Insignia NS-50L260A13 User manual

Please Note: Connect your Yellow video
cable to the Green Y/Video jack.
*
Power
indicator
Remote
control sensor
CH
VOL
VOL
MENU
INPUT
CH
Front features
Installing the stand
1Carefully place your TV screen face-down on a cushioned, clean surface to protect the
screen from damages and scratches.
2 Attach the stand to the bottom of the screen by aligning the stand column to the stand,
then secure the stand to the stand column with the four provided screws.
Installing a wall-mount bracket
1 Carefully place your TV screen face-down on a cushioned, clean surface to protect the
screen from damages and scratches.
2 Remove the four screws securing the TV to its stand column, then remove the stand
column.
3 Attach the wall-mount bracket to your TV using the mounting holes on the back of your
TV. See the instructions that came with the wall-mount bracket for information about how
to correctly hang your TV.
Connecting a DVD or Blu-ray player, cable box,
satellite receiver, camcorder, or game station
Using an HDMI cable (best)
Using component cables (better)
Using composite cables (good)
Connecting an antenna/cable wall jack
Connect a coaxial cable (not included) to the ANT/CABLE IN jack on the back side of your TV
and to the antenna/cable wall jack.
Connecting a Home Theater System
Using digital audio
Using analog audio
Connecting power
Plug the AC power cord into the AC IN jack
on the back of your TV, then plug the other
end of the cord into a power outlet.
50" LCD TV
QUICK SETUP
GUIDE
NS-50L260A13
Thank You
for purchasing this ne Insignia television.
We hope you enjoy the quality and reliability
of this product for years to come.
_______________________________
Remote control and
two AAA batteries
TV stand and four M5 screws (8 mm)
AC power cable
Note: Cable is not provided.
Note: Cable is not provided.
Note: Cable is not provided.
Note: Cables are not provided.
AUDIO/VIDEO
OUT
CABLE
COMPONENT
OUT
This apparatus is intended to be supported by a UL Listed wall mount bracket.
Warning
OR
Composite video
and analog audio
OR
Identifying cables
Your TV has several connection types for connecting devices. For the best video quality, connect
a device to the best available connection.
You can use the HDMI 1/DVI jack to connect a DVI device to your TV. You need to attach an
HDMI-to-DVI adapter to the end of the HDMI cable that connects to the DVI device’s jack.
Connection type Video quality Cable connector
HDMI video/audio Best
Component video
and analog audio
Better
Good
WE ARE GOING GREEN!
A copy of your User Guide is not provided in
the box but is available online.
Go to www.insigniaproducts.com,
click Support & Service, enter your model
number in the Product Search eld,
then click Search.
Note: The appearance of your
actual TV may dier from the
illustrations in this Guide.
Wall jack
H D MI 2
A N T /
C A B L E I N
DIG ITA L
O U T P U T
( A R C )
H D MI 1
( D V I)
( C O A X I AL )
H D MI 3
V I D E O
AUDIO
L
R
C O MP ON E NT
IN
PB
P R
AV I N Y
/
A U DI O O U T
AUDIO
VGA
P C I N
U S B
H D MI 2
A N T /
C A B L E I N
DIG ITA L
O U T P U T
( A R C )
H D MI 1
( D V I)
( C O A X I AL )
H D MI 3
V I D E O
AUDIO
L
R
C O MP ON E NT
IN
PB
P R
AV I N Y
/
A U DI O O U T
AUDIO
VGA
P C I N
U S B
H D MI 2
A N T /
C A B L E I N
DIG ITA L
O U T P U T
( A R C )
H D MI 1
( D V I)
( C O A X I AL )
H D MI 3
V I D E O
AUDIO
L
R
C O MP ON E NT
IN
PB
P R
AV I N Y
/
A U DI O O U T
AUDIO
VGA
P C I N
U S B
H D MI 2
A N T /
C A B L E I N
DIG ITA L
O U T P U T
( A R C )
H D MI 1
( D V I)
( C O A X I AL )
H D MI 3
V I D E O
AUDIO
L
R
C O MP ON E NT
IN
PB
P R
AV I N Y
/
A U DI O O U T
AUDIO
VGA
P C I N
U S B

Power outlet
Power cord
Universal remote TV codes
50" LCD TV IQUICK SETUP GUIDE I NS-50L260A13
Antenna or
cable TV
(no box)
Blu-ray player/DVD player/VCR Cable or satellite TV box
AV receiver
Game console
or camera
USB ash drive
Computer
Front features
Installing the stand
1Carefully place your TV screen face-down on a cushioned, clean surface to protect the
screen from damages and scratches.
