Insportline Joola TT-Buddy Pro User manual

USER MANUAL –EN
IN 21129 Robot for shooting ping pong balls Joola TT-
Buddy Pro

2
CONTENTS
ASSEMBLY ............................................................................................................................................. 3
OPERATION INSTRUCTIONS ............................................................................................................... 3
REMOTE CONTROL............................................................................................................................... 3
SPIN ADJUSTPENT................................................................................................................................ 3
PROJECTION DISTANCE...................................................................................................................... 3
TABLE POSITION/OSCILLATION.......................................................................................................... 3
ENVIRONMENT PROTECTION ............................................................................................................. 4
TERMS AND CONDITIONS OF WARRANTY, WARRANTY CLAIMS................................................... 4

3
ASSEMBLY
1. Remove contents from the box.
2. Line up the holes from the core engine to the bottom assembly, then twist to lock.
3. Line up the holes from the core engine to the top assembly, then twist to lock.
4. Attach the agitator to the core engine by lining up the hole on in the centre of the agitator with the
plastic rod on the top of the core engine. Push to lock.
5. Plug A/C adapter in at rear of core engine and plug into wall.
OPERATION INSTRUCTIONS
NOTE: TT BUDDY® should only be used with 40mm table tennis balls.
1. Before turning on the TT BUDDY®, make sure that there are no table tennis balls inside the core
engine. Rotate agitator so that the notch in the agitator is not lined up with ball entry hole. This will
reduce the possibility of jamming.
2. Place table tennis balls into top assembly.
3. Place TT BUDDY® at the opposite end of the table.
4. Set the remote control on your end of the table and turn the power button until the green light
illuminates.
5. Adjust each dial to your liking. Review the instructions below on how to customize the spin on the
ball.
REMOTE CONTROL
The TT BUDDY® comes with a wired remote control that helps you maximize the use of your TT
BUDDY®. Customize your TT BUDDY experience by using the remote to turn it on, adjust the
frequency, alter the spins, control the oscillation, and vary the projection distance. The frequency
adjuster also turns the TT BUDDY® on and off.
SPIN ADJUSTPENT
TT BUDDY Pro is designed to offer you maximum control in creating your own table tennis
experience. Use the wired remote to adjust for the desired amount and type of spin. Here is how it
works:
The two dials on the remote control marked ‘Topspin’ and ‘Backspin’ determine how fast the top and
bottom projection wheels spin. To create a topspin ball, minimize the amount of backspin and increase
the topspin position on the dial. To create a no spin or knuckle ball, place both dials around the same
speed setting. To create a backspin ball, increase the backspin on the dial and decrease the topspin.
PROJECTION DISTANCE
Projection distance of the balls on the table can be adjusted using the wired remote as well. As
explained in the spin adjustment section, this feature is also dependent on the spin settings. To
increase the distance of the projected ball, increase the backspin dial. To decrease the distance of the
ball projected, lower the spin of the backspin dial. Regarding spin, adjust the topspin dial as necessary
to accommodate the location of the backspin dial.
TABLE POSITION/OSCILLATION
Since the TT BUDDY® is so compact, users can easily move it around on the table to create their
ideal shot. Place the TT BUDDY® near the corner to maximize the angles or place the TT BUDDY® at

