Inspired by drive OT 1000 User manual

limited 1 year
warranty
Your Drive branded product is warrantied to be
free of defects in materials and workmanship for 1
year from the date of purchase for the original
consumer purchaser.
This device was built to exacting standards and
carefully inspected prior to shipment. This Limited
1 Year Warranty is an expression of our confidence
in the materials and workmanship of our products
and our assurance to the consumer of years of
dependable service.
This warranty does not cover device failure due to
owner misuse or negligence, or normal wear and
tear. The warranty does not extend to non-durable
components, such as rubber accessories, casters,
and grips, which are subject to normal wear and need
periodic replacement.
If you have a question about your Drive device or this
warranty, please contact an authorized Drive dealer.
EU Authorized Representative
otter bath chair
OT 1000, OT 2000, OT 3000

recommended use
The Otter Bath Chair provides support during bathing
in the bathtub. The seat, back and legs are fully
adjustable. All adjustments are tool-free.
assembly
Your Otter Bath Chair comes in one carton
completely assembled. This carton contains: Bath
chair, head cushion strap, positioning and leg straps.
If your shipment is incomplete, please call a Inspired
by Drive authorized dealer.
Optional Accessories:
Tub Stand: Item # OT 8010
Shower Stand: Item # OT 8020
Soft Fabric Kit for OT 1000: Item # OT 1002
Soft Fabric Kit for OT 2000: Item # OT 2002
Soft Fabric Kit for OT 3000: Item # OT 3002
maintenance and care
1. Inspect the chair periodically for cracks,
breaks, loose or missing parts or malfunctions.
Check the fabric for tears or worn areas. If
a product needs service or replacement parts,
contact an authorized Inspired by Drive dealer.
2. Wash chair and fabric with soap and water
or 10% bleach. Do not use pine oil cleaners.
Fabric and straps may be removed and
machine-washed. Engage hook and loop
before washing. Fabric cover may be washed
on cool setting and drip-dried. Straps may be
washed in warm water and dried on cool
setting. Do not iron.
figure 1
1. Head cushion strap height can be adjusted
by opening strap in the back and positioning it
at desired height. Securely engage hook and
loop of strap once positioned. Slide head
cushions (A) along the strap to adjust width.
2. Straps (D) can be adjusted as needed by
inserting in any of the loops along the entire
unit.
3. To adjust legs (E), pull crossbar (F) outward,
rotate legs & push in to engage.
4. To adjust seat angle, pull on Uni-Bar under
the seat (Fig 2) rotate seat to desired position
and release Uni-Bar. To adjust back angle
using Uni-Bar behind the Otter back (Fig 3).
adjustments
See Figure 1
A
D
E
F
caution
Adult supervision is required at all times.
The straps and supports must be carefully
adjusted for the comfort and security of the child.
Child must be strapped in at all times.
figure 2
figure 3

limited 1 year
warranty
www.inspiredbydrive.comwww.inspiredbydrive.com
EU Authorized Representative
Drive Medical LTD
Ainley’s Industrial Estate
Elland, West Yorkshire,
United Kingdom HX5 9JP
otter bath chair with
soft fabric
OT 1000 SF, OT 2000 SF, OT 3000 SF
Rev.1.5.2.17
2017 Medical Depot, Inc. All rights reserved.
Drive DeVilbiss Healthcare
99 Seaview Boulevard
Port Washington N.Y. 11050 USA
Made in China
Your Drive branded product is warrantied to be
free of defects in materials and workmanship for 1
year from the date of purchase for the original
consumer purchaser.
This device was built to exacting standards and
carefully inspected prior to shipment. This Limited
1 Year Warranty is an expression of our confidence
in the materials and workmanship of our products
and our assurance to the consumer of years of
dependable service.
This warranty does not cover device failure due to
owner misuse or negligence, or normal wear and
tear. The warranty does not extend to non-durable
components, such as rubber accessories, casters,
and grips, which are subject to normal wear and need
periodic replacement.
If you have a question about your Drive device or this
warranty, please contact an authorized Drive dealer.

recommended use
The Otter Bath Chair provides support during bathing
in the bathtub. The seat, back and legs are fully
adjustable. All adjustments are tool-free.
assembly
Your Otter Bath Chair comes in one carton
completely assembled. This carton contains: Bath
chair, head cushion strap, positioning and leg straps.
If your shipment is incomplete, please call a Inspired
by Drive authorized dealer.
Optional Accessories:
Tub Stand: Item # OT 8010
Shower Stand: Item # OT 8020
maintenance and care
1. Inspect the chair periodically for cracks,
breaks, loose or missing parts or malfunctions.
Check the fabric for tears or worn areas. If
a product needs service or replacement parts,
contact an authorized Inspired by Drive dealer.
2. Wash chair and fabric with soap and water
or 10% bleach. Do not use pine oil cleaners.
Fabric and straps may be removed and
machine-washed. Engage hook and loop
before washing. Fabric cover may be washed
on cool setting and drip-dried. Straps may be
washed in warm water and dried on cool
setting. Do not iron.
figure 1
1. Head cushion strap height can be adjusted
by opening strap in the back and positioning it
at desired height. Securely engage hook and
loop of strap once positioned. Slide head
cushions (A) along the strap to adjust width.
2. Straps (D) can be adjusted as needed by
inserting in any of the loops along the entire
unit.
3. To adjust legs (E), pull crossbar (F) outward,
rotate legs & push in to engage.
4. To adjust seat angle, pull on Uni-Bar under
the seat (Fig 2) rotate seat to desired position
and release Uni-Bar. To adjust back angle
using Uni-Bar behind the Otter back (Fig 3).
adjustments
See Figure 1
A
D
E
F
caution
Adult supervision is required at all times.
The straps and supports must be carefully
adjusted for the comfort and security of the child.
Child must be strapped in at all times.
figure 2
figure 3