2 Attach the stand to the bottom of the screen by aligning the stand column to the stand,
then secure the stand to the stand column with the four provided screws.
Installing a wall-mount bracket
1 Carefully place your TV screen face-down on a cushioned, clean surface to protect the
screen from damages and scratches.
2 Remove the four screws securing the TV to its stand column, then remove the stand
column.
3 Attach the wall-mount bracket to your TV using the mounting holes on the back of your
TV. See the instructions that came with the wall-mount bracket for information about how
to correctly hang your TV.
Connecting a DVD or Blu-ray player, cable box,
satellite receiver, camcorder, or game station
Using an HDMI cable (best)
Using component cables (better)
Using composite cables (good)
Connecting an antenna/cable wall jack
Connect a coaxial cable (not included) to the ANT/CABLE IN jack on the back side of your TV
and to the antenna/cable wall jack.
Connecting a Home Theater System
Using digital audio
Using analog audio
Connecting power
Plug the AC power cord into the AC IN jack
on the back of your TV, then plug the other
end of the cord into a power outlet.
ENGLISH 12-0545
Setting up and using your remote control
1Press the release button on the back of the remote control to remove
the battery compartment cover.
2Insert two AAA batteries into the battery compartment. Make sure that
the + and – symbols on the batteries match the + and – symbols in the
battery compartment.
3Replace the cover.
Universal remote TV codes
Universal remote controls Cable/Satellite/Set-top boxes
One for All Philips RCA Sony Cablevision Charter Comcast Cox Direct TV Dish Network Time Warner Tivo Verizon
0054 0198,
0490
135 1326,
1463
0198,
0490
400, 450, 461, 456,
10463, 1463, 0463
0091068, 069, 078,
096, 100, 164,
168, 229, 026
2002, 1204, 1423, 1517,
0171, 1963, 0463, 1463,
0842, 1326, 167, 415, 424,
450, 456, 461, 507, 523, 567,
577, 586
10171, 11204, 11326,
11517, 11564, 11641,
11963, 12002
720
068, 069,
078, 096,
100, 164,
168, 229,
026
10171, 11204, 11326,
11463, 11517, 11641,
11780, 11785, 11892,
11963, 12002
Programming your remote control
To program your universal remote control to work with your new Insignia TV, see the table for common codes. If you have problems programming your remote or need a
dierent remote control code, visit www.insigniaproducts.com for the latest remote control code information.
Connecting a home theater system with multiple devices
We recommend that you connect
the AV receiver’s HDMI OUT jack
to your TV’s HDMI2 IN (ARC) jack.
In the following situations, the
HDMI cable will route Dolby
Digital audio to the AV receiver,
so you do not need to connect a
separate digital audio cable:
• When you have a game console
connected to your TV’s HDMI 1
or HDMI 3 jacks.
• When you watch a program
through an antenna or cable
T V connected to the
ANT/CABLE IN jack.
Note: Cable is not provided.
Note: Cable is not provided.
One-year limited warranty
Visit www.insigniaproducts.com for details.
Need additional help?
