INSTEON Mini Remote 2342-432 User manual

Page 1 of 15 2342-x32 Rev: 11/20/2012 4:13 PM
Mini Remote
INSTEON® Remote Control Keypad, 4 Scene
#2342-432 (EU)
#2342-532 (AUS/NZ)
Owner’s Manual

Page 2 of 15 2342-x32 Rev: 11/20/2012 4:13 PM
About Mini Remote ..................................................................................................................................... 3
Features and Benefits ................................................................................................................................. 4
What’s in the Box? ..................................................................................................................................... 4
Required Accessories ................................................................................................................................ 4
Optional Accessories ................................................................................................................................. 5
Getting Started ............................................................................................................................................ 6
Scenes .......................................................................................................................................................... 6
Make Mini Remote (Button) a Controller ................................................................................................... 6
Remove Mini Remote (Button) as a Controller.......................................................................................... 6
Using Mini Remote ...................................................................................................................................... 7
LED Behavior ............................................................................................................................................ 8
Turn Unit On/Off (Pocket Mode) ................................................................................................................ 8
Stuck Button .............................................................................................................................................. 8
Advanced Features ..................................................................................................................................... 8
Make Mini Remote Button a Controller of Multiple Responders ............................................................... 8
Remove Mini Remote Button as a Controller of Multiple Responders ...................................................... 8
Change Button Mode: 8 Button Toggle, 8 Button Non-Toggle, 4 Scene .................................................. 9
Turn LED Off (or Back On) ...................................................................................................................... 10
Turn Beeper On (or Back Off) ................................................................................................................. 10
Beeper Behavior ...................................................................................................................................... 10
LED Behavior during Setup ..................................................................................................................... 11
Factory Reset .......................................................................................................................................... 11
Specifications ............................................................................................................................................ 12
Troubleshooting ........................................................................................................................................ 13
Certification and Warranty ....................................................................................................................... 14
Declaration of Conformity ........................................................................................................................ 14
Limited Warranty ..................................................................................................................................... 15
Limitations ............................................................................................................................................ 15

Page 3 of 15 2342-x32 Rev: 11/20/2012 4:13 PM
About Mini Remote
INSTEON Mini Remote is the smallest, most versatile INSTEON controller in the world. This wireless 4-
button controller can easily be reconfigured to give you toggle control of up to 4 scenes and/or devices.
Mini Remote can be:
- Handheld (wireless remote)
- Mounted on wall with no trim plate (wireless keypad)
- Mounted on wall in a single-gang Decorator trim plate (wireless keypad, built-in look)
- Mounted on wall in a multi-gang Decorator trim plate (add to the number of controllers in your room
without hiring an electrician and/or tearing out drywall)
- Placed on a Tabletop Stand (sold separately)
- Clipped to your car’s visor with Visor Clip (sold separately)
On/Off button pairs
(Left Off, Right On)
Status LED
Power/Recharging Jack
(Micro-USB, 5VDC)
Set
button
On/Off switch

Page 4 of 15 2342-x32 Rev: 11/20/2012 4:13 PM
Features and Benefits
• Small, elegant design
• Rechargeable battery included
• Controls up to 4 scenes (default) or 8 scenes (in toggle/non-toggle mode)
• Wall-mountable (requires wall-mount bracket and decorator trim plate, sold separately)
• Usable with tabletop stand (sold separately)
• Usable as a car visor-mounted remote (sold separately)
• Dual-color LED blinks green when turning on a scene on and red when turning off a scene
• Power switch to disable buttons
• Beeper for easy setup
• Recharges with standard charger with via Type A to Micro-B cable (sold separately)
• 9-12 month battery life based on average usage
• Battery charge LED indicator built-in
• Low battery transmit warning (use with software to trigger email/text message)
• All settings stored in non-volatile memory and preserved even through power loss
• 2-year warranty
What’s in the Box?
• Mini Remote
• Rechargeable battery (pre-installed)
• Quick Start Guide
Required Accessories
• A Type A to Micro-B USB cable to connect and recharge Mini Remote
using a computer or USB power adapter
Type A to Micro-B cable
(2444B5)

