaproducts.com
Connecting a TV using a component video
cable (better)
Using an digital audio receiver
To connect a component-capable TV to a digital
audio receiver:
1Connect a component video cable to the
COMPONENT VIDEO OUT jacks on the back of
your player and to the COMPONENT VIDEO IN
jacks on the TV.
2Connect a digital optical cable to the OPTICAL
DIGITAL OUT jack on the back of your TV and to
the OPTICAL DIGITAL IN jack on the receiver.
Or
Connect a digital coaxial cable to the COAXIAL
DIGITAL OUT jack on the back of your TV and to
the COAXIAL DIGITAL IN jack on the receiver.
3Connect a second optical or digital cable to the
DIGITAL OUT jack on the receiver and to the
DIGITAL IN jack on the TV.
Using an analog audio receiver
To connect a component-capable TV to an
analog audio receiver:
1Connect a component video cable to the
COMPONENT VIDEO OUT jacks on the back of
your player and to the COMPONENT VIDEO IN
jacks on the TV.
2Connect an audio cable to the AUDIO OUT L/R
jacks on the back of your player and to the
AUDIO IN L/R jacks on the receiver.
3Connect a second audio cable to the AUDIO
OUT L/R jacks on the recevier and to the AUDIO
IN L/R jacks on the TV.
Notes
The following task shows connecting the audio to a
receiver. If you want to use the TV speakers instead of
a receiver, connect the audio cable to the TV’s audio
in jacks on the TV.
Connect the OPTICAL DIGITAL OUT jack
OR
COAXIAL DIGITAL OUT jack
Component video cable
Back of player
TV
Digital audio receiver
Analog audio receiver
Audio cable
Back of player
Component video cable
TV

6
NS-WBRDVD Connected Blu-Ray Disc Player
www.insigniaproducts.com
Connecting a TV using an A/V cable (good)
To connect a TV using an AV cable:
• Connect an A/V cable to the VIDEO OUT and
AUDIO OUT L/R jacks on the back of your
player and to the VIDEO IN and AUDIO IN L/R
jack on the TV. Jacks and cable connectors are
usually color-codes. Make sure that you match
the colors.
Connecting a USB flash drive
To connect a USB flash drive:
• Plug the USB flash drive into the USB port on the
back of your player.
Connecting your home network
Your player can be connected to your home
network:
• By connecting an Ethernet cable to the
ETHERNET jack on the back of your player and to
a wired router. Using a wired network provides
the best performance, because the attached
devices connect directly to the network and are
not subject to radio frequency interference.
• By connecting through the built-in wireless
device and a wireless access point or router.
To connect your player to a wired router:
1Connect an Ethernet cable (CAT5 or better with
RJ45 connector) to the ETHERNET jack on the
back of your player and to an Ethernet jack on a
router.
2Connect an Ethernet cable (CAT5 or better with
RJ45 connector) to the router and the computer.
Yellow=Video
White=Left audio
Red=Right audio
TV
Back of player
Note
When plugging or unplugging the cable, hold the
connector on the end of the cable. When
unplugging, do not pull on the cable. Press down the
lock tab and pull the connector out of the jack.
Note
• Do not connect a modular phone cable to the
ETHERNET jack.
• Because there are various connection
configurations, follow the instructions from
your telecommunication carrier or Internet
service provider.
VIDEO L R
YCB / P B CR / P R HDMI ETHERNET
COAXIAL
OPT I CAL
DIGI TAL OUT
COM PON ENT V ID EO OUT
VIDEO OUT AUDIO OUT
Back of player
Wired router
Incoming
broadband
Internet
connection
Ethernet cable
Ethernet cable
Computer

7
Connected Blu-Ray Disc Player
www.insigniaproducts.com
To connect your player to a wireless access point
or router:
• Configure your player to access the wireless
access point or router.
The network configuration and connection
method may vary depending on the equipment
in use and the network environment. Your player
is equipped with an IEEE 802.11n wireless module,
which also supports the 802.11b/g standards. For
the best wireless performance, we recommend
using a IEEE 802.11n certified Wi-Fi network
(access point or wireless router).
Using your player
Playable discs
About Blu-ray Discs
The massive storage capacity of a Blu-ray Disc
allows a higher standard of picture and audio
quality and a wealth of special effects and
enhanced features not available on DVDs.
Java
Your player features Java support so you can get the
most out of the latest Blu-ray Discs. When a Blu-ray
Disc loads, explore the title menu to enjoy these
extra features.
HDMI
HDMI is the only domestic medium capable of
transmitting the huge volumes of data required by
the high picture resolutions and advanced digital
audio codecs that make Blu-ray such an exciting
medium.
Playing Blu-ray Discs
Playing Blu-ray Discs are a lot like playing DVDs,
except Blu-ray Discs have a higher level of
interactivity.