See your Online User Guide! This
comprehensive guide includes everything
from basic how-to steps to more advanced
features. A copy of your User Guide is not
provided in the box but is available online. Go
to www.insigniaproducts.com, click Support
& Service, enter your model number in the
Product Search eld, then click Search.
Check out our online community forum at
www.insigniaproducts.com for helpful
information from other Insignia TV owners.
We’re here for you
www.insigniaproducts.com
For customer service, call:
877-467-4289 (U.S./Canada markets)
Distributed by Best Buy Purchasing, LLC
7601 Penn Avenue South, Richeld, MN USA 55423-3645
© 2012 BBY Solutions, Inc.
All rights reserved. INSIGNIA is a trademark of BBY Solutions, Inc.
Registered in some countries. All other products and brand
names are trademarks of their respective owners.
WE ARE GOING GREEN!
A copy of your User Guide is not provided in
the box but is available online.
Go to www.insigniaproducts.com,
click Support & Service, enter your model
number in the Product Search eld,
then click Search.
Turning on your TV for the rst time
1Connect your TV’s power cord to a power outlet, then press (power).
The Choose Your Menu Language screen opens.
2Press ▲or ▼to highlight a language, then press ENTER. The Choose Your Time Setting screen
opens with Mode highlighted.
3Press ◄or ►to select Auto or Manual. If you select Auto, the date and time are set
automatically from a digital TV signal. If you select Manual, you can manually set the
date and time. Press ENTER. The Choose Your Picture Mode screen opens.
4Press ▲or ▼to highlight Home Mode or Retail Mode, then press ENTER. If you select Retail
Mode, a message asks you to conrm your selection. Select Ye s or No. Retail mode is not
an energy-saving mode. The Choose Your TV Source screen opens.
5Press ▲or ▼to highlight Antenna, Cable, or Satellite Box, then press ENTER.
A. If you select Antenna, your TV scans for available channels. The scan may take
several minutes.
B. If you select Cable, a message asks if you have a cable box.
• Select No if no cable box is connected. Your TV scans for available channels. The scan may
take several minutes.
• Select Ye s if a cable box is connected. A message asks how you connected the cable box
to your TV:
• Select AV, Component, or HDMI if you connected a cable box to your TV using one of
these cables. Read the message, then press ENTER to close the wizard.
• Select Coaxial if you connected a cable box to your TV using a coaxial cable. Read the
message, then press ENTER to start the channel scan (VHF channels only).
C. If you select Satellite Box, a message asks how you connected the satellite box to your TV:
• Select AV, Component, or HDMI if you connected a satellite box to your TV using one of
these cables. Read the message, then press ENTER to close the wizard.
• Select Coaxial if you connected a satellite box to your TV using a coaxial cable. Read the
message, then press ENTER to start the channel scan (VHF channels only)
AUDIO IN
H D MI 2
A N T /
C A B L E I N
DIG ITA L
O U T P U T
( A R C )
H D MI 1
( D V I)
( C O A X IA L )
H D MI 3
V I DE O
AUDIO
L
R
C O MP ON E NT
IN
PB
P R
AV I N Y
/
AU D I O O U T
AUDIO
VGA
P C I N
U S B
COAXIAL IN
H D MI 2
A N T /
C A B L E I N
DIG ITA L
O U T P U T
( A R C )
H D MI 1
( D V I)
( C O A X IA L )
H D MI 3
V I DE O
AUDIO
L
R
C O MP ON E NT
IN
PB
P R
AV I N Y
/
AU D I O O U T
AUDIO
VGA
P C I N
U S B
Digital audio cable (coaxial)
Normal:
Displays the original 4:3 aspect ratio with vertical black bars on the
left and right sides of the screen. If the original aspect ratio is
16:9, the image displays in 16: 9 .
Zoom:
Expands the image to ll the screen. The top and bottom of the image
may be cropped.
Wide:
Use this option to view content recorded in a 16:9 (wide-screen) aspect ratio.
Cinema:
Stretches the image at the edges, but keeps a clear image in the center.