Page 5 of 15 2342-x32 Rev: 11/20/2012 4:13 PM
Optional Accessories
Visor Clip
(available in the 2444BWH kit)
• Control your home from your vehicle
• Turn lights on when you arrive and off as
you leave
Tabletop Stand
(available in the 2444BWH kit)
• Perfect for a nightstand, kitchen counter or
coffee table
USB Power Adapter
(2444B6)
• For use with Mini Remote USB Charging
Cable (requires adapter for regions
outside US)
Wall Mount Bracket
(2444B4)
• Wall-mount your Mini Remote anywhere
• Gang two or more together for more control
• Can be installed adjacent to existing wired-in switches
• Mini Remote can easily be removed for portability or
recharging
• Use with any decorator wallplate
Pair the Wall Mount Bracket with any decorator-style
wall plate (sold separately) for the perfect wireless
wall switch solution.

Page 6 of 15 2342-x32 Rev: 11/20/2012 4:13 PM
Getting Started
Fully charge your Mini Remote prior to programming or anytime the unit is not responding. Mini Remote
charges via USB cable (Type A to Micro-B, sold separately). The red charging LED will turn off once the
battery has been fully charged (approximately 1 hour). To turn on Mini Remote, simply slide the power
switch to the on position.
Note: Mini Remote uses a subtle beeper sound to assist setup. It is recommended that you program the
unit in a quiet area.
Scenes
Scene: One or more INSTEON devices which respond to an INSTEON controller. When the scene is
activated (turned “on”), all devices return to the states they were at when the scene was programmed.
INSTEON scenes let you activate dramatic lighting moods at the touch of a button. For example, you can
set all the lights in a scene to dim to 50% or turn certain lights on while turning others off, all with the tap
of a button on any INSTEON Controller. INSTEON scenes are easy to set up, just follow the directions
below.
Maximum number of scenes in Mini Remote Keypad: 8 (Default is 4)
Scene Control Functions supported; On, Off, Press and hold Bright, Press and hold Dim, Double-tap Fast
On and Double-tap Fast Off.
Make Mini Remote (Button) a Controller
1) Tap ^ on the Mini Remote scene button of choice
2) Adjust the responder to the state you want when the scene is activated from Mini Remote
3) Press and hold Mini Remote set button until it beeps
LED will begin blinking green
4) Press and hold responder set button until the responder beeps or its LED flashes
Mini Remote will double-beep and its LED will stop blinking
Responder LED will stop blinking (it may also double-beep)
5) Confirm that scene addition was successful by tapping the programmed Mini Remote button on/off
The responder will toggle between the scene’s preset on-level and off
6) If you wish to add more responders to Mini Remote, repeat steps 1-5 for each additional scene
responder (or see Make Mini Remote a Controller of Multiple Responders)
Remove Mini Remote (Button) as a Controller
If you are no longer going to use an INSTEON responder that is a scene responder of Mini Remote, it is
very important that you remove its scene membership. Otherwise, Mini Remote will retry every scene
command repetitively, thus creating delays and shortening battery life.
1) Tap the Mini Remote scene button of choice (^ or v will both work)
2) Press and hold Mini Remote set button until it beeps
LED will begin blinking green
3) Press and hold Mini Remote set button until it beeps again

Page 7 of 15 2342-x32 Rev: 11/20/2012 4:13 PM
LED will begin blinking red
4) Press and hold responder set button until it double-beeps and/or its LED blinks
Mini Remote will double-beep and its LED will stop blinking
5) Confirm that scene removal was successful by tapping the Mini Remote button on/off
Responder will not respond
6) If you wish to add more responders to Mini Remote, repeat steps 1-5 for each additional scene
responder (or see Remove Mini Remote as a Controller of Multiple Responders)
Using Mini Remote
4 Scene Mode (Default)
Each on/off button pair controls its scene members as follows:
Button
Side
Icon
Tap
Press and hold
Double-tap
On Right ^ Turn scene on Brighten until release
(dimmable responders only)
Instant full-on
Off Left v Turn scene off Dim until release
(dimmable responders only)
Instant full-off
8 Scene Toggle Mode
Each button controls its scene members as follows:
Last Command Sent
Tap
Press and hold
Double-tap
Off/Dim Turn scene on Brighten until release
(dimmable responders only)
Instant full-on
On/Bright Turn scene off Dim until release
(dimmable responders only)
Instant full-off
8 Scene Non-Toggle Mode (Always On)
Each button controls its scene members as follows:
Tap
Press and hold
Double-tap
On Brighten until release
(dimmable responders only)
Instant full-on
Note: Devices that respond to the scene trigger by turning off and non-dimmable devices will not respond
to dim and brighten commands.

