Insignia NS-19E310A13 User manual

Before using your new product, please read these instructions to prevent any damage.
This apparatus is intended to be supported by a UL Listed wall mount bracket.
Warning
OR
Composite video
and analog audio
OR
Identifying cables
Your TV has several connection types for connecting devices. For the best video quality, connect
a device to the best available connection.
You can use the HDMI 1(DVI) jack to connect a DVI device to your TV. You need to attach the
HDMI-to-DVI adapter to the end of the HDMI cable that connects to the DVI device’s jack.
Connection type Video quality Cable connector
HDMI video/audio Best
Component video
and analog audio
Better
Good
WE ARE GOING GREEN!
A copy of your User Guide is not provided in
the box but is available online.
Go to www.insigniaproducts.com,
then click Support & Service. Enter your
model number in the box under Manual,
Firmware, Drivers & Product Information,
then click .
AUDIO/VIDEO
OUT
CABLE
AUDIO/VIDEO
OUT
HDMI 2
(ARC)
PB
L - AUDIO - R VIDEO/Y USB
PR
COMPONENT IN AUDIO
OUT
AV IN
HDMI 2
(ARC)
PB
L - AUDIO - R VIDEO/Y USB
PR
COMPONENT IN AUDIO
OUT
AV IN
HDMI 2
(ARC)
PB
L - AUDIO - R VIDEO/Y USB
PR
COMPONENT IN AUDIO
OUT
AV IN
Front features
Installing the stand
1Carefully place your TV screen face-down on a cushioned, clean surface to protect
the screen from damages and scratches.
2 Secure the stand to the screen with the two provided screws.
Installing a wall-mount bracket
1 Carefully place your TV screen face-down on a cushioned, clean surface to protect
the screen from damages and scratches.
2 Remove the four screws that secure the stand column, then remove the column.
3 Attach the wall-mount bracket to your TV using the mounting holes on the back
of your TV. See the instructions that came with the wall-mount bracket for
information about how to correctly hang your TV.
Connecting a DVD or Blu-ray disc player, cable box,
satellite receiver, camcorder, or game station
Using an HDMI cable (best)
Using component cables (better)
Using an AV cable (good)
Connecting an antenna/cable wall jack
Connect a coaxial cable to the ANT/CABLE IN jack on the back of your TV and to the
antenna/cable wall jack.
19" 720p LED HDTV
QUICK SETUP
GUIDE
NS-19E310A13
Thank You
for purchasing this ne Insignia television.
We hope you enjoy the quality and reliability of this
product for years to come.
_______________________________
Remote control
and 2 AAA
batteries
Power cable
Remote control sensor
Power indicator
M4 type (10 mm length) (2 pcs)
M4 type (8 mm length) (4 pcs)
Note: Cable is not provided.
Note: Cables are not provided.
Connect the yellow connector
to the green VIDEO/Y jack.
Note: Cable is not provided.
Note: Cable is not provided.
DC IN
(12V) HDMI 1 (DVI)
VGA
PC IN ANT/ CABLE IN
PC/DVI
AUDIO DIGITAL
OUTPUT
(COAXIAL)
DC IN
(12V) HDMI 1 (DVI)
VGA
PC IN ANT/
CABLE IN
PC/DVI
AUDIO DIGITAL
OUTPUT
(COAXIAL)
TV stand

V7 ENGLISH 13-0031
One-year limited warranty
Visit www.insigniaproducts.com for details.
Need additional help?
See your online User Guide! This
comprehensive guide includes everything
from basic how-to steps to more advanced
features. A copy of your User Guide is not
provided in the box but is available online.
Go to www.insigniaproducts.com,
then click Support & Service. Enter your
model number in the box under Manual,
Firmware, Drivers & Product Information,
then click .
Check out our online community forum at
www.insigniaproducts.com for helpful
information from other Insignia TV owners.
We’re here for you
www.insigniaproducts.com
For customer service, call:
877-467-4289 (U.S./Canada markets)
INSIGNIA is a registered trademark of BBY Solutions, Inc.
Registered in some countries.
