Insignia NS-SPBTP1-W User manual

Before using your new product, please read these instructions to prevent any damage.
USER GUIDE
Bluetooth Plug-in
Wall Speaker
NS-SPBTP1-W

2
NS-SPBTP1-W Bluetooth Plug-in Wall Speaker
www.insigniaproducts.com
NS-SPBTP1-W
Bluetooth Plug-in Wall Speaker
Contents
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Safety information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Setting up your Bluetooth speaker. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Using your Bluetooth speaker . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Charging an external device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
Maintaining. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Legal notices. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
ONE-YEAR LIMITED WARRANTY - INSIGNIA . . . . . . . . . . . . . . . . . . . . . . .13
Introduction
Congratulations on your purchase of a high-quality Insignia product. Your
NS-SPBTP1-W represents the state-of-the-art in Bluetooth plug-in speaker
design and is designed for reliable and trouble-free performance.
Safety information
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
This symbol indicates that dangerous voltage constituting a risk
of electric shock is present within your speaker. This label is
located on the back of your speaker.
This symbol indicates that there are important operating and
maintenance instructions in the literature accompanying your
speaker.

3
NS-SPBTP1-W Bluetooth Plug-in Wall Speaker
www.insigniaproducts.com
Important safety instructions
1Read these instructions.
2Keep these instructions.
3Heed all warnings.
4Follow all instructions.
5Do not use this apparatus near water.
6Clean only with a dry cloth.
7Do not block any ventilation openings. Install in accordance with the
manufacturer's instructions.
8Do not install near any heat sources such as radiators, heat registers,
stoves, or other apparatus (including amplifiers) that produce heat.
9Do not defeat the safety purpose of the polarized or grounding-type
plug. A polarized plug has two blades with one wider than the other. A
grounding type plug has two blades and a third grounding prong. The
wide blade or the third prong are provided for your safety. If the
provided plug does not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
10 Protect the power cord from being walked on or pinched particularly
at plugs, convenience receptacles, and the point where they exit from
the apparatus.
11 Only use attachments/accessories specified by the manufacturer.
12 Use only with the cart, stand, tripod, bracket or table specified by the
manufacturer, or sold with the apparatus. When a cart is used, use
caution when moving the cart/apparatus combination to avoid injury
from tip-over.
Portable cart warning (symbol provided by RETAC)
13 Unplug this apparatus during lightning storms or when unused for
long periods of time.
14 Refer all servicing to qualified service personnel. Servicing is required
when the apparatus has been damaged in any way, such as
power-supply cord or plug is damaged, liquid has been spilled or
objects have fallen into the apparatus, the apparatus has been
exposed to rain or moisture, does not operate normally, or has been
dropped.
15 To reduce the risk of fire or electric shock, do not expose this device to
rain, moisture, dripping, or splashing, and no objects filled with liquids,
such as vases, shall be placed on it.

4
NS-SPBTP1-W Bluetooth Plug-in Wall Speaker
www.insigniaproducts.com
16 The wall plug is the disconnecting device. The plug must remain
readily operable.
17 The batteries (battery pack & batteries installed) shall not be exposed
to excessive heat such as sunshine, fire or the like.
18 Do not place any naked flame sources, such as lighted candles, on the
apparatus.
19 The battery used in this product must be properly recycled or
disposed of. Please contact your local recycling center for proper
battery handling and disposal instructions.

5
NS-SPBTP1-W Bluetooth Plug-in Wall Speaker
www.insigniaproducts.com
Features
• Bluetooth connectability
• Built-in power adapter
• Built-in rechargeable battery
Package contents
• Bluetooth plug-in speaker
•QuickSetupGuide
#Item Description
1 / (power/pair)
button
• Press and hold for three seconds to turn this system on.
• Press and hold for two seconds to put this system into pairing mode.
• Press and release to turn this system off.
2 Volume+/– buttons Press to increase or decrease the volume level of playback.
3 Battery/pairing indicator • Indicates the battery charging status.
• Indicates the pairing states.
4 AC power plugs (foldable) Fold down, then plug into a wall outlet to charge your speaker.
5AUX IN jack Plug an external audio device into this jack to hear the playback from this speaker.
6 USB charge port Connect an external device to this port to charge it.

6
NS-SPBTP1-W Bluetooth Plug-in Wall Speaker
www.insigniaproducts.com
Setting up your Bluetooth speaker
Your plug-in wall speaker is typically used while plugged into a wall
socket. You can also use the speaker unplugged, with the built-in
rechargeable battery.
Charging the battery
Your speaker has a built-in rechargeable battery, which must be charged
to use the speaker.
• Fold down the AC power plug from the speaker body and plug it into
an AC wall outlet.
• The battery/pairing indicator turns red when the battery is charging
and turns off when the battery is fully charged.

