Insignia NS-SPBTP1-W User manual

Quick Setup Guide |NS-SPBTP1-W
Bluetooth Plug-In Wall Speaker
Congratulations on your purchase of a high-quality Insignia product.
Your Insignia NS-SPBTP1-W Bluetooth plug-in wall speaker represents
the state-of-the-art in speaker and Bluetooth design and is designed
for reliable and trouble-free performance.
PACKAGE CONTENTS
• Bluetooth plug-in wall speaker
• Quick Setup Guide
CHARGING THE BATTERY
• This system has a built-in rechargeable battery. To charge, fold down the
AC power plug as shown below, then gently insert it into a wall outlet.
• The battery indicator
indicates the charging state.
USING YOUR BLUETOOTH SPEAKER
1Press and hold the / (power/pair) button for three seconds to
turn on your speaker.
2Press and hold the / (power/pair) button for two seconds to
enter pairing mode. The pair indicator light ashes blue rapidly.
3Open the Bluetooth settings on your Bluetooth-enabled device. After
this system is recognized, NS-SPBTP1 appears in the list of Bluetooth
devices.
4Select NS-SPBTP1 to pair with your device. The pair indicator light
turns solid after this system is successfully connected. You can use
your paired device to control playback.
Notes:
• On most devices, no password is needed to pair, however, if a password is
requested, the default password is 0000.
• Before playing back using Bluetooth, make sure that the audio cable has been
removed from the AUX IN jack of this system.
• You can change the playback volume by either pressing the VOLUME+ or –
buttons on the top of your speaker, or changing the volume on your paired
device. For maximum volume, turn both to maximum.
Before using your new product, please read these instructions to prevent any damage.
CONNECTING TWO BLUETOOTH DEVICES
1Press and hold the / (power/pair) button for two seconds to
disconnect the current Bluetooth connection and enter pairing mode,
then follow steps 3 and 4 above to establish a Bluetooth connection
with another device.
2 On the initial Bluetooth device, select NS-SPBTP1 in the list of available
Bluetooth devices to resume the connection. Now, both of the two
Bluetooth devices are simultaneously connected to this speaker.
3Start playback of one paired device to stream music to this system. If
you want to play from the other paired device, pause the current
playback and start playback on the other paired device.
PLAYBACK USING AUX IN
• Connect a 3.5 mm cable into your audio device and the AUX IN jack on
your speaker. The audio defaults to your audio device when it is playing
and the volume is turned up. If your audio device isn’t playing sound,
the speaker defaults back to any Bluetooth device that it is paired to.
Note: When playing music via audio cable, it is suggested that you pause the
Bluetooth sound source paired to your speaker or disconnect the Bluetooth device.
# ITEM
1 / (Power/Pair)
button
2 Volume+/– buttons
3 Battery/pairing indicator
4 AC power plugs (foldable)
5 AUX IN jack
6 USB charge port
DESCRIPTION
• Press and hold for three seconds to turn this system on. Press and
release to turn it o.
• Press and hold for two seconds to put this system into pairing mode.
Press to increase or decrease the volume level of playback.
• Indicates the battery charging status.
• Indicates the pairing states.
Fold down, then plug into a wall outlet to charge your speaker.
Plug an external audio device into this jack to hear the playback
from this speaker.
Connect an external device to this port to charge it.
90°
Right view
Wall outlet
MODE
Standby
Power on (not connected)
Bluetooth mode
AUX IN mode
CHARGING
Solid red
Lights alternately red and purple
Solid purple
Lights alternately red and purple
FULLY CHARGED
O
Blinking blue
Solid blue
Blinking blue
FIND YOUR USER GUIDE ONLINE!
We are going green so a copy of your User Guide
is not provided in the box but is available online.
Go to www.insigniaproducts.com, then click
Support & Service.
Enter your model number in the box under
Manual, Firmware, Drivers & Product
Information, then click ►.
Top view
FEATURES
• Bluetooth connectability
• Built-in power adapter
• Built-in rechargeable battery
CHARGING AN EXTERNAL DEVICE
• Use the USB charge port to charge external devices, including most
mobile phones, tablets, and wireless headsets. You can use the power
cable that came with the device. Charging is available when this system
is connected to a wall outlet.
Note: The maximum output current of the USB port is 1000mA when the system is
idle. The output current is 500mA when this system is playing music.
TROUBLESHOOTING
For troubleshooting information, see your online User Guide at
www.insigniaproducts.com.
SPECIFICATIONS
• Dimensions (H×W×D): 3.7 × 3.7 × 1.4 in (9.5 × 9.5 × 3.5 cm)
For additional specication information, see your online User Guide at
www.insigniaproducts.com.
ONEYEAR LIMITED WARRANTY
Visit www.insigniaproducts.com for details.