Distributed by Best Buy Purchasing, LLC,
7601 Penn Ave South, Richeld, MN 55423 U.S.A.
©2013 BBY Solutions, Inc.
All Rights Reserved
1-877-467-4289
www.insigniaproducts.com
19" 720p LED HDTV IQUICK SETUP GUIDE I NS-19E310A13
WE ARE GOING GREEN!
A copy of your User Guide is not provided in
the box but is available online.
Go to www.insigniaproducts.com,
then click Support & Service. Enter your
model number in the box under Manual,
Firmware, Drivers & Product Information,
then click .
Universal remote TV codes
Turning on your TV for the rst time
1Connect your TV’s power cord to the TV and a power outlet, then press (power). The Choose Your
Menu Language screen opens.
2Press ▲or ▼to highlight a language, then press ENTER. The Choose Your Time Settings screen opens.
3Press ◄or ►to select Auto or Manual. If you select Auto, the date and time are set automatically
from a digital TV signal. If you select Manual, you can manually set the date and time. Press ENTER.
The Choose Your Picture Mode screen opens.
4Press ▲or ▼to highlight Home Mode or Retail Mode, then press ENTER. If you select Retail
Mode, a message asks you to conrm your selection. Select Yes or No. Retail Mode is not an
energy-saving mode. The Choose Your TV Source screen opens.
5Press ▲or ▼to highlight Antenna, Cable, or Satellite box, then press ENTER.
A. If you select Antenna, your TV scans for available channels. The scan may take several minutes.
B. If you select Cable, a message asks if you have a cable box.
• Select No if no cable box is connected. Your TV scans for available channels. The scan may take
several minutes.
• Select Yes if a cable box is connected. A message asks how you connected the cable box to yourTV:
• Select AV, Component, or HDMI if you connected a cable box to your TV using one of these
cables. Read the message, then press ENTER to close the wizard.
• Select Coaxial if you connected a cable box to your TV using a coaxial cable. Read the
message, then press ENTER to start the channel scan (VHF channels only).
C. If you select Satellite box, a message asks how you connected the satellite box to your TV:
• Select AV, Component, or HDMI if you connected a satellite box to your TV using one of these
cables. Read the message, then press ENTER to close the wizard.
• Select Coaxial if you connected a satellite box to your TV using a coaxial cable.
Read the message, then press ENTER to start the channel scan (VHF channels only).
Choose Your TV Source
MOVE SELECT PREVIOUS
Antenna
Cable
Satellite box
EXIT
Select if you have a satellite box.
Choose Your TV Source
MOVE SELECT PREVIOUS
Antenna
Cable
Satellite box
EXIT
Select if you have cable service.
Choose Your TV Source
MOVE SELECT PREVIOUS
Antenna
Cable
Satellite box
EXIT
Select if using an antenna for standard or HD TV
How did you connect the
cable box to the TV?
AV, Component, or HDMI
Coaxial
Move Select Previous Exit
Do you have a Cable Box?
No
Yes
Move Select Previous Exit
Choose Your Time Setting
Mode
Time Zone
Daylight Savings
Year
Month
Day
Time
Auto
Pacific
On
2012
January
01
00:00 AM
Move Select Previous Exit
If Automatic, options are automatically set by TV source
Choose Your Picture Mode
Home Mode
Retail Mode
Reduces total power consumption
Move Select Previous Exit
Choose Your Menu Language
English
Français
Español
Set menu language to English,Français,Español
Move Select Previous Exit
HDMI 2
(ARC)
PB
L - AUDIO - R VIDEO/Y USB
PR
COMPONENT IN AUDIO
OUT
AV IN
Setting up and using your remote control
1Press the release button on the back of the remote control to remove the
battery compartment cover.
2Insert two AAA batteries into the battery compartment. Make sure that
the + and – symbols on the batteries match the + and – symbols in the
battery compartment.
3Replace the cover.
