Insignia NS-DPF1110W User manual

8” and 10” Digital Picture Frames
NS-DPF118S/NS-DPF1110W
User Guide
NS-DPF1110W_10-0827_MAN_ENG_V2.fm Page 1 Friday, July 30, 2010 11:01 AM

NS-DPF1110W_10-0827_MAN_ENG_V2.fm Page 2 Friday, July 30, 2010 11:01 AM

3
www.insigniaproducts.com
NS-DPF118S/NS-DPF1110W
8” and10” Digital Picture
Frames
Contents
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Safety information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Setting up your frame . . . . . . . . . . . . . . . . . . . . . . . . . . .11
Using your frame . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
Maintaining . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30
Troubleshooting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32
Legal notices. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32
6-month limited warranty . . . . . . . . . . . . . . . . . . . . . . .35
Introduction
Congratulations on your purchase of a high-quality Insignia
product. Your new digital picture frame is designed for
reliable and trouble-free performance.
NS-DPF1110W_10-0827_MAN_ENG_V2.fm Page 3 Friday, July 30, 2010 11:01 AM

4
NS-DPF118S/NS-DPF1110W
www.insigniaproducts.com
Safety information
Always follow these basic safety precautions when using
your digital picture frame. This will reduce the risk of fire,
electric shock, and injury.
Placement—To prevent fire or electric shock, do not expose
this digital picture frame to rain or moisture. To prevent it
from falling do not place it on an unstable cart, stand, tripod,
bracket, or table. Keep the unit away from strong magnets,
heat sources, direct sunlight, and excessive dust.
Installation—Make sure that the digital picture frame is used
in accordance with the instructions and illustrations
provided in this manual.
Objects and liquids—Do not push objects of any kind into
the digital picture frame through openings. Do not spill or
spray liquid of any kind on or in the digital picture frame (this
may result in a fire or electric shock). Do not place anything
heavy on the unit. To ensure proper ventilation and proper
operation, never cover or block the slots and openings with
a cloth or other material.
Disassembly—Do not attempt to disassemble the frame.
There is a risk of electric shock. Contact qualified service
personnel if your digital picture frame is in need of repair.
Cleaning the digital picture frame—When cleaning, make
sure the frame is unplugged from the power source. Use a
cloth slightly dampened with water for cleaning the exterior
of the frame only.
Warnings
To reduce the risk of fire or shock hazard, do not expose the
frame to rain or moisture and unplug the frame during
lightning storms.
To prevent the risk of electric shock, do not remove the
cover. There are no user-serviceable parts inside. Refer all
servicing to qualified personnel.
There is a risk of explosion if the battery is incorrectly
replaced. Replace only with the same or equivalent type of
battery.
NS-DPF1110W_10-0827_MAN_ENG_V2.fm Page 4 Friday, July 30, 2010 11:01 AM

5
www.insigniaproducts.com
Features
• Displays digital pictures (JPEG format) and picture
slideshows without a computer.
• Displays pictures directly from an inserted memory
card or USB device (not included)
• Bright, clear TFT LCD screen
• Compatible with a wide variety of memory cards,
including:
• Secure Digital™ (SD)
•SDHC™
• MultimediaCard (MMC™)
• Memory Stick®
• Memory Stick Pro Duo™ (requires an adapter -
not included)
•xD™
• microSD™ (requires an adapter - not included)
• Compatible with USB flash drives.
• Mini-USB connector to connect the digital picture
frame to your PC
• Multi-image mode displays multiple pictures at the
same time in a slideshow.
• Auto Rotate–pictures are rotated based on EXIF
data
• On-frame button controls and infrared remote
control.
• 128 MB internal memory.
Package contents
• Digital picture frame
• AC power adapter
•UserGuide
•QuickSetupGuide
• Remote control with battery (CR2025)
NS-DPF1110W_10-0827_MAN_ENG_V2.fm Page 5 Friday, July 30, 2010 11:01 AM

6
NS-DPF118S/NS-DPF1110W
www.insigniaproducts.com
Side (connectors)
#Description
1 Memory card slot, supports:
• Secure Digital™ (SD)
•SDHC™
• MultimediaCard (MMC™)
• Memory Stick®
• Memory Stick Pro Duo™ (requires an adapter - not
included)
•xD™
• microSD™
2USB(typeA)port
3 Mini USB port
4 DC 5 V power connector. Plug the AC adapter in here.
NS-DPF1110W_10-0827_MAN_ENG_V2.fm Page 6 Friday, July 30, 2010 11:01 AM

