Integra DSX-3 User manual

Before Start
What's in the box .................................................................... 2
Part Names
Front Panel ............................................................................. 3
Rear Panel .............................................................................. 4
Remote Controller .................................................................. 5
Display .................................................................................... 6
Install
1. Connect the Speakers ........................................................ 7
2. Connect the TV ................................................................. 10
3. Connect the HDMI AV Components ..................................11
4. Connect the Audio Components ....................................... 12
5. Connect Other Cables ...................................................... 13
Initial Setup
Initial Setup with Auto Start-up Wizard ................................. 14
Playback
AV Component Playback ...................................................... 17
Internet Radio ....................................................................... 18
Spotify ................................................................................... 20
Music Server ......................................................................... 21
USB Storage Device ............................................................. 23
AirPlay® ................................................................................ 25
BLUETOOTH® Playback ......................................................26
Listening to the FM Radio ..................................................... 27
Listening Modes ................................................................... 28
Quick Menu .......................................................................... 46
Other Functions .................................................................... 48
Advanced Setup
Setup Menu ........................................................................... 49
Control Function Settings ...................................................... 62
Firmware Update
Firmware Update .................................................................. 63
Others
Troubleshooting .................................................................... 66
General Specifications .......................................................... 71
About HDMI .......................................................................... 73
License and Trademark Information ..................................... 74
> Before Start > Part Names > Install > Initial Setup > Playback
Advanced Setup | Firmware Update | Others
AV Receiver
DSX-3
Instruction
Manual

2
> Before Start > Part Names > Install > Initial Setup > Playback
Advanced Setup | Firmware Update | Others
Before Start
What's in the box
0 Connect speakers with 4 Ω to 8 Ω impedance.
0 The power cord must be connected only after all other cable connections are completed.
0We will not accept responsibility for damage arising from the connection of equipment
manufactured by other companies.
0Functionality may be introduced by firmware updates and service providers may cease
services, meaning that some network services and content may become unavailable in
the future. Furthermore, available services may vary depending on your area of
residence.
0Specifications and appearance are subject to change without prior notice.
0We plan to provide support for the Dolby Atmos and DTS:X audio format through a
firmware update for this unit. Refer to our website for more information.
Main unit (1)
Remote controller (RC-936R) (1), batteries (AAA/R03) (2)
Speaker setup microphone (1)
Indoor FM antenna (1)
Power cord (1)

> Before Start >PartNames > Install > Initial Setup > Playback
Advanced Setup | Firmware Update | Others
3
Part Names
Front Panel
1. ÍOn/Standby button: Turns the unit on or into standby mode.
2. Hybrid Standby indicator: Lights if the unit enters standby mode when the features are
enabled that continue to work when this unit is in standby, such as HDMI Standby
Through and Network Standby.
3. Display (ÄP6)
4. Remote control sensor
5. Volume dial: Allows you to adjust the volume.
6. USB port: A USB storage device is connected so that music files stored in it can be
played. You can also supply power (maximum 5 V/1 A) to USB devices with a USB cable.
7. Phones jack: Stereo headphones with a mini plug (φ3.5 mm) are connected.
8. Input button: Switches the input to be played. (BD/DVD / CBL/SAT / GAME / STRM BOX /
CD / TV / PHONO / FM / NET / USB / BLUETOOTH)
9. Listening Mode button: Allows you to select the listening mode. (ÄP28)
10. Tuning43buttons: Select the frequency of FM radio stations.
  
    


4
> Before Start >PartNames > Install > Initial Setup > Playback
Advanced Setup | Firmware Update | Others
Rear Panel
1. TUNER FM 75Ω jack: Connect the supplied antenna.
2. Wireless antenna: Raise for Wi-Fi connection or when using a BLUETOOTH enabled
device. The diagram shows the movable range for the wireless antenna. Do not try to
force it beyond this range otherwise you may break it.
3. AUDIO IN jacks: Input TV or AV component audio signals with an analog audio cable.
4. GND terminal: The ground wire of the turntable is connected.
5. DIGITAL IN OPTICAL/COAXIAL jacks: Input TV or AV component digital audio signals
with a digital optical cable or digital coaxial cable.
6. IR IN jack: Allows you to connect a multiroom remote control kit.
7. SETUP MIC jack: The supplied speaker setup microphone is connected.
8. AC INLET: The supplied power cord is connected.
9. ETHERNET port: Connect to the network with an Ethernet cable.
10. HDMI OUT jack: Connect a HDMI cable to transfer video signals and audio signals to a
TV.
11. HDMI IN jacks: Input video signals and audio signals with a HDMI cable connected to an
AV component.
12. SPEAKERS terminals: Connect speakers or passive subwoofers with speaker cables.
13. SUBWOOFER PRE OUT jack: Connect a powered subwoofer with a subwoofer cable.
180°
90°

 



  