CONTACT INSIGNIA:
For customer service, call 1-877-467-4289 (U.S. and Canada) or 01-800-926-3000
(Mexico)
www.insigniaproducts.com
INSIGNIA is a trademark of Best Buy and its affiliated companies. Registered in some countries. Distributed by
Best Buy Purchasing, LLC, 7601 Penn Ave South, Richeld, MN 55423 U.S.A. ©2014 Best Buy. All rights reserved.
Made in China
NS-SPBTP1-W_14-0888_QSG_V1_final.pdf 1 9/1/2014 10:17:46 AM

Right view
To audio output such
as CD/MP3/digital
music player.
Right view
To external USB devices,
such as mobile phones,
tablets, smartphones.
V1 ENGLISH 14-0888
Congratulations on your purchase of a high-quality Insignia product.
Your Insignia NS-SPBTP1-W Bluetooth plug-in wall speaker represents
the state-of-the-art in speaker and Bluetooth design and is designed
for reliable and trouble-free performance.
PACKAGE CONTENTS
• Bluetooth plug-in wall speaker
• Quick Setup Guide
CHARGING THE BATTERY
• This system has a built-in rechargeable battery. To charge, fold down the
AC power plug as shown below, then gently insert it into a wall outlet.
• The battery indicator
indicates the charging state.
USING YOUR BLUETOOTH SPEAKER
1Press and hold the / (power/pair) button for three seconds to
turn on your speaker.
2Press and hold the / (power/pair) button for two seconds to
enter pairing mode. The pair indicator light ashes blue rapidly.
3Open the Bluetooth settings on your Bluetooth-enabled device. After
this system is recognized, NS-SPBTP1 appears in the list of Bluetooth
devices.
4Select NS-SPBTP1 to pair with your device. The pair indicator light
turns solid after this system is successfully connected. You can use
your paired device to control playback.
Notes:
• On most devices, no password is needed to pair, however, if a password is
requested, the default password is 0000.
• Before playing back using Bluetooth, make sure that the audio cable has been
removed from the AUX IN jack of this system.
• You can change the playback volume by either pressing the VOLUME+ or –
buttons on the top of your speaker, or changing the volume on your paired
device. For maximum volume, turn both to maximum.
CONNECTING TWO BLUETOOTH DEVICES
1Press and hold the / (power/pair) button for two seconds to
disconnect the current Bluetooth connection and enter pairing mode,
then follow steps 3 and 4 above to establish a Bluetooth connection
with another device.
2 On the initial Bluetooth device, select NS-SPBTP1 in the list of available
Bluetooth devices to resume the connection. Now, both of the two
Bluetooth devices are simultaneously connected to this speaker.
3Start playback of one paired device to stream music to this system. If
you want to play from the other paired device, pause the current
playback and start playback on the other paired device.
PLAYBACK USING AUX IN
• Connect a 3.5 mm cable into your audio device and the AUX IN jack on
your speaker. The audio defaults to your audio device when it is playing
and the volume is turned up. If your audio device isn’t playing sound,
the speaker defaults back to any Bluetooth device that it is paired to.
Note: When playing music via audio cable, it is suggested that you pause the
Bluetooth sound source paired to your speaker or disconnect the Bluetooth device.
Top view
FEATURES
• Bluetooth connectability
• Built-in power adapter
• Built-in rechargeable battery
CHARGING AN EXTERNAL DEVICE
• Use the USB charge port to charge external devices, including most
mobile phones, tablets, and wireless headsets. You can use the power
cable that came with the device. Charging is available when this system
is connected to a wall outlet.
Note: The maximum output current of the USB port is 1000mA when the system is
idle. The output current is 500mA when this system is playing music.
TROUBLESHOOTING
For troubleshooting information, see your online User Guide at
www.insigniaproducts.com.
SPECIFICATIONS
• Dimensions (H×W×D): 3.7 × 3.7 × 1.4 in (9.5 × 9.5 × 3.5 cm)
For additional specication information, see your online User Guide at
www.insigniaproducts.com.
ONEYEAR LIMITED WARRANTY
Visit www.insigniaproducts.com for details.
CONTACT INSIGNIA:
For customer service, call 1-877-467-4289 (U.S. and Canada) or 01-800-926-3000
(Mexico)
www.insigniaproducts.com
INSIGNIA is a trademark of Best Buy and its affiliated companies. Registered in some countries. Distributed by
Best Buy Purchasing, LLC, 7601 Penn Ave South, Richeld, MN 55423 U.S.A. ©2014 Best Buy. All rights reserved.
Made in China
NS-SPBTP1-W_14-0888_QSG_V1_final.pdf 2 9/1/2014 10:17:47 AM