Insignia NS-42D240A13 User manual

M4 x 10mm
M4 x 16mm
Note: Connect your Yellow
video cable to the Green Y/Video jack.
Using an AV cable (good)
Connecting an antenna/cable wall jack
Connect a coaxial cable to the TV IN ANT/CABLE jack of your TV and to the
antenna/cable wall jack.
Connecting a home theater system
Using digital audio
Using analog audio
Connecting power
Plug the power cord into a power outlet.
42” 1080p LED TV
QUICK SETUP GUIDE
NS-42D240A13
Thank You
for purchasing this ne Insignia television.
We hope you enjoy the quality and reliability
of this product for years to come.
_______________________________
Front features
Installing the stand
1 Carefully place your TV screen face-down on a cushioned, clean surface to
protect the screen from damages and scratches.
2 Secure the stand column to the screen using the four short screws (provided).
3 Secure the base to the stand column using the ve long screws (provided).
Installing a wall-mount bracket
1 Carefully place your TV screen face-down on a cushioned, clean surface to
protect the screen from damages and scratches.
2 Attach the wall-mount bracket to your TV using the mounting holes on the back
of your TV. See the instructions that came with the wall-mount bracket for
information about how to correctly hang your TV.
Identifying cables
Your TV has several connection types for connecting devices. For the best video quality,
connect a device to the best available connection.
You can use the HDMI 1/DVI jack to connect a DVI device to your TV. You need to attach an
HDMI-to-DVI adapter to the end of the HDMI cable that connects to the DVI device’s jack.
Connection type Video qualityCable connector
HDMI video/audio Best
Component video
and analog audio
Better
Good
OR
Composite video
and analog audio
OR
WE ARE GOING GREEN!
A copy of your User Guide is not provided in
the box but is available online.
Go to www.insigniaproducts.com, click
Support & Service, enter your model
number in the Product Search eld,
then click Search.
This apparatus is intended to be supported by a UL Listed wall mount bracket.
Warning
Note: Cables are not provided.
Note: Cable is not provided.
Note: Cable is not provided.
Connecting a DVD or Blu-ray player, cable box,
satellite receiver, camcorder, or game station
Using an HDMI cable (best)
Using component cables (better)
Power
indicator
Remote
control sensor
AUDIO/VIDEO
OUT
Note: Cable is not provided.
Remote control and
2 AAA batteries
TV
VIDEO HDMI ACC
ENTER
CH-LIS T FAVORIT E
DCCTUPNI
+MUTE
CHVOL
SLE EP ZOO M
MTS/SAP PICTURE
E
X
I
T
M
E
N
U
H
O
M
E
I
N
F
O
*
AUDIO
1 2 3
4 5 6
7 8 9
0
M4 screws (10 mm length) (4)
Stand column
TV base
M4 screws (16 mm length) (5)
AUDIO/VIDEO
OUT
CABLE

Using an AV cable (good)
Connecting an antenna/cable wall jack
Connect a coaxial cable to the TV IN ANT/CABLE jack of your TV and to the
antenna/cable wall jack.
Connecting a home theater system
Using digital audio
Using analog audio
Connecting power
Plug the power cord into a power outlet.
One-year limited warranty
Visit www.insigniaproducts.com for details.
Need additional help?
See your Online User Guide! This
comprehensive guide includes everything from
basic how-to steps to more advanced features.
A copy of your User Guide is not provided in
the box but is available online. Go to
www.insigniaproducts.com, click Support
& Service, enter your model number in the
Product Search eld, then click Search.
Check out our online community forum at
www.insigniaproducts.com for helpful
information from other Insignia TV owners.
We’re here for you
www.insigniaproducts.com
For customer service, call:
877-467-4289 (U.S./Canada markets)
Distributed by Best Buy Purchasing, LLC
7601 Penn Avenue South, Richeld, MN USA
55423-3645
© 2012 BBY Solutions, Inc.
All rights reserved. INSIGNIA is a trademark of BBY Solutions,
Inc. Registered in some countries. All other products and
brand names are trademarks of their respective owners.
ENGLISH 12-0533
Setting up remote control
1Press the release button on the back of the remote control to
remove the battery compartment cover.
2Insert two AAA batteries into the battery compartment. Make sure that
the + and – symbols on the batteries match the + and – symbols in
the battery compartment.