Page 8 of 15 2342-x32 Rev: 11/20/2012 4:13 PM
LED Behavior
Mini Remote has a two-color LED (Green and Red) which momentarily indicates whether an on or an off
is being sent.
LED State
Meaning
Blink Green (Once)
On sent
Blink Red (Once)
Off sent
Blink Red (for a few
seconds)
One or more scene members did not acknowledge (note: scene members
may still have heard the scene command and adjusted their settings)
Turn Unit On/Off (Pocket Mode)
The Mini Remote features a power switch located next to the set button. If you plan on carrying the Mini
Remote in your pocket it is recommended that you turn it off to prevent buttons from accidentally being
pressed. This is also recommended if your Mini Remote will not be in use for long periods of time.
Stuck Button
If a button on Mini Remote is held for more than 4 minutes, Mini Remote will automatically stop
transmitting to preserve battery life. The Mini Remote will automatically turn back on when the button that
was depressed is no longer being pressed.
Advanced Features
Make Mini Remote Button a Controller of Multiple Responders
1) Tap Mini Remote scene button of choice (^ or v will both work)
2) Press and hold set button until it beeps
LED will begin blinking green
3) Tap set button
LED will begin double-blinking green
4) Adjust each responder to the desired state, then press and hold responder set button until Mini
Remote double-beeps
LED will continue double-blinking green
5) When all your devices have been added, tap Mini Remote’s set button
Mini Remote will double-beep and its LED will turn off
Remove Mini Remote Button as a Controller of Multiple Responders
1) Tap Mini Remote scene button of choice (^ or v will both work)
Power Switch
(right On, left Off)

Page 9 of 15 2342-x32 Rev: 11/20/2012 4:13 PM
2) Press and hold set button until it beeps
LED will begin blinking green
3) Press and hold set button a 2nd time for 3 seconds - until you hear a beep
LED will begin blinking red
4) Tap set button
LED will begin double-blinking red
5) For each responder you wish to remove, press and hold its set button until Mini Remote double-
beeps
LED will continue double-blinking red
6) When all responders have been removed, tap Mini Remote’s set button
Mini Remote will double-beep and its LED will turn off
Change Button Mode: 8 Button Toggle, 8 Button Non-Toggle, 4 Scene
1) Press and hold set button until it beeps
LED will begin blinking green
2) Press and hold set button until it beeps again
LED will begin blinking red
3) Press and hold set button until it beeps a third time
LED will begin blinking green
4) Press and hold set button until it beeps a fourth time
LED will begin blinking red
5) Tap set button
LED will begin double-blinking red
6) Press the appropriate button for the desired button/scene configuration:
Desired Configuration
Button to Press
8 Button Toggle
d, v
8 Button Non-Toggle (Always On)
a, v
4 Scene (Default)
a, ^
Mini Remote will double-beep and its LED will turn off
7) Confirm by tapping the top left button (a, v) on Mini Remote several times
LED will flash as follows:
Flash Pattern
Configuration
Red
4 scene
Green
8 scene non-toggle (always on)
Alternating green/red
8 scene toggle

Page 10 of 15 2342-x32 Rev: 11/20/2012 4:13 PM
Turn LED Off (or Back On)
1) Press and hold set button until it beeps
LED will begin blinking green
2) Press and hold set button until it beeps again
LED will begin blinking red
3) Press and hold set button until it beeps a third time
LED will begin blinking green
4) Press the appropriate button for the desired button/scene configuration
Desired LED Mode
Button to Press
LED Off
a, v
LED On (default)
a, ^
Mini Remote will double-beep and its LED will turn off
Turn Beeper On (or Back Off)
By default, the beeper is disabled on Mini Remote. Follow these instructions to enable it:
1) Press and hold set button until it beeps
LED will begin blinking green
2) Press and hold set button until it beeps again
LED will begin blinking red
3) Press and hold set button until it beeps a third time
LED will begin blinking green
4) Tap set button
LED will begin double-blinking green
5) Press the appropriate button for the desired button/scene configuration
Desired Beeper Mode
Button to Press
Off (Default)
a, v
On
a, ^
Mini Remote will double-beep and its LED will turn off
Beeper Behavior
Command Method
Beeper Disabled
(Default) Beeper Enabled
On
Tap
-
Single beep
Off
Tap
-
Single beep
Fast-On
Double-Tap
-
Single beep
Fast-Off
Double-Tap
-
Single beep