Most of the standard features of DVD playback work
the same with Blu-ray Disc playback. The two most
common exceptions are:
•Resume play—Not available on Blu-ray Java discs
•A-B repeat (playback loop)—Not available on
some Blu-ray Discs
Color buttons
The red, green, yellow and blue buttons on the
remote control are used with interactive menus
when operating a Blu-ray Disc that includes Java™
applications. For more information about using this
kind of disc, see the instructions that came with the
disc.
Note
Unless otherwise noted, all tasks in this section are
based on using the remote control.
Disc type Logo Disc type Logo
Blu-ray Disc Audio CDs (CDDA)
DVD-video
(DVD-ROM)
DTS-CD
DVD-RAM MP3/WMA/
JPEG/Data CD
DVD-RW MPEG4
DVD-R DivX
NS-WBRDVD
Player
Wireless access point or router
Computer
Notes
• Writeable DVD discs (DVD-RAM, DVD-RW,
DVD-R) must be finalized, VR-mode only.
• Your player supports discs that are compatible
with DVD-RAM Standard Version 2.0.
• Playback may not work for some types of discs,
or when specific operations, such as angle
change and aspect ratio adjustment, are being
performed. Information about the discs is
written in detail on the box.
• Do not allow the disc to become dirty or
scratched. Fingerprints, dirt, dust, scratches or
deposits of cigarette smoke on the recording
surface may make it impossible to use the disc
for playback.
• CD-R/-RW, DVD-RAM/-RW/-R recorded with UDF
or ISO9660 format can be played back.
• Windows Media Audio (WMA) files must be
written to the disc with a .wma file extension in
order to be recognized and played back
correctly.
• High bitrate or variable bitrate .wma files may
not play back correctly.
• JPEG picture files must be written to the disc
with a .jpeg or .jpg file extension in order to be
recognized and played back correctly.

8
NS-WBRDVD Connected Blu-Ray Disc Player
www.insigniaproducts.com
Playing a Blu-ray Disc or DVD
To play a Blu-ray Disc or DVD:
1Press STANDBY/ON.
2Turn on the TV, then select the input setting on
the TV that matches the connection method
you used to connect your player.
3Press OPEN/CLOSE to open the disc tray.
4Place a disc on the disc tray with the label facing
up, then press OPEN/CLOSE to close the disc
tray. It may take a few seconds for the disc to
load.
5If a Blu-ray Disc or DVD menu opens, press
or to select PLAY, then press ENTER.
6To eject the disc, press OPEN/CLOSE.
Controlling Blu-ray Disc or DVD playback
To control Blu-ray Disc or DVD playback:
• To start or pause playback, press (play/pause).
The sound is muted when your player is in pause
mode. To resume normal playback, press
(play/pause).
• To stop playback, press (stop). The Setup menu
is displayed. To resume playback, press
or to select DVD/BD-ROM, then press ENTER.
Depending on the disc, playback starts where it
stopped or at the beginning of the disc. If you
press (stop) twice, playback stops completely.
To start playback again, press (play/pause).
Playback starts at the beginning of the disc.
• To fast-forward, press . Each time you press this
button, the fast-forward speed changes in the
following sequence: Fast x 2, Fast x 4, Fast x 8,
Fast x 16, Fast x 32, Fast x 64, Fast x 128. Press
(play/pause) to resume normal playback.
• To fast-reverse, press . Each time you press this
button, the fast-reverse speed changes in the
following sequence: Fast x 2, Fast x 4, Fast x 8,
Fast x 16, Fast x 32, Fast x 64, Fast x 128. Press
(play/pause) to resume normal playback.
• To go to the previous chapter, press within five
seconds after the current chapter starts. To go to
the beginning of the chapter, press any time
after playing the first five seconds of the chapter.
• To go to the next chapter, press .
• To play one frame at a time, press (step). Each
time you press this button, the video advances
one frame. Press (play/pause) to resume
normal playback.
Playing files on a data disc or USB memory
stick
When you insert a data disc or USB memory stick
containing picture, music, or video files into your
player, a menu opens and icons are added to the
menu to indicate that video, music, or picture files
are available for playback.
To play audio or video files:
1Press or to select Music or Videos, then
press ENTER. A menu opens.
2Press or to select Play Files, then press
ENTER. The Please select Play mode box opens.
3Press or to select Play All (plays all files) or
Play Selection (plays files added to the playlist),
then press ENTER. The file(s) play and the
following menu opens.
• If you are playing music files and want to view
JPG picture files at the same time, press or
to select Browse Pictures, then press
ENTER. Select the JPG files you want to view.
Note
If appears on the screen, the current action is not
permitted by the disc or your player. For example,
many discs do not let you fast-forward through the
warning information at the beginning of the disc.
