Insignia NS-PLTPSP13 User manual

Quick Setup Guide
USB Flat Panel Speakers NS-PLTPSP13
Congratulations on your purchase of a
high-quality Insignia product. This
two-piece system is designed to deliver
superior audio performance to laptops,
netbooks, and home computers.
Package contents
• Speakers (2)
• Travel pouch
• USB power/audio cable
• Quick Setup Guide
Caution
• Read all safety and operating instructions
before using these speakers.
• Keep speakers out of extreme heat, and away
from sources producing extreme heat, such as
space heaters, radiators, stoves, and other
devices emitting heat.
• Keep speakers out of the rain and humid
conditions to avoid electric shock. Keep
speakers away from devices containing water,
such as sinks and bathtubs.
• Use a dry cloth for cleaning. Do not wipe any
part of the system with cleaning solvents, such
as furniture wax, bleach, benzene, or ammonia.
Speaker placement
• Place the speakers on opposite sides of the
sound source, as far apart as possible. When
connected to the speakers, the cables become
the speaker stands.

Front view
Speaker connection
1Connect the 3.5 mm cable plug to the headphone jack or external speaker jack of
your sound source (laptop, smartphone, iPod, MP3 player, or computer).
2Connect the USB connector to a USB port on your laptop, computer, or USB wall
charger with a female USB type A connector (a wall charger is not included).
3Connect the other ends of the cables (the ends with the matching molded plug
casings) to the speakers.
4Turn on your sound source.
5Use your sound source (i.e. computer, MP3 player) to adjust the volume and other
audio settings.
Storing your speakers
• Speakers click together magnetically
Laptop or
Netbook
iPodSmartphone MP3 Computer
Laptop or
Netbook
USB wall
charger
Computer
Audio Signal:
Connect to the headphone jack
or external speaker jack
Speaker Power:
Connect to USB port
NS-PLTPSP13_12-0804_QSG_V1_EN.ai 1 8/30/2012 4:00:15 PMNS-PLTPSP13_12-0804_QSG_V1_EN.ai 1 8/30/2012 4:00:15 PM

ENGLISH 12-0804
Troubleshooting Specications
Visit www.insigniaproducts.com for details.
One-year limited warranty
Visit www.insigniaproducts.com for details.
Contact Insignia:
For customer service, call 1-877-467-4289
www.insigniaproducts.com
© 2012 BBY Solutions, Inc. All rights reserved. INSIGNIA is a trademark of BBY Solutions, Inc.
Registered in some countries. All other products and brand names are trademarks of their
respective owners.
Problem:
No power.
No sound.
Sound plays only out of one
speaker.
Poor sound quality.
Solution:
• Make sure that the computer or
netbook is turned on and the USB
connector is plugged in correctly.
• Make sure that the speakers are
getting power. Check above steps.
• Make sure that all cables are securely
plugged into the correct jacks; the
speaker jack is used for the audio
source and the USB jack is for speaker
power only. The USB jack will not
provide the sound signal.
• Make sure that the speakers are
connected to the audio/line output
jack from your computer sound card.
This jack is usually green.
• Make sure that your sound source is
playing and the volume is turned up
and not muted.
• Try connecting the speakers to a
dierent sound source to verify if the
issue is with the speakers or the sound
source.
• Make sure the cables are not broken or
damaged.
• Adjust the volume balance setting on
the sound source until it is centered.
• Make sure the connectors are inserted
fully at the sound source and at the
speakers themselves.
• Make sure that all cables are securely
plugged into the correct jacks.
• Make sure the cables are not broken or
damaged.
• Adjust the audio settings on the sound
source (i.e. computer, MP3 player,
smartphone).
NS-PLTPSP13_12-0804_QSG_V1_EN.ai 2 8/30/2012 4:00:15 PMNS-PLTPSP13_12-0804_QSG_V1_EN.ai 2 8/30/2012 4:00:15 PM