Page 11 of 15 2342-x32 Rev: 11/20/2012 4:13 PM
Begin Bright
Press and hold
-
Single beep
Begin Dim
Press and hold
-
Single beep
Setup Action
Beeper
Enter setup mode, transition to next setup mode or exit
setup mode Single beep
Setup successful, return to ready mode
Double-beep
Return to ready mode after a longer than 3 minute time-out
Long beep (3 seconds)
Failed to add scene responder
Long beep (3 seconds)
Exiting stuck button
Long beep (3 seconds)
LED Behavior during Setup
Mini Remote has a two-color LED (Green and Red) which displays helpful information.
LED State
Meaning
Blinking Green slowly
Add Responder Setup Mode, or
LED on/off Setup Mode
Blinking Red slowly
Remove Responder Setup Mode
Double-Blinking Green slowly
Multi-Add Responder Setup Mode, or
Beeper on/off Setup Mode
Double-Blinking Red slowly
Multi-Remove Responder Setup Mode, or
Keypad Configuration Setup Mode
Factory Reset
The factory reset procedure clears all settings from Mini Remote, including INSTEON scenes.
1) If possible, unlink (remove) all scene responders prior to performing factory reset
2) Turn Mini Remote off (slide power switch to left)
3) Press and hold set button
4) While continuing to hold the set button, turn Mini Remote back on (slide power switch to the right). Do
not release set button.
Mini Remote will beep and LED will turn solid green
Mini Remote will emit a long beep
5) Continue holding set button until long beep stops, then release set button
LED will turn solid red
Mini Remote will double-beep and its LED will turn off

Page 12 of 15 2342-x32 Rev: 11/20/2012 4:13 PM
Specifications
General
Product Name
Mini Remote – INSTEON Wireless Keypad
Brand
INSTEON
Manufacturer Product Number
EU: 2342-432
AUS/NZ: 2342-532
UPC
EU: 813922012583
AUS/NZ: 813922012590
Patent
Protected under U.S. and foreign patents (see
www.insteon.com)
Warranty
2 Year, Limited
INSTEON
Scenes
4 (default), configurable to 8
Scene Configurations
4 On/Off (default), 8 Toggle or 8 Always On
Maximum scene Links
400
Scene Commands Supported
On
Off
Begin Brightening
Begin Dimming
End Brightening
End Dimming
Fast On
Fast Off
Software Configurable
Yes
Operation
LED Type
Two-color: Green and Red
LED during Use
Green Flash Once
On (sent)
Bright
Fast-On
Red Flash Once
Off
Dim
Fast-Off
Red Blink for ~3 Seconds
Scene Acknowledge Missing
LED
Always used for setup, default On during use
Setup Button
Yes
On/Off Switch
Yes
Beeper
Yes, configurable
Battery Charging LED
Yes, embedded (shines red through case during charge)
RF Range
50’ Line-of-Sight
Retains all settings without power
Yes, all saved in Non-volatile EEPROM