7
NS-SPBTP1-W Bluetooth Plug-in Wall Speaker
www.insigniaproducts.com
Using your Bluetooth speaker
Turning on and pairing your speaker
1Press and hold the / (power/pair) button for three seconds to
turn on your speaker.
2Press and hold the / (power/pair) button for two seconds to
enter pairing mode. The pair indicator light flashes blue rapidly.
3Open the Bluetooth settings on your Bluetooth-enabled device. After
the speaker is recognized, “NS-SPBTP1” appears in the list of Bluetooth
devices.
4Select “NS-SPBTP1” to pair with your device. The pair indicator light
turns solid blue when your speaker is successfully connected. You can
use your paired device to control playback.
Controlling the volume
• You can change the playback volume by either pressing the
VOLUME+ or – buttons on the top of your speaker, or changing the
volume on your paired device. For maximum volume, turn both to
maximum.
Notes
• On most devices no password is needed to pair, however,
if a password is requested, the default password is 0000.
• Before playing back via Bluetooth, make sure that the
audio cable has been removed from the AUX IN jack of
your speaker.

8
NS-SPBTP1-W Bluetooth Plug-in Wall Speaker
www.insigniaproducts.com
Connecting two Bluetooth devices simultaneously
1Press and hold the / (power/pair) button for two seconds to
disconnect the current Bluetooth connection and enter pairing mode,
then follow steps 3 and 4 in “Turning on and pairing your speaker” on
page 7, to establish a Bluetooth connection with another device.
2On the initial Bluetooth device, select NS-SPBTP1 from the list of
available Bluetooth devices to resume the connection. Now, both
Bluetooth devices are simultaneously connected to this speaker.
3Start playback on one of the paired devices to streaming music to this
system. If you want to play from the other paired device, pause the
current playback and start playback on the other paired device.
Playing music from a non-Bluetooth external sound source
1Connect a non-Bluetooth external sound source, such as an MP3
player, by plugging an audio cable with a 3.5 mm plug (not included)
into the AUX IN jack on the right side of your speaker.
2Start playback on the external device.
3Press VOLUME + or –to adjust the volume.
4Control playback using the controls on the external device.
Note
• If the connected external device is playing music at a
normal volume level, your speaker plays from that
source. If the connected external device has no sound or
the volume level is too low, your speaker continues
Bluetooth playback.
• When playing music via audio cable, it is suggested that
you pause the Bluetooth sound source paired to your
speaker or disconnect the Bluetooth device.

9
NS-SPBTP1-W Bluetooth Plug-in Wall Speaker
www.insigniaproducts.com
Charging an external device
You can charge an external device with a USB cable when your speaker is
plugged into an AC wall outlet.
• To charge your external device, plug a USB cable from the device (such
as a mobile phone, tablet, or wireless headset) into the USB port on the
side of your speaker.
Troubleshooting
Notes
• Your speaker must be plugged into an AC wall outlet to
be able to charge an external device.
• The maximum output current of the USB port is 1000mA
when the system is idle. The output current is 500mA
when this system is playing music.
Problem Solution
My speaker won’t turn on. • Make sure that the battery is charged or your speaker is plugged into an AC wall
outlet.
The built-in battery won’t
charge.
• Make sure that the speaker is not exposed to excessive heat (above 140°F [60°C]). Try
charging the battery again when the temperature returns to normal.
No sound. • Make sure that the battery is charged and your speaker is turned on.
• Make sure that your external device, if connected, is turned on and playing.
• Make sure that the volume on your external device is turned up and is not set to mute.
• Make sure that the volume is not extremely low.
My external device won’t
play.
• Make sure that the battery is charged and your speaker is turned on.
• Make sure that the external device is not paused or muted.
• Make sure that there are songs on your external device.

10
NS-SPBTP1-W Bluetooth Plug-in Wall Speaker
www.insigniaproducts.com
Maintaining
• To prevent fire or shock hazard, disconnect your speaker from the AC
wall outlet when cleaning.
• The finish on your speaker may be cleaned with a dust cloth and cared
for as other furniture. Use caution when cleaning and wiping the plastic
parts.
• If the speaker becomes dirty or smudged with fingerprints it may be
cleaned with a soft cloth slightly dampened with a mild soap and water
solution. Never use abrasive cloths or polishes as these will damage the
finish of your speaker.
Specifications
My external audio device
(MP3 player) won't play.
• Make sure that your external device is on and charged.
• Make sure that your external device is not paused or muted.
• Make sure that the audio cable is fully inserted into the external device and the AUX
IN jack on your speaker.
• Make sure that there are songs in your external device.
• Make sure that your external device is working properly before you connect it to your
speaker.
Caution
• Never allow water or other liquids to get inside your
speaker.
• Modifying or tampering with the internal components of
your speaker can cause a malfunction and might
invalidate its warranty. If your speaker is not performing
as it should, take it to the local dealer for assistance.
General
Bluetooth 3.0 + EDR, support A2DP, SBC
Power requirement Built-in battery
Power supply AC 120V~60Hz (built-in 300 mAh Li-ion rechargeable battery)
Battery Built-in 300 mAh Li-ion rechargeable battery to support music playback > 2.5 hours.
Audio output power Typical 3 W
USB port Supports 5 V at 1 A charging current (no audio playback)
Dimensions (HxWxD) 3.7 × 3.7 × 1.4 in (9.5 × 9.5 × 3.5 cm)
Problem Solution