Insignia NS-50D421NA16 User manual

P P
L R
COMPONENT IN
AV IN
- AUDIO -
Your TV has four VESA mounting holes on the back. If you attach a
wall-mount bracket to the back of your TV, the bracket must
be securely attached, using all four holes. If you do not use
all four mounting holes, your TV may fall and cause property
damage or personal injury. See the documentation that
came with your wall-mount for complete mounting
instructions.
Quick Setup Guide | NS-50D421NA16
50" 1080p 60 Hz DLED TV
2MAKING CONNECTIONS
How do I watch TV (cable, satellite, or antenna) or connect a device, such as a DVD or Blu-ray disc player or game console?
FEATURES
1START HERE
How do I attach the stand to my TV? (not for wall mounting)
You’ll need: Soft surface and
Phillips screwdriver
WALL MOUNT
How do I prepare my TV for wall mounting? (not for use with a TV stand)
FIND YOUR USER GUIDE ONLINE!
Go to www.insigniaproducts.com, then
click Support & Service. Enter
NS-50D421NA16 in the box under
Manual, Firmware, Drivers & Product
Information, then click ► .
STOP
Do not plug your power cord in until all
other devices have been connected.
!
BMake sure that the arrows on the bottoms of the stands point the same direction as the TV screen.
Align the screw holes on the TV stands with the holes on the bottom of your TV, then secure each
stand with two of the M4 × 20 mm screws.
APlace your TV face-down on a cushioned,
clean surface.
Before using your new product, please read these
instructions to prevent any damage.
INCLUDED ACCESSORIES
Remote control and
two AAA batteries
Stand bases
M4 screws (20 mm length) (4 pcs.)
Power cord
AAA
+
AAA
+
AB
B
A
AUDIO/VIDEO OUT
AUDIO/VIDEO OUT
CABLE
WHICH CABLES
DO YOU HAVE?
ANT/CABLE IN
OR
OR
ACarefully place your TV face-down on a cushioned, clean surface.
BInsert the four provided spacers into the mount screw holes on the back of your TV, then attach
the wall-mount bracket to your TV using either the four M6 × 30 mm screws (provided)or the
screws that came with the wall-mount bracket.
Warning: This apparatus is intended to be supported by a UL Listed wall-mount bracket.
CSee the instructions that came with your wall-mount for more information about which screws to
use and how to correctly mount your TV.
Multi-purpose jacks: You can plug any device that uses HDMI into any HDMI jack. However,
certain devices must be connected to the HDMI/ARC jack. See the instructions that came with
your device for more information.
Note: Connect the yellow
video cable to the green
VIDEO/Y jack.
HDMI (BEST)
Best video quality
COMPONENT
BETTER
AV (GOOD)
COAXIAL
GOOD
Note: The component and AV jacks
are shared. This means you can connect
only one component or AV device at a
time. We suggest upgrading to
HDMI
(BEST)if your device supports it.
M6 screws (30 mm length) (4 pcs.)
Spacers (4 pcs.)
C
WALL MOUNT ACCESSORIES
ANT/CABLE
IN
M4 x 20 mm screws
M4 x 20 mm screws
PP
L R
HDMI3HDMI2
USB COMPONENT IN
AV IN
- AUDIO -
ANT/CABLE
IN
/
DIGITAL
OUTPUT
(Optical)
AUDIO OUT
HDMI1/ARC
VOL
CH
CH
VOL
MENU
HDMI2 HDMI3
HDMI1/ARC