Page 13 of 15 2342-x32 Rev: 11/20/2012 4:13 PM
Mechanical
Color
White
Plastic
UV Stabilized ABS
Dimensions
6.6cm x 3.3cm x 1.0cm
Weight
28g
Button Style
Plastic Paddles over Contact Switches
Optional Hardware
Wall Mount
Tabletop Stand
Visor Clip
Operating Environment
Indoors, 0°C to 40°C, up to 85% relative humidity
Electrical
Battery type
3.7 VDC Lithium Polymer, Rechargeable, non-replaceable
Battery life (between charges)
9-12 months under standard usage
Battery Re-charging cycles
> 500 recharging cycles
Recharging jack
Standard, Micro-USB, 5VDC
Recharging time
1 hour
Troubleshooting
Problem
Possible Cause
Solution
Mini Remote won’t add a
scene responder
Mini Remote may be out of range of
nearest INSTEON device Try moving Mini Remote closer to responder
Mini Remote will not turn on a
responder (it may turn it off)
Responder ramp rate may be
extremely slow
Relink to responder with faster ramp rate
Responder may be linked at off Relink to responder, making sure it’s linked at on
Responder’s load doesn’t
appear to turn on right away
Responder ramp rate may be set
too slow Relink to responder with faster ramp rate
Responder(s) is taking a long
time to respond to a Mini
Remote
Mini Remote may be sending
commands to a responder(s) that is
no longer in use
Remove all unused responders from the Mini
Remote. HINT: If you are using home automation
software, you can easily check scene membership
and eliminate unnecessary links.
If the above doesn’t work, try the solutions for “Mini
Remote will not turn on a responder.”
Mini Remote blinks red after I
turn a scene on or off
One or more scene members is not
responding
Monitor for recurrence and if recurs:
a) Remove all scene responders that are no

Page 14 of 15 2342-x32 Rev: 11/20/2012 4:13 PM
Problem
Possible Cause
Solution
One or more scene members is not
responding and HouseLinc (or other
software) is attempting to
communicate to Mini Remote
longer in use, or
b) Add INSTEON devices for better signaling
Mini Remote is locked up Mini Remote may have glitched
Power cycle Mini Remote by turning it off (slide
power switch to left), waiting 10 seconds and
turning it back on (slide power switch to right)
Perform a factory reset on Mini Remote
If you have tried these solutions, reviewed this Owner’s Manual, and still cannot resolve an issue, visit
www.insteon.com/support for online support and updated product documents
or call INSTEON Support Line at 866-243-8022
Certification and Warranty
Declaration of Conformity
DECLARATION OF CONFORMITY
Hereby, INSTEON declares that this device is in compliance with the essential requirements and other relevant provisions of the following Directives:
1) Electromagnetic Compatibility Directive 2004/108/EC
2) Hazardous Substance Directive 2005/95/EC
Technical data and copies of the original Declaration of Conformity are available and can be obtained from INSTEON; 16542 Millikan Ave, Irvine, CA,
USA.
User Information for Consumer Products Covered by EU Directive 2002/96/EC on Waste Electric and Electronic Equipment (WEEE)
This document contains important information for users with regards to the proper disposal and recycling of INSTEON products. Consumers are
required to comply with this notice for all electronic products bearing the following symbol:
Environmental Information for Customers in the European Union
European Directive 2002/96/EC requires that the equipment bearing this symbol on the product and/or its packaging must not be disposed of with
unsorted municipal waste. The symbol indicates that this product should be disposed of separately from regular household waste streams.
It is your responsibility to dispose of this and other electric and electronic equipment via designated collection facilities appointed by the government or
local authorities. Correct disposal and recycling will help prevent potential negative consequences to the environment and human health.
For more detailed information about the disposal of your old equipment, please contact your local authorities, waste disposal service, or the shop
where you purchased the product.
DECLARATION OF CONFORMITY TO R&TTE DIRECTIVE 1999/5/EC for the European Community, Switzerland, Norway, Iceland and Liechtenstein
Product category: general consumer (category 3).
English: This equipment is in compliance with the essential requirements and other relevant provisions of the European R&TTE Directive 1999/5/EC
Deutsch [German]: Dieses Gerät entspricht den grundlegenden Anforderungen und den weiteren entsprechenden Vorgaben der Richtlinie 1999/5/EU.
Nederlands [Dutch]: Dit apparaat voldoet aan de essentiele eisen en andere van toepassing zijnde bepalingen van de Richtlijn 1999/5/EC.
Svenska [Swedish]: Denna utrustning står I överensstämmelse med de väsentliga egenskapskrav och övriga relevanta bestämmelser som framgår av
direktiv 1999/5/EG.
Français [French]: Cet appareil est conforme aux exigences essentielles et aux autres dispositions pertinentes de la Directive 1999/5/EC
Español [Spanish]: Este equipo cumple con los requisitos esenciales asi como con otras disposiciones de la Directiva 1999/5/CE.
Português [Portuguese]: Este equipamento está em conformidade com os requisitos essenciais e outras provisões relevantes da Directiva 1999/5/EC.
Italiano [Italian]: Questo apparato é conforme ai requisiti essenziali ed agli altri principi sanciti dalla Direttiva 1999/5/CE.
Norsk [Norwegian]: Dette utstyret er i samsvar med de grunnleggende krav og andre relevante bestemmelser i EU-direktiv 1999/5/EF.
Suomi [Finnish]:Tämä laite tÿttää direktiivin 1999/5/EY olennaiset vaatimukset ja on siinä asetettujen muiden laitetta koskevien määräysten mukainen.
Dansk [Danish]: Dette udstyr er i overensstemmelse med de væsentlige krav og andre relevante bestemmelser i Direktiv 1999/5/EF.
Polski [Polish]: Urządzenie jest zgodne z ogólnymi wymaganiami oraz szczególnymi warunkami okreslonymi Dyrektywą UE: 1999/5/EC