Vid eos
Music
Pictures
Settings

9
Connected Blu-Ray Disc Player
www.insigniaproducts.com
• If you want to to see information about the file
that is playing, press or to select Now
Playing, then press ENTER. The following
display appears
To create a playlist:
1Insert a disc or plug in a USB flash drive, then
press .
2Press or to select Optical Disc or USB, then
press ENTER. A file browser window opens with
a list of files and folders.
3Press or to select a file or folder, then press
ENTER. If you selected a folder, the files in the
folder are displayed. Press or to select a file,
then press ENTER. The following menu opens:
4Press or to select Add to playlist, then
press ENTER. The file is add to the playlist.
When you add a file to the playlist, Remove all
from playlist, Previous Folder, Play Files,
Browse Pictures, and Now Playing appear on
the screen automatically. You can use these
options to control playback.
Playing an audio CD
To play an audio CD:
1Press STANDBY/ON.
2Press OPEN/CLOSE to open the disc tray.
3Place a CD on the disc tray with the label facing
up, then press OPEN/CLOSE to close the disc
tray. It may take a few seconds for the CD to
load.
4Press ENTER to start playback.
5To eject the CD, press OPEN/CLOSE .
Controlling audio CD playback
To control audio CD playback:
• To start or pause playback, press (play/pause).
The sound is muted when your player is in pause
mode. To resume normal playback, press
(play/pause).
• To stop playback, press (stop). To resume
normal playback where the CD stopped, press
(play/pause). To stop playback completely, press
(stop) twice. To start playback again, press
(play/pause). Playback starts at the beginning
of the CD.
• To fast-forward, press . To resume normal
playback, press ENTER.
• To fast reverse, press . To resume normal
playback, press ENTER.
• To go to the previous track, press . To go to the
next track, press .
• To select a track, press SEARCH, enter the track
number with the number buttons, then press
ENTER.
Or,
Enter the track number by pressing the
appropriate number buttons, then press ENTER.
• To display the elapsed or remaining time for the
current track, press DISPLAY repeatedly.
Displaying Blu-ray Disc information
To display Blu-ray Disc information:
• Press DISPLAY. Your player displays information
about the Disc, such as type of disc, current
elapsed time in title, total amount of time in title,
current chapter, and total number of chapters.
• Press DISPLAY or wait a few seconds to close the
display.
Random play indicator
Repeat indicator
Play indicator
Note
If the file you selected is already in the playlist,
Remove from playlist appears.
File 1/5 song1.mp3
Title: Cool Track
Artist: Ricardo Funiccio
Album: Dead Dux
0:02:00 0:30:00 O O Play
Note
The information displayed for discs other than
Blu-ray Discs will be different.

10
NS-WBRDVD Connected Blu-Ray Disc Player
www.insigniaproducts.com
Searching for a title, chapter, or elapsed time
To search for a title, chapter, or elapsed time:
1During playback, press SEARCH one or more
times to select a search mode.
• One press selects Goto Title - - - mode.
• Two presses selects Goto Chapter - - - mode.
• Three presses selects Goto Time --: -- : --
mode.
2Press the number buttons to enter the title
number, chapter number, or time, then press
ENTER. Your player goes to the title, chapter, or
time you entered.
Repeating a title, chapter, or CD track
To repeat a title, chapter, or CD track:
• To repeat a title or chapter, press REPEAT one or
more times to select a repeat mode. You can
select Off, Repeat Title, or Repeat Chapter.
• To repeat a CD track, press REPEAT once to repeat
the entire CD or press REPEAT twice to repeat the
current track. Press REPEAT a third time to cancel
repeat mode.
Creating a playback loop on a DVD or
audio CD
To create a playback loop:
1Play the disc until you reach the point where
you want the loop to start, then press A-B.
2Play the disc until you reach the point where
you want the loop to stop, then press A-B. Your
player plays the loop you created repeatedly.
3Press A-B to cancel the loop and return to
normal playback.
Viewing photographs
Your player can display digital photograph
files that have been burned onto a data disc,
DVD+/-R, DVD+/-R/W, or Blu-ray Disc.
To view photographs:
1Insert the disc with photographs into your
Blu-ray player. The following menu opens:
2Press or to select Pictures, then press
ENTER. A menu opens.
•Main Menu—Returns to the main menu.
•Play Files—Open the Please Select Play Mode
box. Press or to select an option, then
press ENTER.
•Play All—Plays all files.
•Play Current Folder—Plays the current
JPG files.
•Browse Music—Opens the music playing
menu where you can select music files to
play while you view photographs.
•Now Playing—Opens a progress bar.
To create a playlist:
1Insert a disc or plug in a USB flash drive, then
press .
