INSTEON 2842-222 User manual

INSTEON Motion Sensor
2842-222
Quick Start Guide

®
INSTEON Motion Sensor
Set Button
(Cover Removed)
Status LED
9V Battery
(Included)
Settings
Jumpers
Wall Mount
Retention Slot

Jumper Settings
To congure settings like Night-Only mode
and Light Sensitivity via the INSTEON Hub,
ensure jumper ve is installed over both pins.

Sensor Placement
Ax the mount to a surface and slide the
mount into the retention slot on the rear of the
sensor. Avoid areas of rapid heat change.
Motion Sensor detection areas
®
NEW
X
10’
20’
40’

1Follow the on-screen instructions to add
your Motion Sensor to the INSTEON Hub.
Linking to the Hub
+
If not using the Hub, refer to the
instructions that came with your product.
!

2Remove the back cover and when
prompted, press and hold the set button
until the status LED begins blinking.
Tap the set button. The status LED
will double-blink.
NEW
X

INSTEON
Schedule
Time of Day
Sunrise
Sunset
Congure Alerts
Trigger a Scene
To receive email and text message alerts when
motion is detected, switch on alerts from
device settings within the INSTEON app.
Add your Motion Sensor to a scene using the
INSTEON Hub and it will control the scene.
!
!

RAW-1297 Rev 03.13.14
Protected under U.S. and foreign patents (see www.insteon.com/patents)
©2014 INSTEON
MANUAL
Learn More
For the complete Owner’s Manual, video
tutorials, product support and more, visit:
insteon.com/support