Universal remote TV codes
Universal remote controls Cable/Satellite/Set-top boxes
One for All Philips RCA Sony Cablevision Charter Comcast Cox Direct TV Dish Network Time Warner Tivo Verizon
0054 0198,
0490
135 1326,
1463
0198,
0490
400, 450, 461, 456,
10463, 1463, 0463
0091068, 069, 078,
096, 100, 164,
168, 229, 026
2002, 1204, 1423, 1517,
0171, 1963, 0463, 1463,
0842, 1326, 167, 415, 424,
450, 456, 461, 507, 523, 567,
577, 586
10171, 11204, 11326,
11517, 11564, 11641,
11963, 12002
720
068, 069,
078, 096,
100, 164,
168, 229,
026
10171, 11204, 11326,
11463, 11517, 11641,
11780, 11785, 11892,
11963, 12002
Programming your remote control
To program your universal remote control to work with your new Insignia TV, see the table for common codes. If you have problems programming your remote or need a
dierent remote control code, visit www.insigniaproducts.com for the latest remote control code information.
Input Source
TV
Comp/AV
HDMI 1
HDMI 2
VGA
USB
Antenna or
cable TV
(no box)
Blu-ray player/DVD player/VCR Cable or satellite TV box
AV receiver
Game console
or camera
USB ash drive
Computer
DC IN
(12V) HDMI 1 (DVI)
VGA
PC IN ANT/
CABLE IN
PC/DVI
AUDIO DIGITAL
OUTPUT
(COAXIAL)
OPTICAL
AUDIO IN
Connecting a home theater system
Using digital audio
Using analog audio
Connecting power
Plug the power cord into the DC IN jack on the back
of your TV, then plug the other end of the cord into
a power outlet.
Connecting a home theater system with multiple devices
We recommend that you connect
the AV receiver’s HDMI OUT jack
to your TV’s HDMI 2 (ARC) jack.
In the following situations, the
HDMI cable routes Dolby Digital
audio to the AV receiver, so you
do not need to connect a
separate digital audio cable:
• When you have a game console
connected to one of your TV’s
HDMI IN jacks.
• When you watch a program
through an antenna or cable TV
connected to the ANT IN jack.
Normal:
Original aspect ratio is preserved. Black bars are
present if content is not widescreen (16:9).
Zoom:
Expands the image to ll the screen. The top and
bottom of the image may be cropped.
Wide:
Use this option to view content recorded in a
16:9 (wide-screen) aspect ratio.
Cinema:
Stretches the image at the edges, but keeps a clear
image in the center.
Auto:
Automatically adjusts the image based on the
screen size and the TV program. Note: Auto is only
available when Auto Zoom in the CHANNELS menu
is be set to On.
Aspect ratio options
Note: Cable is not provided.
AUDIO
LR
Note: Cable is not provided.
2
1
3
5A
5B
5C
Channel scan may take 20+ minutes
EXIT
Move Select Previous Exit
Scanning for channels
0 Digital Channels
0 Analog Channels
Channel scan may take 20+ minutes
EXIT
Move Select Previous Exit
To watch TV
1.Turn on your satellite box.
2.Press INPUT on your TV’s remoto control.
3.Press ▲or ▼to select the video input source that
matches how you connected your satellite box(AV,
Component. or HDMI).
FINISH
How did you connect the
satellite box to the TV?
AV, Component, or HDMI
Coaxial
Move Select Previous Exit
INPUT
Opens the INPUT SOURCE list.
RECALL
Returns to the previous channel.
Arrows
Navigate in on-screen menus.
HOME
Opens the on-screen menu.
INFO*
Opens a TV status banner.
CCD
Turns closed captioning on or o.
MUTE
Mutes the sound.
Channel
Changes the TV channels.
MTS/SAP
ATV – Cycles through mono, stereo,
and secondary audio for analog
programs.
DTV – Selects the audio language
from current channel.
PICTURE
Selects the picture mode.
AUDIO
Selects the audio mode.
Power
Turns your TV on or o.
Numbers
Enter channel numbers.
Enters a digital sub-channel
number (for example 4.1).
ENTER
Conrms selections or changes.
MENU
Opens the on-screen menu.
EXIT
Closes the on-screen menu.
ASPECT
Changes how the picture is
displayed on the screen.
Volume
Changes the volume.
SLEEP
Sets the sleep timer.
FAVORITE
Opens the Favorite Channel List.
INlink media controls
Control HDMI-CEC devices
connected to your TV.