2Press or to select Optical Disc or USB, then
press ENTER. A file browser window opens with
a list of files and folders.
3Press or to select a file or folder, then press
ENTER. If you selected a folder, the files in the
folder are displayed. Press or to select a file,
then press ENTER.
4Press . A menu appears.
5Press or to select an option, then press
ENTER. You can select:
•Remove all from playlist—Deletes all files in
playlist.
•Previous folder—Returns the previous menu.
•Play files—Play all files or play files in the
playlist.
•Browse Music—Opens the music playing
menu where you can select music files to play
while you view photographs.
•Now playing—Opens a progress bar.
To add a JPG file to the playlist:
1Insert a disc or plug in a USB flash drive, then
press .
2Press or to select Optical Disc or USB, then
press ENTER.
3Press or to select a file or folder, then press
ENTER. If you selected a folder, the files in the
folder are displayed. Press or to select a file,
then press ENTER. The following menu opens:
4Press ENTER.
5Press or to select Play File. The file starts
playing. Do you have to press ENTER?
6During playback, press DISC MENU to open the
SLIDE SHOW menu where you can select the
slide show mode and picture switching time.
Note
Blu-ray Discs do not normally support playback
loops.
Vid eos
Music
Pictures
Settings
Add to playlist

11
Connected Blu-Ray Disc Player
www.insigniaproducts.com
Using PIP (picture-in-picture) mode
Some Blu-ray Discs and DVDs are compatible with
picture-in-picture (PIP) mode. In PIP mode, the
primary video is displayed on the full screen, and
the secondary video is displayed in a small window.
See the documentation that came with the disc for
playback instructions.
To use PIP mode:
1Press PIP to turn PIP mode on or off.
2If PIP mode is on, press SECONDARY AUDIO to
turn the audio for the video in the PIP window
on or off.
Using a disc popup menu
To use a disc popup menu:
1During Blu-ray or DVD playback, press
POPUP MENU/TITLE MENU. The Blu-ray popup
menu or DVD disc menu opens.
2Press or to select an option, then press
ENTER.
Selecting the audio mode
To select the audio mode:
1Press AUDIO. Your player displays audio channel
information, such as “01/03 Eng Dolby Digital.”
“01” indicates the currently selected audio
channel. “03” indicates the total number of
audio channels. “Eng” (English) indicates the
audio language. “Dolby Digital” describes the
currently selected audio format.
2Press to select an audio mode.
Selecting a viewing angle
To select the viewing angle:
• During playback, press ANGLE. Your player
displays “Angle X of X.” “The first “X” indicates the
current viewing angle, and the second “X”
indicates the total number of viewing angles.
Selecting the on-screen menu language
To select the on-screen menu language:
1Press SETUP. The Settings menu opens.
2Press , press or to select Language, then
press ENTER. The Language menu opens.
3Press or to select OSD, then press ENTER.
4Press or to select the language you want,
then press ENTER. You can select English,
French, or Spanish.
5Press to go to the previous menu, or press
SETUP to return to the root menu.
Selecting the disc menu language
To select the disc menu language:
1Press SETUP. The Settings menu opens.
2Press , press or to select Language, then
press ENTER. The Language menu opens.
3Press or to select Menu, then press ENTER.
4Press or to select the language you want,
then press ENTER.
5Press to go to the previous menu, or press
SETUP to return to the root menu.
Note
Not all discs are recorded with multiple viewing
angles and not all scenes on a disc have multiple
viewing angles.
Primary video
Secondary video
Notes
• Not all languages are available on all discs.
• Most discs only have one menu language.
Settings
La ng ua ge
OSD
Men u
Aud io
Subtitle
English
English
English
English
Language
Audio
Network
Display
Parental
System
Settings
La ng ua ge
OSD
Men u
Aud io
Subtitle
English
English
English
English
Language
Audio
Network
Display
Parental
System

12
NS-WBRDVD Connected Blu-Ray Disc Player
www.insigniaproducts.com
Selecting the audio language
To select the on-screen menu language:
1Press SETUP. The Settings menu opens.
2Press , press or to select Language, then
press ENTER. The Language menu opens.
3Press or to select Audio, then press ENTER.
4Press or to select the language you want,
then press ENTER.
5Press to go to the previous menu, or press
SETUP to return to the root menu.
Selecting the subtitle language
To select the subtitle language:
1Press SUBTITLE. A display opens that shows the
current subtitle language number and number
and the total number of available languages (for
example, 01/08 ENG). “01” indicates the current
subtitle language, “08” indicates the total
number of available languages, and “ENG”
(English) indicates the current language.
2Press to select a subtitle language.
Determining whether an HDMI TV is
connected
To determine whether an HDMI TV is connected:
1Press SETUP. The Settings menu opens.
2Press , press or to select Display, then
press ENTER. The Display menu opens.