Page 15 of 15 2342-x32 Rev: 11/20/2012 4:13 PM
Limited Warranty
Seller warrants to the original consumer purchaser of this product that, for a period of two years from the date of purchase, this product will be free
from defects in material and workmanship and will perform in substantial conformity to the description of the product in this Owner’s Manual. This
warranty shall not apply to defects or errors caused by misuse or neglect. If the product is found to be defective in material or workmanship, or if the
product does not perform as warranted above during the warranty period, Seller will either repair it, replace it, or refund the purchase price, at its
option, upon receipt of the product at the address below, postage prepaid, with proof of the date of purchase and an explanation of the defect or error.
The repair, replacement, or refund that is provided for above shall be the full extent of Seller’s liability with respect to this product. For repair or
replacement during the warranty period, call the INSTEON Gold Support Line at 800-762-7845 with the Model # and Revision # of the device to receive
an RMA# and send the product, along with all other required materials to:
INSTEON
ATTN: Receiving
16542 Millikan Ave.
Irvine, CA 92606-5027
Limitations
The above warranty is in lieu of and Seller disclaims all other warranties, whether oral or written, express or implied, including any warranty or
merchantability or fitness for a particular purpose. Any implied warranty, including any warranty of merchantability or fitness for a particular purpose,
which may not be disclaimed or supplanted as provided above shall be limited to the two-years of the express warranty above. No other representation
or claim of any nature by any person shall be binding upon Seller or modify the terms of the above warranty and disclaimer.
Home automation devices have the risk of failure to operate, incorrect operation, or electrical or mechanical tampering. For optimal use, manually verify
the device state. Any home automation device should be viewed as a convenience, but not as a sole method for controlling your home.
In no event shall Seller be liable for special, incidental, consequential, or other damages resulting from possession or use of this device, including
without limitation damage to property and, to the extent permitted by law, personal injury, even if Seller knew or should have known of the possibility of
such damages. Some states do not allow limitations on how long an implied warranty lasts and/or the exclusion or limitation of damages, in which case
the above limitations and/or exclusions may not apply to you. You may also have other legal rights that may vary from state to state.
Protected under U.S. and foreign patents (see www.insteon.com)
© Copyright 2012 INSTEON, 16542 Millikan Ave., Irvine, CA 92606, 800-762-7845, www.insteon.com

Page 1 of 15 : 11/20/2012 4:14 PM
Mini Remote
INSTEON® Remote Control Switch
2342-442 EU
2342-542 AUS/NZ
Owners Manual