On your TV’s Audio menu, highlight Digital Audio Format / Audio
Delay, then press ENTER. Set the Audio Format option to PCM.
ONEYEAR LIMITED WARRANTY
Visit www.insigniaproducts.com for details.
NEED ADDITIONAL HELP?
See your online User Guide! This
comprehensive guide includes everything
from basic how-to steps to more advanced
features. A copy of your User Guide is not
provided in the box but is available online.
Go to www.insigniaproducts.com, then
click Support & Service. Enter
NS-50D421NA16 in the box under
Manual, Firmware, Drivers & Product
Information, then click
► .
Check out our Support Community
http://community.insigniaproducts.com/
for helpful information from other Insignia
TV owners.
WE’RE HERE FOR YOU
www.insigniaproducts.com
For customer service, call:
877-467-4289 (U.S./Canada )
INSIGNIA is a trademark of Best Buy and its
affiliated companies.
Registered in some countries.
Distributed by Best Buy Purchasing, LLC
©2015 Best Buy. All rights reserved.
Made in China
3CONNECTING AUDIO DEVICES
How do I connect my TV to external speakers?
USING YOUR REMOTE CONTROL
I already have a universal remote control. How do I make it control this TV?
4TURNING ON MY TV
When can I turn on my TV?
USING DIGITAL AUDIO
USING ANALOG AUDIO
Note: See the instructions that
came with your speakers or soundbar
for more information.
WHEN YOUR TV IS IN PLACE:
1Plug one end of the power cord into the power connector on the back of your TV
and the other end into a power outlet.
2Remove the remote control cover and install the batteries.
3Press (power) on your remote control.
4Follow the on-screen instructions.
For an up-to-date list of codes for other cable
providers and universal remote brands,
scan this QR code or visit
www.insigniaproducts.com/remotecodes
English V4 15-0648
AAA
+
AAA
+
What are my screen-size options?
Cablevision
Charter
507, 523, 567, 577, 586
Comcast
Cox
Direct TV
Dish Network
Time Warner
Tivo
Verizon
068, 069, 078, 096, 100, 164, 168, 229, 026
2002, 1204, 1423, 1517, 0171, 1963, 0463, 1463, 0842, 1326, 167, 415, 424,
450, 456, 461,
10171, 11204, 11326, 11463, 11517, 11641, 11780, 11785, 11892, 11963, 12002
1326, 1463
10171, 11204, 11326, 11517, 11564, 11641, 11963, 12002
720
400, 450, 461, 456, 10463, 1463, 0463
0091
0198, 0490
One for All
Philips
RCA
Sony
0054
0198, 0490
135
068, 069, 078, 096, 100, 164, 168, 229, 026
UNIVERSAL REMOTE TV CODES
UNIVERSAL REMOTE CONTROLS
If you already have a universal remote control that you would like to program to work with your TV and don’t want to use the included Insignia remote control, see the
table below for common codes.
Picture
MOVE PREVIOUS EXIT
EXIT
SELECT
OK
ENTER
MENU
Picture Mode
Advanced Settings
Backlight
Brightness
Contrast
Color
Energy Savings
37
50
52
55
INPUT SOURCE
TV
HDMI1
HDMI2
HDMI3
Component/AV
USB(Photos)
DIGI
DIGIT
AL
AL
(
OPTI
OPTIC
AL)
AL)
OUTPUT
OUTPUT
NORMAL: Original aspect ratio is
preserved. You might see black bars if the
original content is not widescreen (16:9).
ZOOM: Expands the image to fill the
screen. The top and bottom of the image
may be cropped.
WIDE: Use to watch content that was
recorded in widescreen (16:9).
CINEMA: Stretches the image at the
edges, but keeps a clear image in the
center.
AUTO: Automatically adjusts the image
based on the screen size and the TV
program. Select this option if you don't
know which aspect ratio to choose.
Note: Auto is only available when Aspect
Ratio in the Channels menu is set
to On.
CABLE BOX, SATELLITE BOX, OR OTHER SET-TOP BOX
Game
Adjusts the picture for the ultimate gaming
experience.
INPUT
Opens the Input Source list.
Power
Turns your TV on or off.
Numbers
Enter channel numbers.
MENU
Opens the TV menu.
ENTER
Confirms selections or changes.
EXIT
Closes the TV menu.
ASPECT
Changes how the picture is
displayed on the screen.
Volume
Changes the volume.
FAVORITE
Opens the Favorite Channel List.
SLEEP
Sets the sleep timer.
Arrows
Navigate in TV menus.
INFO*
Opens a TV status banner.
CCD
Turns closed captioning on or off.
MUTE
Mutes the sound.
PICTURE
Selects the picture mode.
AUDIO
Selects the audio mode.
Enters a digital sub-channel number
(for example 4.1).
Channel
Changes the TV channels.
Recall
Returns to the previous channel.
Home
Opens the TV menu.
Media Controls
USB – Control the photo slideshow.
INlink – Control HDMI-CEC
devices connected to your TV.
Easy Setup • Choose your Menu Language
English
Français
Español
SETTINGSPICTURE AUDIO CHANNELS HELP
SOUNDBAR
AUDIO IN
OPTICAL
AUDIO IN
MOVE PREVIOUS EXIT
EXIT
SELECT
OK
ENTER
MENU
Audio
SETTINGSPICTURE AUDIO CHANNELS HELP
• Digital Audio Format / Audio Delay
Audio Format
Audio Delay
Passes through digital audio sound format.
Pass Thru
PCM
Audio • Digital Audio Format / Audio Delay
Audio Format
Audio Delay 
Pass

PCM
OR
/
AUDIO OUT
DIGITAL
OUTPUT
(Optical)