3Press or to select HDMI Status, then press
ENTER.
If an HDMI TV is connected, Connected appears.
If an HDMI TV is not connected What appears?
4Press to go to the previous menu, or press
SETUP to close the menu. Should this be
changed to “to return to the root menu”?
Automatically determining the best HDMI
resolution
To automatically determine the best HDMI
resolution:
1Press SETUP. The Settings menu opens.
2Press , press or to select Display, then
press ENTER. The Display menu opens.
3Press or to select HDMI preferred Format,
then press ENTER.Your player displays the best
HDMI format for the connected TV.
4Press to go to the previous menu, or press
SETUP to close the menu. Should this be
changed to “to return to the root menu”?
Notes
• Not all languages are available on all discs.
• Some discs do not let you select the audio
language using your player’s menu. Instead, you
have to select the audio language from the disc
setup menu (the menu that appears after you
insert the disc).
Notes
• To turn off subtitle, press SUBTITLE until Off
appears.
• Not all languages are available on all discs.
• Some discs do not let you select the subtitle
language from your player. Instead, you have to
select the subtitle language from the disc setup
menu (the menu that appears after you insert
the disc).
• You can also select the subtitle language from
the Audio menu in the on-screen menu.
Settings
La ng ua ge
OSD
Men u
Aud io
Subtitle
English
English
English
English
Language
Audio
Network
Display
Parental
System
Set ting s
Language
Audio
Ne two rk
System
Parent al
Display
Disp lay
HDMI Status
HDMI preferred Format
TV Type
Resolution
TV Aspect
F il m M od e(1 080p2 4)
Connected
1080p
PAL
HDMI Auto
16:9 Wide
On
Set ting s
Language
Audio
Ne two rk
System
Parent al
Display
Disp lay
HDMI Status
HDMI preferred Format
TV Type
Resolution
TV Aspect
F il m M od e(1 080p2 4)
Connected
1080p
PAL
HDMI Auto
16:9 Wide
On

13
Connected Blu-Ray Disc Player
www.insigniaproducts.com
Selecting the TV type
To select the TV type:
1Press SETUP. The Settings menu opens.
2Press , press or to select Display, then
press ENTER. The Display menu opens.
3Press or to select TV Type, then press
ENTER.
4Press to select NTSC (if you are playing a disc
in the NTSC format) or PAL (If you are playing a
disc in the PAL format).
5Press to go to the previous menu, or press
SETUP to return to the root menu.
Selecting the video output resolution
To select the video output resolution:
1Press SETUP. The Settings menu opens.
2Press , press or to select Display, then
press ENTER. The Display menu opens.
3Press or to select Resolution, then press
ENTER.
4Press or to select the resolution you want,
then press ENTER.
5Press to go to the previous menu, or press
SETUP to return to the root menu.
Selecting the TV aspect ratio
1Press SETUP. The Settings menu opens.
2Press , press or to select Display, then
press ENTER. The Display menu opens.
3Press or to select TV Aspect, then press
ENTER.
Set ting s
Language
Audio
Ne two rk
System
Parent al
Display
Disp lay
HDMI Status
HDMI preferred Format
TV Type
Resolution
TV Aspect
F il m M od e(1 080p2 4)
Connected
1080p
PAL
HDMI Auto
16:9 Wide
On
Set ting s
Language
Audio
Ne two rk
System
Parent al
Display
Disp lay
HDMI Status
HDMI preferred Format
TV Type
Resolution
TV Aspect
F il m M od e(1 080p2 4)
Connected
1080p
PAL
HDMI Auto
16:9 Wide
On
TV type Resolution
If your TV is a standard-definition
NTSC TV (American or Asian SD TV)
480i
If your TV is a standard-definition PAL
TV (European SD TV)
576i
If your TV is an enhanced-definition
TV (EDTV)
480p or 576p
If your TV is a high-definition TV
(HDTV) capable of 720p only
720p
If your TV is a high-definition TV
(HDTV) capable of 1080i only
1080i
If the TV is a high-definition TV
(HDTV) capable of 1080p (any frame
rate) connected to the HDMI jack on
your player
1080p
If your TV is a high-definition TV
(HDTV) connected to the HDMI jack on
your player and you want your player
to set the output resolution based on
information exchanged between the
TV and your player over the HDMI
cable
HDMI Auto
Notes
• Selecting a resolution the TV does not support
could result in an unstable picture or loss of the
picture. See the documentation that came with
the TV to find the resolutions the TV supports.
• Only the HDMI output on your player supports
1080p video output at any frame rate. If the TV
is connected to the component output, the
video output is limited to 1080i.
