INSTEON 2845-x22 User manual

Hidden Door Sensor
2845-x22
Quick Start Guide
Contact
Plunger

®
Door Sensor
Model: 2845-222
®
Door Sensor
Model: 2845-222
®
Door Sensor
Model: 2845-222
Hidden Door Sensor
Set
Button
Status
LED
Contact
Plunger
Battery Isolation Tab
(Remove before rst use)
AAA Battery
(Included)
Spacer

Phillips Screwdriver
Tools Needed for Installation
Power Drill
3/4-inch Auger Drill Bit
(Recommended)
We recommend using
Irwin Tools #88812 Speedbor Bit

Test Your Location
Test your desired location rst. Hold the
Door Sensor in its intended location and
try linking to your Hub or responder. If
linking is unsuccessful, try repositioning
the sensor or adding a Range Extender.
®
Door Sensor
Model: 2845-222
1

AFollow the on-screen instructions to add
your Door Sensor to the INSTEON Hub.
Linking to the Hub
+
If not using the Hub, refer to the
instructions that came with your product.

®
Door Sensor
Model: 2845-222
BWhen prompted, press and hold the
Door Sensor’s set button until the
device beeps.

2Locate the hole for Door Sensor in either
the hinge-side of the door frame or the
hinge-side of the door itself.
Also works with casement windows. Use
Open/Close Sensor (2843-222) for sash windows.
Installation
X
X
X

3Place masking tape over any surfaces
that may be marred by the drill chuck
and drill a 4-inch deep, ¾-inch diameter
hole. If drilling into the door, have an
assistant hold the door steady.

4Clean out any wood shavings with a
vacuum and test t the sensor. When
ready, insert the sensor into the hole
and fasten with the included screw.
Installation of your Door Sensor is
now complete.

If the gap between your door and door frame is
too wide for Door Sensor, try using the included
spacer. Slide the spacer over the Door Sensor
to increase the thickness of the collar.
Spacer
®
Door Sensor
Model: 2845-222

Congure Alerts
To receive email and text message alerts when
a door or window is opened, switch on alerts
from device settings within the INSTEON app.
!

Rev 12.17.13
Protected under U.S. and foreign patents (see www.insteon.com/patents)
©2013 INSTEON
MANUAL
Learn More
For the complete Owner’s Manual, video
tutorials, product support and more, visit:
insteon.com/support