Auto:
Automatically adjusts the image based on the screen size and the TV
program. Note:Auto is only available when Auto Zoom in the
CHANNELS menu is set to On.
Aspect ratio options
*
TV
HDMI1
HDMI2
USB
INPUT SOURCE
VGA
COMP/AV
HDMI3
Move
OK
E NT E R
ME NU E XI T
Exit
Previous
Se lec t
Adjust settings to affect picture quality
Picture Audio
C ha nn els
S ettin gs
P ho tos
Picture
Picture Mode
Brightness
Contrast
Color
Tint
Custom
60
Sharpness
Advanced Video
R e s et P ic ture S ettin gs
60
60
0
50
Power
Turns your TV on or o.
Numbers
Enter channel numbers.
.
Enters a digital sub-channel
number (e.g. 4.1).
MENU
Opens the on-screen menu.
EXIT
Closes the on-screen menu.
ENTER
Conrms selections or changes.
INPUT
Opens the Input Source list.
CH-LIST
Opens the channel list.
Volume
Changes the volume.
SLEEP
Sets the sleep timer.
ZOOM
Changes how the picture
displays on the screen.
INlink Controls
Controls HDMI-CEC devices
connected to your TV.
RECALL
Returns to the previous channel.
HOME
Opens the on-screen menu.
Arrows
Navigates in on-screen menus.
INFO*
Opens a TV status banner.
CCD
Turns closed captioning on or o.
FAVORITE
Opens the Favorite Channel List.
Channel
Changes the TV channels.
Mute
Mutes the sound.
PICTURE
Selects the picture mode.
MTS/SAP
Cycles through mono, stereo, and
secondary audio for analog programs.
AUDIO
Selects the sound mode.
Quick Launch Inputs
Selects another source connected to
your TV. Note: The ACC button has no
function.
5or63or
4
English
Choose Your Menu Language
Move
OK
E NT E R
ME NU E XI T
Exit
Previous
Se lec t
Set menu language to English, or
Fran aisç
Español
Move
OK
E N T E R
ME NU E XI T
Exit
Previous
Se lec t
Choose Your Time Setting
Mode Auto
Time Zone Atlantic
Daylight Savings On
Year 2012
Month October
Day 28
Time 08:07 AM
If automatic, options are automatically set by TV source
Move
OK
E NT E R
ME NU E XI T
Exit
Previous
Se lec t
Choose Your Picture Mode
Reduces total power consumption
Home Mode
Retail Mode
Fran aisçEspa ñol
234
Analog Channels
Digital Channels
Scanning for Channels
0
Move
OK
E N T E R
ME NU E XI T
Exit
Previous
Se lec t
0
Choose Your TV Source
Antenna
Cable
Satellite Box
Move
OK
E NT E R
ME NU E XI T
Exit
Previous
Se lec t
Select if using an antenna for standard or HD TV
5A
Channel scan may take 20+ minutes
Choose Your TV Source
Antenna
Cable
Satellite Box
Move
OK
E NT E R
ME NU E XI T
Exit
Previous
Se lec t
Select if you have cable service.
Do you have a Cable Box?
No
Yes
Move
OK
E NT E R
ME NU E XI T
Exit
Previous
Se lec t
How did you connect the
AV, Component, or HDMI
Coaxial
Move
OK
E NT E R
ME NU E XI T
Exit
Previous
Se lec t
cable box to the TV?
Choose Your TV Source
Antenna
Cable
Satellite Box
Move
OK
E NT E R
ME NU E XI T
Exit
Previous
Se lec t
Select if you have a satellite box.
How did you connect the
AV, Component, or HDMI
Coaxial
Move
OK
E NT E R
ME NU E XI T
Exit
Previous
Se lec t
satellite box to the TV?
5B
5C
Channel scan may take 20+ minutes
This illustration is for reference only.
The AC IN jack position may vary by model.