Set ting s
Language
Audio
Ne two rk
System
Parent al
Display
Disp lay
HDMI Status
HDMI preferred Format
TV Type
Resolution
TV Aspect
F il m M od e(1 080p2 4)
Connected
1080p
PAL
HDMI Auto
16:9 Wide
On

14
NS-WBRDVD Connected Blu-Ray Disc Player
www.insigniaproducts.com
4Press or to select the aspect ratio you want,
then press ENTER.You can select 16:9
Pillarbox, 4:3 Pan & Scan, 4:3 Letter Box, or
16:9 wide.
5Press to go to the previous menu, or press
SETUP to close the menu. Should this be
changed to “to return to the root menu”?
Turning film mode on or off
Movies are recorded on film at a rate of 24 pictures
(frames) per second. Many of the movies on Blu-ray
Discs are recorded on the discs at this frame rate.
However, not all TVs can display 24 progressive
frames/second of video. If the TV cannot display
this frame rate, you need to turn off Film Mode
(1080p24).
To turn film mode on or off:
1Press SETUP. The Settings menu opens.
2Press , press or to select Display, then
press ENTER. The Display menu opens.
3Press or to select Film Mode (1080p24),
then press ENTER.
4Press or to select On or Off. Off selects a 60
frames/second output format.
5Press to go to the previous menu, or press
SETUP to return to the root menu.
Selecting the PCM downsampling rate
To select the PCM downsampling rate:
1Press SETUP. The Settings menu opens.
2Press , press or to select Audio, then press
ENTER. The Audio menu opens.
3Press or to select PCM Downsampling,
then press ENTER.
4Press one or more times to select the PCM
downsampling rate you want. You can select
48KHz, 96KHz, or Off.
• If you have a surround sound receiver
connected to your player through the SPDIF
jack, select the highest sampling rate the
receiver supports. See the documentation that
came with the receiver.
• If you do not have a surround sound receiver
connected to your player, select 48KHz.
• If you have a surround sound receiver
connected to your player through the analog
audio Land Rjacks, select 48KHz.
• If you have a surround sound receiver
connected to your player through the HDMI
output, select 48KHz.
5Press to go to the previous menu, or press
SETUP to return to the root menu.
Selecting the digital audio output mode
To select the digital audio output mode:
1Press SETUP. The Settings menu opens.
2Press , press or to select Audio, then press
ENTER. The Audio menu opens.
3Press or to select Digital Output, then
press ENTER.
Notes
• If your TV has a rectangular (16:9) aspect ratio,
choose one of the 16:9 aspect ratios. If your TV
has a square (4:3) aspect ratio, choose one of the
4:3 aspect ratios.
• Setting your player for one of the 16:9 settings
when connected to a 4:3 TV or setting your
player for one of the 4:3 settings when
connected to a 16:9 TV will produce
unpredictable results.
• In the standard-definition (576p/480p) mode,
your player has 16:9 and 4:3 aspect ratios. In the
high-definition (720p/1080i/1080p) mode, your
player has only 16:9 aspect ratio.
Set ting s
Language
Audio
Ne two rk
System
Parent al
Display
Disp lay
HDMI Status
HDMI preferred Format
TV Type
Resolution
TV Aspect
F il m M od e(1 080p2 4)
Connected
1080p
PAL
HDMI Auto
16:9 Wide
On
Note
Incorrectly setting the digital audio output’s PCM
sampling rate may result in unpredictable audio
playback.
Settings
Au dio
PCM Downs amp ling
Digital Output
Dyn amic Range Co ntro l
48 K hz
PCM
O
Language
Audio
Network
System
Display
Parental
Settings
Au dio
PCM Downs amp ling
Digital Output
Dyn amic Range Co ntro l
48 K hz
PCM
O
Language
Audio
Network
System
Display
Parental

15
Connected Blu-Ray Disc Player
www.insigniaproducts.com
4Press or to select the digital output mode
you want. You can select:
•PCM—Sends mixed digital audio over the
HDMI connection in 7.1CH PCM (if supported
by HDMI device) and the SPDIF connection in
two-channel PCM format.
•Bitstream HD—Sends the original bitstream
from the disc over the HDMI and SPDIF
connections using highest quality possible.
HDMI has the higher quality capabilities with
advanced audio codecs like TrueHD and
DTS-HD. Blu-ray audio is limited to the
soundtrack for the main movie (no PIP audio
and no effects audio).
•Bitstream Legacy—Sends the original
bitstream from the disc over the HDMI and
SPDIF connections using legacy audio
formats. Blu-ray audio is limited to the
soundtrack for the main movie (no PIP audio
and no effects audio).
•Bitstream mixed—Sends mixed and encoded
Blu-ray audio streams in a single bitstream.
This mode is primarily intended for use with
SPDIF 5.1CH receivers to produce mixed
Blu-ray audio in surround sound.