7
www.insigniaproducts.com
Back (buttons)
You can access most of the frame’s features by using either
the buttons on back of the frame or by using the remote
control. Selecting files for copying, deleting, or viewing
requires the remote control, and the instructions in this
guide refer to remote control buttons (except where noted).
# Button Description
1BACK Go back to previous selection or screen.
2 Up and Down
arrows
Press to navigate up or down.
3ENTER/ Press to select menu items. During a
slideshow, press to pause or resume.
4Leftarrow
Right arrows
Press to move the menu selection left or to
display the previous picture.
Press to move the menu selection right or to
display the next picture.
NS-DPF1110W_10-0827_MAN_ENG_V2.fm Page 7 Friday, July 30, 2010 11:01 AM

8
NS-DPF118S/NS-DPF1110W
www.insigniaproducts.com
5MENU/ Press to open the Setup menu. Press and hold
for two seconds to enter standby mode.
6 Power switch Slide the power switch up to turn on your
digital picture frame.
7 Keyed slot Attach the stand here.
#Button Description
NS-DPF1110W_10-0827_MAN_ENG_V2.fm Page 8 Friday, July 30, 2010 11:01 AM

9
www.insigniaproducts.com
Remote control
# Button Description
1 MENU Press to display the Setup menu.
2 SLIDE SHOW Press to start a slideshow or toggle the
multi-image Display mode.
3 (Up) Press to move the selection up.
4 ENTER Press to select the highlighted option
or to pause and resume the slideshow.
7
NS-DPF1110W_10-0827_MAN_ENG_V2.fm Page 9 Friday, July 30, 2010 11:01 AM

10
NS-DPF118S/NS-DPF1110W
www.insigniaproducts.com
5 (Left) PREV Press to move the menu selection up
or left, display the previous picture, or
select the previous file.
6 (Down) Press to move the menu selection
down.
7 BACK Press to go back a screen.
8 INFO Press to display information about the
picture.
9 ZOOM Press to magnify the picture.
10 (Right) NEXT Press to move the menu section right,
display the next picture, or select the
next file.
11 SELECT Press to select a picture or file to copy
or delete.
12 (thumbnail/folder) Press to enter Thumbnail mode, or to
display files and folders.
13 ROTATE Press to rotate the picture.
14 DEL/COPY Press to delete selected pictures from
internal memory or to copy selected
pictures from an inserted memory
card to internal memory.
#Button Description
NS-DPF1110W_10-0827_MAN_ENG_V2.fm Page 10 Friday, July 30, 2010 11:01 AM

11
www.insigniaproducts.com
Setting up your frame
Setting up the remote control
To set up the remote control:
• Remove the plastic tab that extends past the
bottom edge of the remote control. This tab
protects the battery. The remote control will not
work until it is removed.
NS-DPF1110W_10-0827_MAN_ENG_V2.fm Page 11 Friday, July 30, 2010 11:01 AM

12
NS-DPF118S/NS-DPF1110W
www.insigniaproducts.com
Setting up the frame
To set up the frame:
1Align the keyed stand with the keyed slot in the back of
the frame, then turn the stand.
2Turn the stand counterclockwise 1/4 turn to lock it into
place.
NS-DPF1110W_10-0827_MAN_ENG_V2.fm Page 12 Friday, July 30, 2010 11:01 AM

13
www.insigniaproducts.com
3Place the frame on a flat, stable surface in landscape
orientation.
4To set the frame up for portrait orientation, turn the
stand counterclockwise 90°.
NS-DPF1110W_10-0827_MAN_ENG_V2.fm Page 13 Friday, July 30, 2010 11:01 AM

14
NS-DPF118S/NS-DPF1110W
www.insigniaproducts.com
5Place the frame on a flat, stable surface in portrait
orientation.
6Adjust the stand by pulling it out from the frame, to
change the viewing angle of the frame.
NS-DPF1110W_10-0827_MAN_ENG_V2.fm Page 14 Friday, July 30, 2010 11:01 AM

15
www.insigniaproducts.com
7Plug the AC power adapter into the frame’s DC power
connector and into an AC power outlet.
8Slide the power switch to the ON position. The frame
automatically turns and starts playing a slideshow of the
pictures stored in internal memory. This slideshow is
called Demo mode.
To turn off Demo mode, point the remote control at the
front of the frame and press ENTER.
Tip
You can also disable and re-enable Demo mode
from the Setup menu. For instructions, see “Setup
options” on page 27.
Plug the AC adapter
into this jack.
NS-DPF1110W_10-0827_MAN_ENG_V2.fm Page 15 Friday, July 30, 2010 11:01 AM