> Before Start >PartNames > Install > Initial Setup > Playback
Advanced Setup | Firmware Update | Others
5
Remote Controller
1. Í button: Turns the unit on or into standby mode.
2. Input selector buttons: Switches the input to be played.
3. Q (Quick Menu) button: You can perform common settings on the TV screen. (ÄP46)
4. Cursors, Enter button: Select the item with the cursors and press Enter to confirm.
5. button: Displays the Setup menu.
( Ä P49)
6. Volume buttons: Allows you to adjust the volume. This button also cancels the muting.
7. button: Temporarily mutes audio. Press again to cancel muting.
8. Listening mode buttons: Allows you to select the listening mode. (ÄP28)
9. Play buttons: You can start play of the Music Server or USB.
10. button: You can start repeat or random play of the Music Server or USB.
Clear button: Deletes all characters you have entered when entering text on the TV
screen.
11. Dimmer button: You can adjust the brightness of the display in three steps. It cannot be
turned off completely.
12. button: Switches the information on the display.
13. button: Returns the display to the previous state during setting.
14. Mode button: Switches tuning to an FM station between automatic tuning and manual
tuning.
15. Memory button: Used to register FM radio stations.















30°
30°
Approx.5 m
(16 ft.)

6
> Before Start >PartNames > Install > Initial Setup > Playback
Advanced Setup | Firmware Update | Others
Display
1. Lights in the following conditions.
HDMI: HDMI signals are input and selected.
ARC: Audio signals from the ARC compatible TV are input and selected.
USB: When "USB" is selected with the input selector and the unit is connected by USB
and the USB device is selected. Flashes if the USB is not properly connected.
NET: When "NET" is selected with the input selector and the unit is connected to the
network. It will flash if the connection to the network is not correct.
DIGITAL: Digital signals are input and the digital input selector is selected.
2. Lights when operating the "NET" or "USB" input selector indicating remote controller
cursor operations are possible in screens showing list of tracks, for example.
3. Lights when headphones are connected.
4. Lights when operating the "NET" or "USB" input selector when tracks are played or
paused.
5. Lights according to the type of input digital audio signals and the listening mode.
6. Lights in the following conditions.
AUTO: When tuning mode is auto.
TUNED: Receiving FM radio.
FM STEREO: Receiving FM stereo.
SLEEP: Sleep timer has been set.
ASb: When Auto Standby function is enabled. (ÄP59)
7. Flashes when muting is on.
8. Displays various information of the input signals. Characters that cannot be displayed on
this unit are replaced with asterisks ( ＊).

Neo:6




 

7
> Before Start > Part Names >Install > Initial Setup > Playback
Advanced Setup | Firmware Update | Others
Install
1. Connect the Speakers
＊1
＊2
R
R
L
L
＊1: 22e to 30e, ＊2: 120e
12 Front Speakers
3Center Speaker
45 Surround Speakers
6Subwoofer
Install the speakers
Front speakers output front stereo sound and a center
speaker outputs center sound such as dialogs and vocals.
Surround speakers create back sound field. Powered
subwoofer reproduces bass sounds and creates rich sound
field.
The front speakers should be positioned at ear height, while
the surround speakers should be positioned just above ear
height. Center speaker should be set up facing the listening
position. Place the powered subwoofer towards the front.
Placing it between the center speaker and a front speaker
gives you a natural sound even when playing music.

8
> Before Start > Part Names >Install > Initial Setup > Playback
Advanced Setup | Firmware Update | Others
a Speaker cable, b Subwoofer cable
1/2˝
(12 mm)
a
a
b
1
2
3
a
b
FRONT
R
SURROUND
R
SURROUND
L
CENTERFRONT
L
Powered
Subwoofer
Connect the speakers
Refer to the illustration to connect the speaker system.
Twist the wires of the speaker cable tightly before inserting
into the SPEAKERS terminals. Make correct connection
between the unit’s jacks and speaker’s jacks (i to i and j
to j) for each channel. If connection is wrong, a bass
sound may become poor due to reverse phase.
Either a powered subwoofer or passive subwoofer may be
connected. To connect a powered subwoofer, use a
subwoofer cable and connect to the SUBWOOFER PRE
OUT jack. To connect a passive subwoofer, connect to the
SPEAKERS terminals with speaker cables as shown below.

9
> Before Start > Part Names >Install > Initial Setup > Playback
Advanced Setup | Firmware Update | Others
Make sure the exposed wires of the speakers do not stick
out of the speaker terminals when connecting. If the
exposed wires of the speakers touch the rear panel or the +
and – wires touch each other, the protection circuit will be
activated. (ÄP66)
Setup
0Settings for the speaker configuration you have
connected need to be made in "1. AccuEQ Room
Calibration" (ÄP15) in Initial Setup.

10
> Before Start > Part Names >Install > Initial Setup > Playback
Advanced Setup | Firmware Update | Others
2. Connect the TV
a HDMI cable, b Digital optical cable
a
b
DIGITAL
OPTICAL OUT
1
To ARC TV
For a TV that supports the ARC (Audio Return Channel)
(ÄP73) feature, use an HDMI cable and connect according
to illustration "a". Choose an HDMI IN jack on the TV that
supports ARC when connecting.
To Non-ARC TV
For a TV that does not support the ARC (Audio Return
Channel) feature, connect both the HDMI cable in illustration
"a" and the digital optical cable in "b".
Setup
0Settings are required to use the ARC function. Select
"Yes" in "4. Audio Return Channel" (ÄP16) in the Initial
Setup.
0Please refer to the TV’s operation manual for directions
on connections and setup for the TV.