5Press to go to the previous menu, or press
SETUP to return to the root menu.
Turning dynamic range control on or off
Dynamic range control is only active when a Dolby
Digital signal is detected.
When Dynamic Range Control is set to Off, movie
soundtracks are played with the standard dynamic
range.
When movie soundtracks are played at low volume
or from smaller speakers, you can set Dynamic
Range Control to On. Your player applies
appropriate compression to make low-level content
more intelligible and prevent dramatic passages
from getting too loud.
To turn dynamic range control on or off:
1Press SETUP. The Settings menu opens.
2Press , press or to select Audio, then press
ENTER. The Audio menu opens.
3Press or to select Dynamic Range Control,
then press ENTER.
4Press or to select On or Off.
5Press to go to the previous menu, or press
SETUP to return to the root menu.
Setting the parental control password
Before you can set parental control, you must set a
password.
To set the parental control password:
1Press SETUP. The Settings menu opens.
2Press , press or to select Parental, then
press ENTER. The Parental menu opens.
3Press or to select Parental Password, then
press ENTER.
4Enter the default password (0000). If you forget
your password, enter 0000.
5Press to go to the previous menu, or press
SETUP to return to the root menu.
Turning parental controls on or off
In the following task, when do you enter the
password?
To turn parental controls on or off:
1Press SETUP. The Settings menu opens.
2Press , press or to select Parental, then
press ENTER. The Parental menu opens.
3Press or to select Parental Control, then
press ENTER.
4Press or to select On or Off, then press
ENTER. If you select On, you can change the
other parental control options. If you select Off,
you cannot change the other parental control
options.
Settings
Au dio
PCM Downs amp ling
Digital Output
Dyn amic Range Co ntro l
48 K hz
PCM
O
Language
Audio
Network
System
Display
Parental
Settings
Parental
Parental Country
Parental Control
Parental Level
Parental Passw ord
USA
O
8[A udlt ]
Language
Audio
Display
Parental
System
Network
Settings
Parental
Parental Country
Parental Control
Parental Level
Parental Passw ord
USA
O
8[A udlt ]
Language
Audio
Display
Parental
System
Network

16
NS-WBRDVD Connected Blu-Ray Disc Player
www.insigniaproducts.com
Selecting the parental control country
If a Blu-ray Disc has parental rating systems for
more than one country, you can select the country
you want to use.
In the following task, when do you enter the
password?
To set the parental control country:
1Press SETUP. The Settings menu opens.
2Make sure that the Parental Control option is
set to On.
3Press , press or to select Parental, then
press ENTER. The Parental menu opens.
4Press or to select Parental County, then
press ENTER.
5Press one or more times to select the country
you want.
6Press to go to the previous menu, or press
SETUP to close the menu. Should this change to
“to return to the root menu?”
Setting the parental control level
To set the parental control level:
1Press SETUP. The Settings menu opens.
2Press , press or to select Parental, then
press ENTER. The Parental menu opens.
3If the Parental Control option is set to On, set
the option to Off. See “Turning parental controls
on or off” on page 15.
4Press or to select Parental Level, then press
ENTER.
5Press one or more times to select the rating
level you want to block. That rating and all
higher ratings will be blocked. You can select:
•1[Kid Safe]—Suitable for all children.
•2[G]—General audiences.
•3[PG]—Parental guidance suggested.
•4[PG-13]—Not suitable for anyone under 13.
•5[PGR]—Parental guidance recommended.
•6[R]—Not suitable for anyone under 17 unless
supervised by a parent or adult guardian.
•7[NC-17]—Not suitable for anyone under 17.
•8[Adult]—All DVDs can be played.
6Press , press or to select Parental Control,
then press ENTER. Press or to select Off.
7Press to go to the previous menu, or press
SETUP to close the menu.
Setting automatic disc playback mode
To set automatic disc playback mode:
1Press SETUP. The Settings menu opens.
2Press , press or to select System, then
press ENTER. The System menu opens.
3Press or to select Optical Disc Autoplay,
then press ENTER.
4Press or to On or Off. When On is selected
and you insert a Blu-ray Disc, files play back
automatically. When Off is selected and you
insert a Blu-ray Disc, the disc you can select are
displayed on the Settings menu.
5Press to go to the previous menu, or press
SETUP to return to the root menu.
Setting the BD-Live Internet access level
You can set the BD-Live Internet access level to
control access to BD-Live Broadcom.
To set the BD-Live Internet access level:
1Press SETUP. The Settings menu opens.
2Press , press or to select System, then
press ENTER. The System menu opens.
Note
Some Blu-ray Discs do not have multiple countries
encoded for parental controls.
Settings
Parental
Parental Country
Parental Control
Parental Level
Parental Passw ord
USA
O
8[A udlt ]
Language
Audio
Display
Parental
System
Network
Note
These ratings are for DVDs only.