Page 2 of 15 : 11/20/2012 4:14 PM
About Mini Remote ..................................................................................................................................... 3
Features and Benefits ................................................................................................................................. 4
What’s in the Box? ..................................................................................................................................... 4
Required Accessories ................................................................................................................................ 4
Optional Accessories ................................................................................................................................. 5
Getting Started ............................................................................................................................................ 6
Scenes .......................................................................................................................................................... 6
Make Mini Remote a Controller ................................................................................................................. 6
Remove Mini Remote as a Controller ....................................................................................................... 6
Using Mini Remote ...................................................................................................................................... 7
LED Behavior ............................................................................................................................................ 8
Turn Unit On/Off (Pocket Mode) ................................................................................................................ 8
Stuck button ............................................................................................................................................... 8
Advanced Features ..................................................................................................................................... 8
Make Mini Remote a Controller of Multiple Responders ........................................................................... 8
Remove Mini Remote as a Controller of Multiple Responders ................................................................. 9
Change Paddle / Scene Configuration (e.g. Change to 2 Scene Mode) .................................................. 9
Turn LED Off (or Back On) ...................................................................................................................... 10
Turn Beeper On (or Back Off) ................................................................................................................. 10
Beeper Behavior ...................................................................................................................................... 11
LED Behavior during Setup ..................................................................................................................... 11
Factory Reset .......................................................................................................................................... 11
Specifications ............................................................................................................................................ 12
Troubleshooting ........................................................................................................................................ 13
Certification and Warranty ....................................................................................................................... 15
Declaration of Conformity ........................................................................................................................ 15
Limited Warranty ..................................................................................................................................... 15
Limitations ............................................................................................................................................ 15

Page 3 of 15 : 11/20/2012 4:14 PM
About Mini Remote
Mini Remote is the smallest and most versatile INSTEON Remote Control in the world. The 1 scene
Controller can easily be reconfigured to give you toggle control of up to 2 scenes and/or devices. Mini
Remote can be:
- Handheld (wireless remote)
- Mounted on wall with no trim plate (wireless keypad)
- Mounted on wall in a single-gang decorator trim plate (wireless keypad, built-in look)
- Mounted on wall in a multi-gang decorator trim plate (add to the number of controllers in your room
without hiring an electrician and/or tearing out drywall)
- Placed on a Tabletop Stand (sold separately)
- Clipped to your car’s visor with Visor Clip (sold separately)
Paddle
Top On, Bottom Off
(1 scene mode)
Top On/Off, Bottom On/Off
(2 scene mode)
Status LED
Power/Recharging Jack
(Micro-USB, 5VDC)
Set
button
On/Off switch

Page 4 of 15 : 11/20/2012 4:14 PM
Features and Benefits
• Small, elegant design
• Rechargeable battery included
• Discreet On and Off buttons for 1 scene
• Can be reconfigured for 2 scene triggers or 2 scene On/Off toggle control
• Wall-mountable (requires wall-mount bracket and decorator trim plate, sold separately)
• Can be used as a table-top controller (requires Tabletop Stand)
• Can be used as a visor-mounted remote control for lights, garage door opener etc. (requires Visor Clip)
• Dual-color LED blinks green when turning on a scene on and red when turning off a scene
• Power switch to disable buttons
• Stuck Button Mode – saves battery life by going to sleep if button stuck down
• Beeper for easy setup
• Recharges with standard charger with via Type A to Micro-B cable (sold separately)
• 9-12 month battery life based on average usage
• Battery charge LED indicator built-in
• Low battery transmit warning (use with software to trigger email/text message)
• All settings stored in non-volatile memory and preserved even through power loss
• 2-year warranty
What’s in the Box?
Mini Remote
Rechargeable battery (pre-installed)
Quick-Start Guide
Required Accessories
• A micro USB cable for connecting and recharging Mini Remote via USB
port on a computer or USB power adapter.
• If the INSTEON device you intend to control does not receive RF signals
(i.e., power line only), you will need at least one dual-band INSTEON
device to convert the RF signals to power line signals.
Type A to Micro-B cable
(2444B5)

Page 5 of 15 : 11/20/2012 4:14 PM
Optional Accessories
Visor Clip
(Available in the 2444BWH kit)
• Control your home from your vehicle
• Turn lights on when you arrive and off as
you leave
Tabletop Stand
(Available in the 2444BWH kit)
• Perfect for a nightstand, kitchen counter or
coffee table
USB Power Adapter
(2444B6)
• For use with Mini Remote USB Charging
Cable (requires adapter for regions
outside US)
Wall Mount Bracket
(2444B4)
• Wall mount your Mini Remote anywhere
• Gang two or more together for more control
• Can be installed adjacent to existing wired-in switches
• Mini Remote can easily be removed for portability or
recharging
• Use with any decorator wallplate
•
Pair the Wall Mount Bracket with any decorator style
wall plate (sold separately) for the perfect wireless
wall switch solution.