3Replace the cover.
Front features
Installing the stand
1 Carefully place your TV screen face-down on a cushioned, clean surface to
protect the screen from damages and scratches.
2 Secure the stand column to the screen using the four short screws (provided).
3 Secure the base to the stand column using the ve long screws (provided).
Installing a wall-mount bracket
1 Carefully place your TV screen face-down on a cushioned, clean surface to
protect the screen from damages and scratches.
2 Attach the wall-mount bracket to your TV using the mounting holes on the back
of your TV. See the instructions that came with the wall-mount bracket for
information about how to correctly hang your TV.
42” 1080p LED TV IQUICK SETUP GUIDE I NS-42D240A13
Normal:
Displays the original 4:3 aspect ratio with vertical black bars on the left
and right hand side of the screen.
Zoom:
Expands the image to ll the screen. The top and bottom of the
image may be cropped.
Wide:
Use this option to view content recorded in a 16:9 (wide-screen) aspect ratio.
Cinema:
Stretches the image at the edges, but keeps a clear image in the center.
Auto:
Automatically adjusts the image based on the screen size and the TV
program. Note: Auto is only available when Auto Zoom in the
CHANNELS menu is set to On.
Aspect ratio options
RECALL
Returns to the previous channel.
Arrows
Navigate in on-screen menus.
HOME
Opens the on-screen menu.
INFO
Opens a TV status banner.
CCD
Turns closed captioning on or o.
FAVORITE
Opens the Favorite Channel List.
MUTE
Mutes the sound.
Channel
Changes the TV channels.
PICTURE
Selects the video mode.
MTS/SAP
Cycles through mono, stereo, and
secondary audio for analog programs.
AUDIO
Selects the audio mode.
Power
Turns your TV on or o.
Quick Launch Inputs
Selects another source
connected to your TV.
Numbers
Enter channel numbers.
.
Enter a digital sub-channel
number (e.g. 4.1).
ENTER
Conrms selections or
changes.
MENU
Opens the on-screen menu.
EXIT
Closes the on-screen menu.
INPUT
Opens the Source List.
CH-LIST
Opens the channel list.
Volume
Changes the volume.
SLEEP
Sets the sleep timer.
ZOOM
Changes how the picture
displays on the screen.
INlink Controls
Controls HDMI-CEC devices
connected to your TV.
INPUT SOURCE
TV
Component
HDMI1
HDMI2
HDMI3
VGA
USB(Photos)
Move
Adjust settings to affect picture quality
Select Previou Exit
MENU EXIT
OK
ENTER
PICTURE AUDIOCHANNEL SETTING PHOTO
PICTURE
Picture Mode
Brightness
Contrast
Color
Advanced Video
Reset Picture Settings
Energy Savings
47
62
69
WE ARE GOING GREEN!
A copy of your User Guide is not provided in
the box but is available online.
Go to www.insigniaproducts.com, click
Support & Service, enter your model
number in the Product Search eld,
then click Search.
Note: Cable is not provided.
Note: Cable is not provided.
Picture Channels Settings PhotosAudio
Universal remote TV codes
Universal remote controls Cable/Satellite/Set-top boxes
One for All Philips RCA Sony Cablevision Charter Comcast Cox Direct TV Dish Network Time Warner Tivo Verizon
0054 0198,
0490 135
1326,
1463
0198,
0490
400, 450, 461, 456,
10463, 1463, 0463
0091
068, 069, 078,
096, 100, 164,
168, 229, 026
2002, 1204, 1423, 1517,
0171, 1963, 0463, 1463,
0842, 1326, 167, 415,
424, 450, 456, 461, 507,
523, 567, 577, 586
10171, 11204,
11326, 11517,
11564, 11641,
11963, 12002
720
068, 069,
078, 096,
100, 164,
168, 229,
026
10171, 11204, 11326,
11463, 11517, 11641,
11780, 11785, 11892,
11963, 12002
Programming your remote control
To program your universal remote control to work with your new Insignia TV, see the table for common codes. If you have problems programming your remote or
need a dierent remote control code, visit www.insigniaproducts.com for the latest remote control code information.
Turning on your TV for the rst time
1Connect your TV’s power cord to a power outlet, then press (power). The Choose Your
Menu Language screen opens.