16
NS-DPF118S/NS-DPF1110W
www.insigniaproducts.com
Using your frame
You can use your digital picture frame to:
• Play a slideshow of pictures
• Adjust a picture’s view
•Changedisplaysettings
Playing slideshows
To play an instant slideshow from a memory
card or USB device:
1Insert a memory card or USB device into the memory
slot or the USB port.
A slideshow of pictures from the memory card or USB
device automatically starts to play.
2Press (ENTER/ ) to pause the slideshow on a
particular picture. Press (ENTER/ ) again to
resume the slideshow.
To manually play a slideshow from an
inserted memory card, a USB device, or from
internal memory:
1Insert a memory card or USB drive into the memory slot
or the USB port. A slideshow of pictures from the
memory card or USB device automatically starts to play.
Caution
Memory cards fit into the card slots in only one
direction. Do not force a memory card into a slot.
The card should fit snugly when inserted
correctly. Some cards require an adapter to fit
correctly. For more information on supported
memory cards, see “Specifications” on
page 32.
NS-DPF1110W_10-0827_MAN_ENG_V2.fm Page 16 Friday, July 30, 2010 11:01 AM

17
www.insigniaproducts.com
2Press (BACK) repeatedly until the Home menu
opens.
3Press or to select a memory device or an existing
memory card.
4Press SLIDESHOW. A slideshow begins that displays
the pictures contained in the memory device you
selected.
Note
The option to select a media type or USB device is
disabled if there is no media of that type in the
corresponding slot or port.
Tip
You can press (thumbnail/file list) to switch
between thumbnail mode and file list mode.
Thumbnail mode displays all files in the selected
memory device, and file list mode displays files
and folders.
Tip
Press SLIDESHOW during a slideshow to switch
to multi-image slideshow mode. Press
SLIDESHOW again to return to single image display
mode.
NS-DPF1110W_10-0827_MAN_ENG_V2.fm Page 17 Friday, July 30, 2010 11:01 AM

18
NS-DPF118S/NS-DPF1110W
www.insigniaproducts.com
Copying pictures to internal memory
You can copy a single picture, multiple pictures, or all
pictures from an inserted memory card or USB device to the
frame’s internal memory.
To copy selected pictures to internal
memory:
1Press (BACK) repeatedly until the Home screen
opens.
Notes
Using the frame alone, you cannot copy pictures from
the internal memory to an inserted memory card or USB
device, and you cannot copy pictures from one inserted
memory card or USB device to another.
Because you cannot copy pictures back from the frame
to a memory card or USB device using the frame, the
frame should not be considered your primary picture
storage method. Make sure that you have the pictures
stored elsewhere (such as a memory card).
To copy pictures from the internal memory to an
inserted memory card or USB device, you can use a USB
cable to connect the frame to a computer. You can then
copy pictures between an inserted memory card or USB
device, the frame's internal memory, and the computer.
NS-DPF1110W_10-0827_MAN_ENG_V2.fm Page 18 Friday, July 30, 2010 11:01 AM

19
www.insigniaproducts.com
2Press or to highlight the memory card or USB
device you want to copy from, then press (ENTER/
). The Thumbnail screen opens.
3Press or to highlight each picture you want to
copy, then press (SELECT) to mark it. A check mark
appears in the upper-right corner of each marked
thumbnail. Mark as many pictures as you want to copy.
4Press (DEL/COPY), then press or to select
Copy Selected (to copy the pictures you select), or
Copy All (to copy all pictures).
5Press to open the submenu, then press or to
select Yes.
6Press (ENTER/ ), then press or to select
Yes. The pictures are copied.
NS-DPF1110W_10-0827_MAN_ENG_V2.fm Page 19 Friday, July 30, 2010 11:01 AM

20
NS-DPF118S/NS-DPF1110W
www.insigniaproducts.com
To copy pictures from your PC to internal
memory or connected memory device:
1Make sure that your computer has been started before
you begin.
2Connect the mini plug of the supplied USB cable to the
mini USB port on the digital picture frame, then connect
the other end to an available USB port on your
computer.
3Navigate to "My Computer" (Windows operating
systems). The frame's internal memory and any inserted
memory card or USB devices appear as “removable
disks.” Each memory area appears as a separate
removable disk.
4Use your computer's standard drag and drop or copy
and paste procedures to move pictures on your
computer to the frame's internal memory or a memory
card you inserted in the frame.
Deleting pictures from internal
memory
Note
You cannot delete pictures from an inserted
memory card or USB device. Because you cannot
copy pictures back from the frame to a memory
card, the frame should not be considered your
primary picture storage method. Make sure that
you have the pictures stored elsewhere (such as a
memory card).
NS-DPF1110W_10-0827_MAN_ENG_V2.fm Page 20 Friday, July 30, 2010 11:01 AM