4
the end of the table and maximize the speed to get a fast and strong shot from it. Take ball placement
a step further and set how fast you want the core to rotate as it shoots out balls.
ENVIRONMENT PROTECTION
After the product lifespan expired or if the possible repairing is uneconomic, dispose it according to the
local laws and environmentally friendly in the nearest scrapyard.
By proper disposal you will protect the environment and natural sources. Moreover, you can help
protect human health. If you are not sure in correct disposing, ask local authorities to avoid law
violation or sanctions.
TERMS AND CONDITIONS OF WARRANTY, WARRANTY CLAIMS
General Conditions of Warranty and Definition of Terms
All Warranty Conditions stated hereunder determine Warranty Coverage and Warranty Claim
Procedure. Conditions of Warranty and Warranty Claims are governed by Act No. 89/2012 Coll. Civil
Code, and Act No. 634/1992 Coll., Consumer Protection, as amended, also in cases that are not
specified by these Warranty rules.
The seller is SEVEN SPORT s.r.o. with its registered office in Borivojova Street 35/878, Prague
13000, Company Registration Number: 26847264, registered in the Trade Register at Regional Court
in Prague, Section C, Insert No. 116888.
According to valid legal regulations it depends whether the Buyer is the End Customer or not.
“The Buyer who is the End Customer” or simply the “End Customer” is the legal entity that does not
conclude and execute the Contract in order to run or promote his own trade or business activities.
“The Buyer who is not the End Customer” is a Businessman that buys Goods or uses services for the
purpose of using the Goods or services for his own business activities. The Buyer conforms to the
General Purchase Agreement and business conditions.
These Conditions of Warranty and Warranty Claims are an integral part of every Purchase Agreement
made between the Seller and the Buyer. All Warranty Conditions are valid and binding, unless
otherwise specified in the Purchase Agreement, in the Amendment to this Contract or in another
written agreement.
Warranty Conditions
Warranty Period
The Seller provides the Buyer a 24 months Warranty for Goods Quality, unless otherwise specified in
the Certificate of Warranty, Invoice, Bill of Delivery or other documents related to the Goods. The legal
warranty period provided to the Consumer is not affected.
By the Warranty for Goods Quality, the Seller guarantees that the delivered Goods shall be, for a
certain period of time, suitable for regular or contracted use, and that the Goods shall maintain its
regular or contracted features.
The Warranty does not cover defects resulting from (if applicable):
•User’s fault, i.e. product damage caused by unqualified repair work, improper assembly,
insufficient insertion of seat post into frame, insufficient tightening of pedals and cranks
•Improper maintenance
•Mechanical damages
•Regular use (e.g. wearing out of rubber and plastic parts, moving mechanisms, joints etc.)
•Unavoidable event, natural disaster
•Adjustments made by unqualified person

5
•Improper maintenance, improper placement, damages caused by low or high temperature,
water, inappropriate pressure, shocks, intentional changes in design or construction etc.
Warranty Claim Procedure
The Buyer is obliged to check the Goods delivered by the Seller immediately after taking the
responsibility for the Goods and its damages, i.e. immediately after its delivery. The Buyer must check
the Goods so that he discovers all the defects that can be discovered by such check.
When making a Warranty Claim the Buyer is obliged, on request of the Seller, to prove the purchase
and validity of the claim by the Invoice or Bill of Delivery that includes the product’s serial number, or
eventually by the documents without the serial number. If the Buyer does not prove the validity of the
Warranty Claim by these documents, the Seller has the right to reject the Warranty Claim.
If the Buyer gives notice of a defect that is not covered by the Warranty (e.g. in the case that the
Warranty Conditions were not fulfilled or in the case of reporting the defect by mistake etc.), the Seller
is eligible to require a compensation for all the costs arising from the repair. The cost shall be
calculated according to the valid price list of services and transport costs.
If the Seller finds out (by testing) that the product is not damaged, the Warranty Claim is not accepted.
The Seller reserves the right to claim a compensation for costs arising from the false Warranty Claim.
In case the Buyer makes a claim about the Goods that is legally covered by the Warranty provided by
the Seller, the Seller shall fix the reported defects by means of repair or by the exchange of the
damaged part or product for a new one. Based on the agreement of the Buyer, the Seller has the right
to exchange the defected Goods for a fully compatible Goods of the same or better technical
characteristics. The Seller is entitled to choose the form of the Warranty Claim Procedures described
in this paragraph.
The Seller shall settle the Warranty Claim within 30 days after the delivery of the defective Goods,
unless a longer period has been agreed upon. The day when the repaired or exchanged Goods is
handed over to the Buyer is considered to be the day of the Warranty Claim settlement. When the
Seller is not able to settle the Warranty Claim within the agreed period due to the specific nature of the
Goods defect, he and the Buyer shall make an agreement about an alternative solution. In case such
agreement is not made, the Seller is obliged to provide the Buyer with a financial compensation in the
form of a refund.
SEVEN SPORT s.r.o.
Registered Office: Borivojova 35/878, 130 00 Praha 3, Czech Republic
Headquarters: Delnicka 957, 749 01 Vitkov, Czech Republic
Warranty & Service Centre: Cermenska 486, 749 01 Vitkov, Czech Republic
CRN: 26847264
VAT ID: CZ26847264
Phone: +420 556 300 970
reklamace@insportline.cz
Web: www.insportline.cz
SK
INSPORTLINE s.r.o.
Headquarters, Warranty & Service centre: Elektricna 6471, 911 01 Trencin, Slovakia
CRN: 36311723
VAT ID: SK2020177082
Phone: +421(0)326 526 701

6
reklamacie@insportline.sk
Web: www.insportline.sk
Date of Sale: Stamp and Signature of Seller:
This manual suits for next models
1
Table of contents
Other Insportline Robotics manuals