2Press up or down to highlight a language, then press ENTER. The Choose Your Time
Setting screen opens.
3Press ◄or ►to select Auto or Manual, then press ENTER. If you select Auto, the date
and time are set automatically from a digital TV signal. If you select Manual, you can
manually set the date and time. Press ENTER.
4Press ▲or ▼to highlight Home Mode or Retail Mode, then press ENTER. If you
select Retail Mode, a message asks you to conrm your selection. Select Ye s or No.
Retail mode is not an energy-saving mode.
5Press ▲or ▼to highlight Antenna, Cable, or Satellite Box, then press ENTER.
A. If you select Antenna, your TV scans for available channels. The scan may take
several minutes.
B. If you select Cable, a message asks if you have a cable box.
• Select No if no cable box is connected. Your TV scans for available channels.
The scan may take several minutes.
• Select Ye s if a cable box is connected. A message asks how you connected
the cable box to your TV:
• Select AV, Component, or HDMI if you connected a cable box to your TV
using one of these cables. Read the message, then press ENTER to close the wizard.
• Select Coaxial if you connected a cable box to your TV using a coaxial cable.
Read the message, then press ENTER to start the channel scan (VHF channels only).
C. If you select Satellite Box, a message asks how you connected the satellite
box to your TV:
• Select AV, Component, or HDMI if you connected a satellite box to your TV
using one of these cables. Read the message, then press ENTER to close the wizard.
• Select Coaxial if you connected a satellite box to your TV using a coaxial cable.
Read the message, then press ENTER to start the channel scan (VHF channels only).
Move
OK
E NT E R
ME NU E XI T
Exit
Previous
Se lec t
Choose Your Time Setting
Mode Auto
Time Zone Atlantic
Daylight Savings On
Year 2012
Month October
Day 28
Time 08:07 AM
If automatic, options are automatically set by TV source
Analog Channels
Digital Channels
Scanning for Channels
0
Move
OK
E NT E R
ME NU E XI T
Exit
Previous
Se lec t
0
Channel scan may take 20+ minutes
Channel scan may take 20+ minutes
5or63or
4
English
Choose Your Menu Language
Move
OK
E NT E R
ME NU E XI T
Exit
Previous
Se lec t
Set menu language to English, or
Fran ais
ç
Español
Move
OK
E NT E R
ME NU E XI T
Exit
Previous
Se lec t
Choose Your Picture Mode
Reduces total power consumption
Home Mode
Retail Mode
Fran aisçEspa ñol
2
Choose Your TV Source
Antenna
Cable
Satellite Box
Move
OK
E NT E R
ME NU E XI T
Exit
Previous
Se lec t
Select if using an antenna for standard or HD TV
5A
Choose Your TV Source
Antenna
Cable
Satellite Box
Move
OK
E NT E R
ME NU E XI T
Exit
Previous
Se lec t
Select if you have cable service.
Do you have a Cable Box?
No
Yes
Move
OK
E NT E R
ME NU E XI T
Exit
Previous
Se lec t
How did you connect the
AV, Component, or HDMI
Coaxial
Move
OK
E NT E R
ME NU E XI T
Exit
Previous
Se lec t
cable box to the TV?
Choose Your TV Source
Antenna
Cable
Satellite Box
Move
OK
E NT E R
ME NU E XI T
Exit
Previous
Se lec t
Select if you have a satellite box.
How did you connect the
AV, Component, or HDMI
Coaxial
Move
OK
E NT E R
ME NU E XI T
Exit
Previous
Se lec t
satellite box to the TV?
5B
5C
Connecting a DVD or Blu-ray player, cable box,
satellite receiver, camcorder, or game station
Using an HDMI cable (best)
Using component cables (better)
4
3
AV
MENU INPUT POWERVOL CH
Antenna or
cable TV
(no box)
Blu-ray player/DVD player/VCR Cable or satellite TV box
AV receiver
Game console
or camera
USB ash drive
Computer
Connecting a home theater system with multiple devices
We recommend that you connect
the AV receiver’s HDMI OUT jack
to one of your TV's HDMI jacks.
Then connect the AV receiver's
DIGITAL AUDIO INPUT jack to your
TV's DIGITAL OUTPUT jack to route
Dolby Digital audio.
AUDIO IN
OPTICAL
AUDIO IN