Settings
System
Opt ical Disc Auto Play
BD- Live Inte rnet Access
BD- Live Storage
Erase B lu-ray Storage
Scr een Sav er D uration
CEC suppor t
Reset Settin gs
Update Via Network
On
Always Allo w
Internal (12 MB Free)
5 M inutes
O
Required St orage:84 MB
Language
Audio
Parent al
System
Network
Displa y
Settings
System
Opt ical Disc Auto Play
BD- Live Inte rnet Access
BD- Live Storage
Erase B lu-ray Storage
Scr een Sav er D uration
CEC suppor t
Reset Settin gs
Update Via Network
On
Always Allo w
Internal (12 MB Free)
5 M inutes
O
Required St orage:84 MB
Language
Audio
Parent al
System
Network
Displa y

17
Connected Blu-Ray Disc Player
www.insigniaproducts.com
3Press or to select BD-Live Internet Access,
then press ENTER.
4Press one or more times to select the access
level you want. You can select:
•Limit Access—Allows Internet access with
valid “BD-Live” network access approval.
•Always Allow Access—Always allows BD-Live
Internet access.
•Prohibit Access—Never allows BD-Live
Internet access.
5Press to go to the previous menu, or press
SETUP to return to the root menu.
Viewing available BD-Live storage space
To view available BD-Live storage space:
1Press SETUP. The Settings menu opens.
2Press , press or to select System, then
press ENTER. The System menu opens. The
available storage space is displayed next to
BD-Live Storage.
3Press to go to the previous menu, or press
ENTER to access the option and and delete
stored information. Review comment said to
change the text in red above to "to select
Internal or USB.” This does not seem to make
sense. Please explain.
Erasing BD-Live storage
To erase BD-Live storage:
1Press SETUP. The Settings menu opens.
2Press , press or to select System, then
press ENTER. The System menu opens.
3Press or to select Erase BD-Live Storage,
then press ENTER.
4Press or to select OK, then press ENTER. All
bookmarks and BD-live content saved in
memory are deleted.
5Press to go to the previous menu, or press
SETUP to return to the root menu.
Setting the screen saver activation time
Your player has a screen saver feature that turns the
screen black when your player is inactive. You can
set the amount of time you want your player to wait
before activating the screen saver.
To set the screen saver activation time:
1Press SETUP. The Settings menu opens.
2Press , press or to select System, then
press ENTER. The System menu opens.
3Press or to select Screen Saver Duration,
then press ENTER.
4Press one or more times to select the amount
of time you want the player to wait before
activating the screen saver feature.
5Press to go to the previous menu, or press
SETUP to return to the root menu.
Turning HDMI CEC support on or off
Depending on the TV, you may be able to use the
TV remote control to control some of your player’s
functions and the player’s remote control to
controls some of the TV’s functions. To use this
feature, turn HDMI CEC support on.
To turn HDMI CEC support on or off:
1Press SETUP. The Settings menu opens.
2Press , press or to select System, then
press ENTER. The System menu opens.
3Press or to select CEC Support, then press
ENTER.
4Press or to select On or Off.
5Press to go to the previous menu, or press
SETUP to return to the root menu.
Settings
System
Opt ical Disc Auto Play
BD- Live Inte rnet Access
BD- Live Storage
Erase B lu-ray Storage
Scr een Sav er D uration
CEC suppor t
Reset Settin gs
Update Via Network
On
Always Allo w
Internal (12 MB Free)
5 M inutes
O
Required St orage:84 MB
Language
Audio
Parent al
System
Network
Displa y
Settings
System
Opt ical Disc Auto Play
BD- Live Inte rnet Access
BD- Live Storage
Erase B lu-ray Storage
Scr een Sav er D uration
CEC suppor t
Reset Settin gs
Update Via Network
On
Always Allo w
Internal (12 MB Free)
5 M inutes
O
Required St orage:84 MB
Language
Audio
Parent al
System
Network
Displa y
Settings
System
Opt ical Disc Auto Play
BD- Live Inte rnet Access
BD- Live Storage
Erase B lu-ray Storage
Scr een Sav er D uration
CEC suppor t
Reset Settin gs
Update Via Network
On
Always Allo w
Internal (12 MB Free)
5 M inutes
O
Required St orage:84 MB
Language
Audio
Parent al
System
Network
Displa y
Settings
System
Opt ical Disc Auto Play
BD- Live Inte rnet Access
BD- Live Storage
Erase B lu-ray Storage
Scr een Sav er D uration
CEC suppor t
Reset Settin gs
Update Via Network
On
Always Allo w
Internal (12 MB Free)
5 M inutes
O
Required St orage:84 MB
Language
Audio
Parent al
System
Network
Displa y